Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LT3497EDDB#TRMPBF
Analog Devices · LED Drivers · DFN-10-EP(2x3)
LT3497EDDB#TRMPBF from Analog Devices, in a DFN-10-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LED1 | input | Anode connection of the first LED in string 1 and high-side sense input; LED current is programmed as 200mV/RSENSE1. |
| 2 | CTRL1 | input | Dimming and shutdown pin for converter 1; below 50mV disables the converter, LED current ramps to full at 1.5V, and the pin must not be left floating. |
| 3 | GND | power_in | Ground pin, to be connected to the PCB system ground plane. |
| 4 | CTRL2 | input | Dimming and shutdown pin for converter 2; below 50mV disables the converter, LED current ramps to full at 1.5V, and the pin must not be left floating. |
| 5 | LED2 | input | Anode connection of the first LED in string 2 and high-side sense input; LED current is programmed as 200mV/RSENSE2. |
| 6 | CAP2 | power_out | Output of converter 2, connected to the cathode of internal Schottky diode 2; output capacitor and RSENSE2 connect to this pin, and open-LED clamp is 32V typ. |
| 7 | SW2 | output | Switch pin for converter 2; minimize trace area to reduce EMI and connect the inductor here, with SW voltage rated 35V max. |
| 8 | VIN | power_in | Input supply pin, VIN range 2.5V to 10V, must be locally bypassed. |
| 9 | SW1 | output | Switch pin for converter 1; minimize trace area to reduce EMI and connect the inductor here, with SW voltage rated 35V max. |
| 10 | CAP1 | power_out | Output of converter 1, connected to the cathode of internal Schottky diode 1; output capacitor and RSENSE1 connect to this pin, and open-LED clamp is 32V typ. |
| 11 | GND | power_in | Exposed pad is ground and must be soldered to the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-10-EP(2x3) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Operating Voltage | 2.5 | V | 2 | ||||
| LED Current Sense Voltage (VCAP1, VLED1) | 190 | 200 | 210 | mV | VCAP1 = 16V, full operating temperature range | 2 | |
| LED Current Sense Voltage (VCAP2, VLED2) | 190 | 200 | 210 | mV | VCAP2 = 16V, full operating temperature range | 2 | |
| Offset Voltage (VOS) Between (VCAP1, VLED1), (VCAP2, VLED2) Voltages | VOS | 0 | 2 | 8 | mV | VOS = /(VCAP1, VLED1), (VCAP2, VLED2)/ | 2 |
| CAP1, LED1 Pin Bias Current | 20 | 40 | µA | VCAP1 = 16V, VLED1 = 16V | 2 | ||
| CAP2, LED2 Pin Bias Current | 20 | 40 | µA | VCAP2 = 16V, VLED2 = 16V | 2 | ||
| VCAP1, VLED1 Common Mode Minimum Voltage | 2.5 | V | 2 | ||||
| VCAP2, VLED2 Common Mode Minimum Voltage | 2.5 | V | 2 | ||||
| Supply Current | 6 | 8.5 | mA | VCAP1 = VCAP2 = 16V, VLED1 = VLED2 = 15V, VCTRL1 = VCTRL2 = 3V | 2 | ||
| Supply Current (shutdown) | 12 | 18 | µA | VCTRL1 = VCTRL2 = 0V | 2 | ||
| Switching Frequency | 1.8 | 2.3 | 2.8 | MHz | 2 | ||
| Maximum Duty Cycle | 88 | 92 | % | 2 | |||
| Converter 1 Switch Current Limit | 300 | 400 | mA | SW1, full operating temperature range | 2 | ||
| Converter 2 Switch Current Limit | 300 | 400 | mA | SW2, full operating temperature range | 2 | ||
| Converter 1 VCESAT | VCESAT | 200 | mV | ISW1 = 200mA | 2 | ||
| Converter 2 VCESAT | VCESAT | 200 | mV | ISW2 = 200mA | 2 | ||
| Switch 1 Leakage Current | 0.1 | 5 | µA | VSW1 = 16V | 2 | ||
| Switch 2 Leakage Current | 0.1 | 5 | µA | VSW2 = 16V | 2 | ||
| VCTRL1 Voltage for Full LED Current | 1.5 | V | VCAP1 = 16V, full operating temperature range | 3 | |||
| VCTRL2 Voltage for Full LED Current | 1.5 | V | VCAP2 = 16V, full operating temperature range | 3 | |||
| VCTRL1 or VCTRL2 Voltage to Turn On the IC | 100 | mV | full operating temperature range | 3 | |||
| VCTRL1 and VCTRL2 Voltages to Shut Down the IC | 50 | mV | 3 | ||||
| CTRL1, CTRL2 Pin Bias Current | 100 | nA | 3 | ||||
| CAP1 Pin Overvoltage Protection | 30 | 32 | 34 | V | full operating temperature range | 3 | |
| CAP2 Pin Overvoltage Protection | 30 | 32 | 34 | V | full operating temperature range | 3 | |
| Schottky 1 Forward Drop | 0.8 | V | ISCHOTTKY1 = 100mA | 3 | |||
| Schottky 2 Forward Drop | 0.8 | V | ISCHOTTKY2 = 100mA | 3 | |||
| Schottky 1 Reverse Leakage Current | 4 | µA | VR1 = 25V | 3 | |||
| Schottky 2 Reverse Leakage Current | 4 | µA | VR2 = 25V | 3 | |||
| CTRL pin internal impedance | 10 | MΩ | 11 | ||||
| Input Voltage (VIN) | VIN | 10 | V | 2 | |||
| CTRL1, CTRL2 Voltages | 10 | V | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 76 | °C/W | 2 | |||
| Thermal Resistance Junction-to-Case | θJC | 13.5 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT3497EDDB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm - 3D model: DFN-10-EP(2x3) (KiCad packages3D, STEP)
- 3D model files:
lt3497eddb-trmpbf-etched.step/lt3497eddb-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3497eddb-trmpbf.step/lt3497eddb-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
954a72bfcd811cbc, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).