main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3092mpst-pbf: viewers · Ray
lt3092mpst-pbf-etched.glb Publish 0.1.0 · Ray
lt3092mpst-pbf-etched.step lt3092mpst-pbf: rebuilt as a full factory component page (was a placeholder) · Ray
lt3092mpst-pbf-hero.glb Publish 0.2.0 · Ray
lt3092mpst-pbf-hero.overlay.json Publish 0.2.0 · Ray
lt3092mpst-pbf.glb Publish 0.1.0 · Ray
lt3092mpst-pbf.kicad_mod Publish 0.2.0 · Ray
lt3092mpst-pbf.kicad_sym Publish 0.2.0 · Ray
lt3092mpst-pbf.lbr Publish 0.2.0 · Ray
lt3092mpst-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md Publish 0.2.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 4 pins · Ray

LT3092MPST#PBF

Analog Devices · Current Source/Constant Current Source · SOT-223-4

LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SET input Set pin is the error amplifier's noninverting input and sources a fixed 10µA reference current, with RSET and ROUT setting IOUT from 0.5mA to the 200mA maximum rated level.
2 OUT power_out Power output of the device; the minimum current source value is 0.5mA, below which the LT3092 will not regulate. The tab is internally tied to OUT and must be soldered to OUT on the PCB.
3 IN power_in Input supplies power to the internal circuitry and the output load current, and must be 1.2V to 1.4V above the OUT pin depending on output load current (see the dropout voltage specifications).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-223-4
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SET Pin Current ISET 9.9 10 10.1 µA VIN = 2V, ILOAD = 1mA 4
SET Pin Current (full range) ISET 9.8 10 10.2 µA 2V ≤ VIN ≤ 40V, 1mA ≤ ILOAD ≤ 200mA; full operating temperature range 4
Offset Voltage (VOUT, VSET) VOS -2 2 mV VIN = 2V, ILOAD = 1mA 4
Offset Voltage (VOUT, VSET) (full range) VOS -4 4 mV VIN = 2V, ILOAD = 1mA; full operating temperature range 4
Current Regulation (offset voltage) ΔVOS -0.5 -2 mV ΔILOAD = 1mA to 200mA; full operating temperature range 4
Line Regulation (reference current) ΔISET 0.03 0.2 nA/V ΔVIN = 2V to 40V, ILOAD = 1mA 4
Line Regulation (offset voltage) ΔVOS 0.003 0.01 mV/V ΔVIN = 2V to 40V, ILOAD = 1mA 4
Minimum Load Current 300 500 µA 2V ≤ VIN ≤ 40V; full operating temperature range 4
Dropout Voltage (VIN, VOUT) 1.22 1.45 V ILOAD = 10mA; full operating temperature range 4
Dropout Voltage (VIN, VOUT) 1.3 1.65 V ILOAD = 200mA; full operating temperature range 4
Current Limit 200 300 mA VIN = 5V, VSET = 0V, VOUT = -0.1V; full operating temperature range 4
IN Pin Voltage Relative to SET, OUT -40 40 V Relative to SET and OUT pins 2
SET Pin Current -15 15 mA Note 6 2
SET Pin Voltage (relative to OUT) -10 10 V Relative to OUT, Note 6 2
Storage Temperature Range -65 150 °C 2
Operating Junction Temperature Range TJ -55 125 °C MP grade 2
Input Voltage Range (VIN, VOUT) VIN 1.2 40 V Wide input voltage range as stated in Features 1
Output Current Range IOUT 0.5 200 mA Set by RSET and ROUT; maximum rated level 200mA 8
Junction-to-Ambient Thermal Resistance θJA 24 °C/W ST (3-lead SOT-223) package 2
Junction-to-Case Thermal Resistance θJC 15 °C/W ST (3-lead SOT-223) package 2
Junction-to-Ambient Thermal Resistance (2500mm2 copper) θJA 20 °C/W ST package; topside 2500mm2, backside 2500mm2, board area 2500mm2 14
Junction-to-Ambient Thermal Resistance (100mm2 topside copper) θJA 29 °C/W ST package; topside 100mm2, backside 2500mm2, board area 2500mm2 15

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper the OUT pins (Pins 1, 2/Pin 2) at the PCB. The amount of copper area and planes connected to OUT determine 8

CAD (KiCad official)

  • Symbol: LT3092MPST#PBF
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: lt3092mpst-pbf-etched.step / lt3092mpst-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3092mpst-pbf.step / lt3092mpst-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 b59cebad3b0bef77, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF