Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2380AIDGKT

Texas Instruments · Precision Op Amps · VSSOP-8

OPA2380AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Amplifier A output, with short-circuit current of 150mA typical and one amplifier per package shorted to ground continuously.
2 -In A input Amplifier A inverting input (summing junction in transimpedance use), diode clamped to the supply rails and limited to ±10mA if signals swing more than 0.5V beyond the rails.
3 +In A input Amplifier A non-inverting input, with common-mode range from V− to (V+) − 1.8V and diode clamped to the supply rails (current limit 10mA).
4 V- power_in Negative supply (or ground) for the op amps, with total supply range of 2.7V to 5.5V specified.
5 +In B input Amplifier B non-inverting input, with common-mode range from V− to (V+) − 1.8V and diode clamped to the supply rails (current limit 10mA).
6 -In B input Amplifier B inverting input (summing junction in transimpedance use), diode clamped to the supply rails and limited to ±10mA if signals swing more than 0.5V beyond the rails.
7 Out B output Amplifier B output, with short-circuit current of 150mA typical and one amplifier per package shorted to ground continuously.
8 V+ power_in Positive supply, specified from 2.7V to 5.5V with absolute maximum supply voltage of 7V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Specified Voltage Range VS 2.7 5.5 V 4
Input Offset Voltage VOS 4 25 µV VS = +5V, VCM = 0V 4
Offset Voltage Drift dVOS/dT 0.03 0.1 µV/°C 4
Power Supply Rejection Ratio PSRR 2.4 10 µV/V VS = +2.7V to +5.5V, VCM = 0V 4
Power Supply Rejection Ratio over temperature 10 µV/V Over Temperature; VS = +2.7V to +5.5V, VCM = 0V 4
Input Bias Current, Inverting Input IB -50 3 50 pA VCM = VS/2 4
Input Bias Current, Noninverting Input IB -200 3 200 pA VCM = VS/2 4
Common-Mode Rejection Ratio CMRR 95 105 dB (V−) < VCM < (V+) – 1.8V 4
Open-Loop Voltage Gain AOL 110 130 dB 0.12V < VO < (V+) − 0.7V, VS = 5V, VCM = VS/2 4
Open-Loop Voltage Gain over temperature AOL 110 130 dB 0.12V < VO < (V+) − 0.6V, VS = 5V, VCM = VS/2, TA = −40°C to +85°C 4
Open-Loop Voltage Gain with RP pulldown AOL 106 120 dB 0V < VO< (V+) − 0.7V, VS = 5V, VCM = 0V, RP = 2kΩ to −5V 4
Open-Loop Voltage Gain with RP pulldown over temperature AOL 106 120 dB 0V < VO < (V+) − 0.6V, VS = 5V, VCM = 0V, RP = 2kΩ to −5V, TA = −40°C to +85°C 4
Voltage Output Swing from Positive Rail 400 600 mV RL = 2kΩ 4
Voltage Output Swing from Negative Rail 80 120 mV RL = 2kΩ 4
Voltage Output Swing from Positive Rail with RP 400 600 mV RP = 2kΩ to −5V 4
Voltage Output Swing from Negative Rail with RP -20 0 mV RP = 2kΩ to −5V 4
Quiescent Current (per amplifier) IQ 7.5 9.5 mA IO = 0A 4
Quiescent Current over temperature IQ 10 mA Over temperature 4
Specified and Operating Range -40 125 °C 4
Storage Range -65 150 °C 4
Supply Voltage 7 V 2
Signal Input Terminals Voltage -0.5 V Printed as −0.5V to (V+) + 0.5V; upper limit is not a numeric value 2
Input Current -10 10 mA 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature (soldering) 300 °C soldering, 10s 2
ESD Rating (Human Body Model) 2000 V Human Body Model 2
Thermal Resistance, junction to ambient JA 150 °C/W MSOP-8 4

CAD (KiCad official)

  • Symbol: OPA2380AIDGKT
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: opa2380aidgkt-etched.step / opa2380aidgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2380aidgkt.step / opa2380aidgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 c95bbdd51944c1af, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF