3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT3092MPST#PBF
Analog Devices · Current Source/Constant Current Source · SOT-223-4
LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SET | input | Set pin is the error amplifier's noninverting input and sources a fixed 10µA reference current, with RSET and ROUT setting IOUT from 0.5mA to the 200mA maximum rated level. |
| 2 | OUT | power_out | Power output of the device; the minimum current source value is 0.5mA, below which the LT3092 will not regulate. The tab is internally tied to OUT and must be soldered to OUT on the PCB. |
| 3 | IN | power_in | Input supplies power to the internal circuitry and the output load current, and must be 1.2V to 1.4V above the OUT pin depending on output load current (see the dropout voltage specifications). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-223-4 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current | ISET | 9.9 | 10 | 10.1 | µA | VIN = 2V, ILOAD = 1mA | 4 |
| SET Pin Current (full range) | ISET | 9.8 | 10 | 10.2 | µA | 2V ≤ VIN ≤ 40V, 1mA ≤ ILOAD ≤ 200mA; full operating temperature range | 4 |
| Offset Voltage (VOUT, VSET) | VOS | -2 | 2 | mV | VIN = 2V, ILOAD = 1mA | 4 | |
| Offset Voltage (VOUT, VSET) (full range) | VOS | -4 | 4 | mV | VIN = 2V, ILOAD = 1mA; full operating temperature range | 4 | |
| Current Regulation (offset voltage) | ΔVOS | -0.5 | -2 | mV | ΔILOAD = 1mA to 200mA; full operating temperature range | 4 | |
| Line Regulation (reference current) | ΔISET | 0.03 | 0.2 | nA/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 | |
| Line Regulation (offset voltage) | ΔVOS | 0.003 | 0.01 | mV/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 | |
| Minimum Load Current | 300 | 500 | µA | 2V ≤ VIN ≤ 40V; full operating temperature range | 4 | ||
| Dropout Voltage (VIN, VOUT) | 1.22 | 1.45 | V | ILOAD = 10mA; full operating temperature range | 4 | ||
| Dropout Voltage (VIN, VOUT) | 1.3 | 1.65 | V | ILOAD = 200mA; full operating temperature range | 4 | ||
| Current Limit | 200 | 300 | mA | VIN = 5V, VSET = 0V, VOUT = -0.1V; full operating temperature range | 4 | ||
| IN Pin Voltage Relative to SET, OUT | -40 | 40 | V | Relative to SET and OUT pins | 2 | ||
| SET Pin Current | -15 | 15 | mA | Note 6 | 2 | ||
| SET Pin Voltage (relative to OUT) | -10 | 10 | V | Relative to OUT, Note 6 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Junction Temperature Range | TJ | -55 | 125 | °C | MP grade | 2 | |
| Input Voltage Range (VIN, VOUT) | VIN | 1.2 | 40 | V | Wide input voltage range as stated in Features | 1 | |
| Output Current Range | IOUT | 0.5 | 200 | mA | Set by RSET and ROUT; maximum rated level 200mA | 8 | |
| Junction-to-Ambient Thermal Resistance | θJA | 24 | °C/W | ST (3-lead SOT-223) package | 2 | ||
| Junction-to-Case Thermal Resistance | θJC | 15 | °C/W | ST (3-lead SOT-223) package | 2 | ||
| Junction-to-Ambient Thermal Resistance (2500mm2 copper) | θJA | 20 | °C/W | ST package; topside 2500mm2, backside 2500mm2, board area 2500mm2 | 14 | ||
| Junction-to-Ambient Thermal Resistance (100mm2 topside copper) | θJA | 29 | °C/W | ST package; topside 100mm2, backside 2500mm2, board area 2500mm2 | 15 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | the OUT pins (Pins 1, 2/Pin 2) at the PCB. The amount of copper area and planes connected to OUT determine | 8 |
CAD (KiCad official)
- Symbol:
LT3092MPST#PBF - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
lt3092mpst-pbf-etched.step/lt3092mpst-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3092mpst-pbf.step/lt3092mpst-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b59cebad3b0bef77, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).