Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3497EDDB#TRMPBF

Analog Devices · LED Drivers · DFN-10-EP(2x3)

LT3497EDDB#TRMPBF from Analog Devices, in a DFN-10-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LED1 input Anode connection of the first LED in string 1 and high-side sense input; LED current is programmed as 200mV/RSENSE1.
2 CTRL1 input Dimming and shutdown pin for converter 1; below 50mV disables the converter, LED current ramps to full at 1.5V, and the pin must not be left floating.
3 GND power_in Ground pin, to be connected to the PCB system ground plane.
4 CTRL2 input Dimming and shutdown pin for converter 2; below 50mV disables the converter, LED current ramps to full at 1.5V, and the pin must not be left floating.
5 LED2 input Anode connection of the first LED in string 2 and high-side sense input; LED current is programmed as 200mV/RSENSE2.
6 CAP2 power_out Output of converter 2, connected to the cathode of internal Schottky diode 2; output capacitor and RSENSE2 connect to this pin, and open-LED clamp is 32V typ.
7 SW2 output Switch pin for converter 2; minimize trace area to reduce EMI and connect the inductor here, with SW voltage rated 35V max.
8 VIN power_in Input supply pin, VIN range 2.5V to 10V, must be locally bypassed.
9 SW1 output Switch pin for converter 1; minimize trace area to reduce EMI and connect the inductor here, with SW voltage rated 35V max.
10 CAP1 power_out Output of converter 1, connected to the cathode of internal Schottky diode 1; output capacitor and RSENSE1 connect to this pin, and open-LED clamp is 32V typ.
11 GND power_in Exposed pad is ground and must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-10-EP(2x3)
Category Nixie Tube Driver/LED Driver
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Operating Voltage 2.5 V 2
LED Current Sense Voltage (VCAP1, VLED1) 190 200 210 mV VCAP1 = 16V, full operating temperature range 2
LED Current Sense Voltage (VCAP2, VLED2) 190 200 210 mV VCAP2 = 16V, full operating temperature range 2
Offset Voltage (VOS) Between (VCAP1, VLED1), (VCAP2, VLED2) Voltages VOS 0 2 8 mV VOS = /(VCAP1, VLED1), (VCAP2, VLED2)/ 2
CAP1, LED1 Pin Bias Current 20 40 µA VCAP1 = 16V, VLED1 = 16V 2
CAP2, LED2 Pin Bias Current 20 40 µA VCAP2 = 16V, VLED2 = 16V 2
VCAP1, VLED1 Common Mode Minimum Voltage 2.5 V 2
VCAP2, VLED2 Common Mode Minimum Voltage 2.5 V 2
Supply Current 6 8.5 mA VCAP1 = VCAP2 = 16V, VLED1 = VLED2 = 15V, VCTRL1 = VCTRL2 = 3V 2
Supply Current (shutdown) 12 18 µA VCTRL1 = VCTRL2 = 0V 2
Switching Frequency 1.8 2.3 2.8 MHz 2
Maximum Duty Cycle 88 92 % 2
Converter 1 Switch Current Limit 300 400 mA SW1, full operating temperature range 2
Converter 2 Switch Current Limit 300 400 mA SW2, full operating temperature range 2
Converter 1 VCESAT VCESAT 200 mV ISW1 = 200mA 2
Converter 2 VCESAT VCESAT 200 mV ISW2 = 200mA 2
Switch 1 Leakage Current 0.1 5 µA VSW1 = 16V 2
Switch 2 Leakage Current 0.1 5 µA VSW2 = 16V 2
VCTRL1 Voltage for Full LED Current 1.5 V VCAP1 = 16V, full operating temperature range 3
VCTRL2 Voltage for Full LED Current 1.5 V VCAP2 = 16V, full operating temperature range 3
VCTRL1 or VCTRL2 Voltage to Turn On the IC 100 mV full operating temperature range 3
VCTRL1 and VCTRL2 Voltages to Shut Down the IC 50 mV 3
CTRL1, CTRL2 Pin Bias Current 100 nA 3
CAP1 Pin Overvoltage Protection 30 32 34 V full operating temperature range 3
CAP2 Pin Overvoltage Protection 30 32 34 V full operating temperature range 3
Schottky 1 Forward Drop 0.8 V ISCHOTTKY1 = 100mA 3
Schottky 2 Forward Drop 0.8 V ISCHOTTKY2 = 100mA 3
Schottky 1 Reverse Leakage Current 4 µA VR1 = 25V 3
Schottky 2 Reverse Leakage Current 4 µA VR2 = 25V 3
CTRL pin internal impedance 10 MΩ 11
Input Voltage (VIN) VIN 10 V 2
CTRL1, CTRL2 Voltages 10 V 2
Operating Temperature Range -40 85 °C 2
Maximum Junction Temperature TJMAX 125 °C 2
Storage Temperature Range -65 125 °C 2
Thermal Resistance Junction-to-Ambient θJA 76 °C/W 2
Thermal Resistance Junction-to-Case θJC 13.5 °C/W 2

CAD (KiCad official)

  • Symbol: LT3497EDDB#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm
  • 3D model: DFN-10-EP(2x3) (KiCad packages3D, STEP)
  • 3D model files: lt3497eddb-trmpbf-etched.step / lt3497eddb-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3497eddb-trmpbf.step / lt3497eddb-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 954a72bfcd811cbc, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF