Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2380AIDGKT
Texas Instruments · Precision Op Amps · VSSOP-8
OPA2380AIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Amplifier A output, with short-circuit current of 150mA typical and one amplifier per package shorted to ground continuously. |
| 2 | -In A | input | Amplifier A inverting input (summing junction in transimpedance use), diode clamped to the supply rails and limited to ±10mA if signals swing more than 0.5V beyond the rails. |
| 3 | +In A | input | Amplifier A non-inverting input, with common-mode range from V− to (V+) − 1.8V and diode clamped to the supply rails (current limit 10mA). |
| 4 | V- | power_in | Negative supply (or ground) for the op amps, with total supply range of 2.7V to 5.5V specified. |
| 5 | +In B | input | Amplifier B non-inverting input, with common-mode range from V− to (V+) − 1.8V and diode clamped to the supply rails (current limit 10mA). |
| 6 | -In B | input | Amplifier B inverting input (summing junction in transimpedance use), diode clamped to the supply rails and limited to ±10mA if signals swing more than 0.5V beyond the rails. |
| 7 | Out B | output | Amplifier B output, with short-circuit current of 150mA typical and one amplifier per package shorted to ground continuously. |
| 8 | V+ | power_in | Positive supply, specified from 2.7V to 5.5V with absolute maximum supply voltage of 7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Specified Voltage Range | VS | 2.7 | 5.5 | V | 4 | ||
| Input Offset Voltage | VOS | 4 | 25 | µV | VS = +5V, VCM = 0V | 4 | |
| Offset Voltage Drift | dVOS/dT | 0.03 | 0.1 | µV/°C | 4 | ||
| Power Supply Rejection Ratio | PSRR | 2.4 | 10 | µV/V | VS = +2.7V to +5.5V, VCM = 0V | 4 | |
| Power Supply Rejection Ratio over temperature | 10 | µV/V | Over Temperature; VS = +2.7V to +5.5V, VCM = 0V | 4 | |||
| Input Bias Current, Inverting Input | IB | -50 | 3 | 50 | pA | VCM = VS/2 | 4 |
| Input Bias Current, Noninverting Input | IB | -200 | 3 | 200 | pA | VCM = VS/2 | 4 |
| Common-Mode Rejection Ratio | CMRR | 95 | 105 | dB | (V−) < VCM < (V+) – 1.8V | 4 | |
| Open-Loop Voltage Gain | AOL | 110 | 130 | dB | 0.12V < VO < (V+) − 0.7V, VS = 5V, VCM = VS/2 | 4 | |
| Open-Loop Voltage Gain over temperature | AOL | 110 | 130 | dB | 0.12V < VO < (V+) − 0.6V, VS = 5V, VCM = VS/2, TA = −40°C to +85°C | 4 | |
| Open-Loop Voltage Gain with RP pulldown | AOL | 106 | 120 | dB | 0V < VO< (V+) − 0.7V, VS = 5V, VCM = 0V, RP = 2kΩ to −5V | 4 | |
| Open-Loop Voltage Gain with RP pulldown over temperature | AOL | 106 | 120 | dB | 0V < VO < (V+) − 0.6V, VS = 5V, VCM = 0V, RP = 2kΩ to −5V, TA = −40°C to +85°C | 4 | |
| Voltage Output Swing from Positive Rail | 400 | 600 | mV | RL = 2kΩ | 4 | ||
| Voltage Output Swing from Negative Rail | 80 | 120 | mV | RL = 2kΩ | 4 | ||
| Voltage Output Swing from Positive Rail with RP | 400 | 600 | mV | RP = 2kΩ to −5V | 4 | ||
| Voltage Output Swing from Negative Rail with RP | -20 | 0 | mV | RP = 2kΩ to −5V | 4 | ||
| Quiescent Current (per amplifier) | IQ | 7.5 | 9.5 | mA | IO = 0A | 4 | |
| Quiescent Current over temperature | IQ | 10 | mA | Over temperature | 4 | ||
| Specified and Operating Range | -40 | 125 | °C | 4 | |||
| Storage Range | -65 | 150 | °C | 4 | |||
| Supply Voltage | 7 | V | 2 | ||||
| Signal Input Terminals Voltage | -0.5 | V | Printed as −0.5V to (V+) + 0.5V; upper limit is not a numeric value | 2 | |||
| Input Current | -10 | 10 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| ESD Rating (Human Body Model) | 2000 | V | Human Body Model | 2 | |||
| Thermal Resistance, junction to ambient | JA | 150 | °C/W | MSOP-8 | 4 |
CAD (KiCad official)
- Symbol:
OPA2380AIDGKT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa2380aidgkt-etched.step/opa2380aidgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2380aidgkt.step/opa2380aidgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
c95bbdd51944c1af, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).