Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MLX81325LLQ-BMA-103-RE

Melexis · Microcontrollers (MCU/MPU/SOC) · QFN-32(5x5)

MLX81325LLQ-BMA-103-RE from Melexis, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 W passive Motor phase W, high-voltage power pin (abs max -0.3 V to VS+0.3 V).
2 HSV output High side pre-driver output for phase V, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V).
3 V power_in Motor phase V, high-voltage power pin (abs max -0.3 V to VS+0.3 V).
4 HSU output High side pre-driver output for phase U, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V).
5 U passive Motor phase U, high-voltage power pin (abs max -0.3 V to VS+0.3 V).
6 HST output High side pre-driver output for phase T, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V).
7 T passive Motor phase T, high-voltage power pin (abs max -0.3 V to VS+0.3 V).
8 LSW output Low side pre-driver output for phase W (abs max -0.3 V to VREF+0.3 V).
9 LSV output Low side pre-driver output for phase V (abs max -0.3 V to VREF+0.3 V).
10 LSU output Low side pre-driver output for phase U (abs max -0.3 V to VREF+0.3 V).
11 LST output Low side pre-driver output for phase T (abs max -0.3 V to VREF+0.3 V).
12 ILS input Positive input of the current sensor, low-voltage; input range -100 mV to 100 mV, abs max -0.5 V to VDDA+0.3 V.
13 GNDM power_in Power and digital ground.
14 GNDL power_in LIN ground.
15 LININ bidirectional LIN transceiver bus pin connected to master side; abs max -27 V to 45 V (t<500 ms), ESD HBM ±6 kV.
16 ILS2 input Option 1xx: negative input of the current sensor (differential shunt), abs max -0.5 V to VDDA+0.3 V.
17 IO7 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
18 IO6 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
19 IO5 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
20 IO4 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
21 IO3 bidirectional General purpose digital I/O, low/high-voltage ADC input (measured as V/16, up to 36 V) and wake-up pin; abs max -0.3 V to VS+0.3 V.
22 IO2 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
23 IO1 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
24 IO0 bidirectional General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA.
25 VDDA power_out Regulator output (~3.3 V, 3.15 to 3.45 V, 25 mA external capability) with external blocking capacitor of 47 nF to 220 nF.
26 GNDA power_in Ground pin for analog.
27 VDDD power_out Regulator output (~1.8 V, 1.77 to 1.93 V) for the digital part with external blocking capacitor of 47 nF to 220 nF; no external load.
28 VS power_in Battery supply for the analog part, 5.5 V to 28 V (36 V limited to 24 h); needs external reverse polarity protection and blocking capacitors.
29 CPDRV output Charge pump clock output, high-voltage pin; charge pump frequency 40 to 60 kHz.
30 VSM power_in Battery supply for the driver part, 5.5 V to 28 V (36 V limited to 24 h); needs external reverse polarity protection and blocking capacitors.
31 VBOOST power_out Charge pump voltage, typically VSM+8 V for VSM >= 10 V; abs max 45 V.
32 HSW output High side pre-driver output for phase W, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V).
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Melexis
Package QFN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Battery supply voltage VS VS -0.5 28 V 36V limited to 24h over life 7
Battery supply voltage VS transient VS -0.5 45 V t < 500 ms 7
Supply voltage VSM VSM 28 V min VDDA-0.3; 36V limited to 24h over life 7
Supply current VSM IVSM_max 125 mA maximum DC or RMS supply current VSM 7
Output voltage VDDA VDDA -0.3 3.6 V 7
Output voltage VDD1V8 VDD1V8 -0.3 1.95 V 7
LIN bus voltage VLIN -27 45 V T < 500ms 7
Maximum current in LININ or LINOUT ILIN_max -200 200 mA 7
Voltage on VBOOST VAN_VBOOST 45 V switching transients at 36V motor drive 7
Voltage on IO[3] VIO_HV -0.3 V max VS+0.3 7
Current on IO[7:0] IIN_DIG -10 10 mA 7
Latch-up free current at any pin ILATCH -100 100 mA according JEDEC JESD78, AEC-Q100-004 8
ESD HBM LIN pin ESDHBM_LIN -6 6 kV Human body model, acc. AEC-Q100-002 8
ESD HBM other pins ESDHBM -2 2 kV Human body model 8
ESD CDM ESDCDM -500 500 V Charge Device Model, acc. ANSI/ESDA/JEDEC JS-002 8
Storage temperature Tstg -55 150 °C 8
Junction temperature TJ -40 175 °C 8
Thermal resistance MLF32 Rth 32 K/W in free air; simulated, low conductance board (JEDEC) 8
Supply voltage range VS 5.5 28 V 36V limited to 24h over life 9
Supply voltage range low battery VS_lb 3.5 5.5 V reduced analogue characteristics 9
Ambient temperature TA -40 150 °C 9
Junction temperature for FLASH program and erase TJFLPR 0 85 °C 9
Junction temperature for NVRAM program and erase TJNVPR -40 165 °C 9
Normal working current Inom 10 30 mA all pins are inputs, trimmed PLL to 28 MHz; no external loads, Normal LIN communication 10
Holding mode current Ihold 7 mA All pins are inputs, no motor drive, Mlx16 in halt 10
Frequency of trimmed RC oscillator frc_1M -5 1 5 MHz RC oscillator is trimmed; tolerance in % 10
Frequency of PLL fpll -5 28 5 MHz System RC oscillator is trimmed; tolerance in % 10
Settling time of the PLL tsetpll 250 µs RC oscillator is trimmed, PLL is switched on 10
Frequency of 10kHz RC oscillator frc_10k 5 10 20 kHz Value of Frc_10k 10
Startup time after Power On tstartup_POR 20 ms C_3.3V=100nF; C_1.8V=100nF, time to 1st Flash instruction 11
3.3V supply voltage range VDDA 3.15 3.3 3.45 V with trimmed VBG 11
External output current capability VDDA Iddout_VDDA 25 mA 11
1.8V supply voltage range VDDD 1.77 1.85 1.93 V after trimming 11
Undervoltage reset on VDDA Vuvr_hl_VDDA 2.7 2.85 3 V 11
Undervoltage reset off VDDA Vuvr_lh_VDDA 2.85 3 3.15 V 11
Undervoltage reset on VDDD Vuvr_hl_VDDD 1.525 1.6 1.675 V 11
Undervoltage reset off VDDD Vuvr_lh_VDDD 1.6 1.675 1.75 V 11
ADC full scale range fsr3 2.45 2.5 2.55 V ADC_REF[1:0]=11 12
ADC full scale range fsr2 1.47 1.5 1.53 V ADC_REF[1:0]=10 12
ADC full scale range fsr1 0.735 0.75 0.765 V ADC_REF[1:0]=01 12
Differential nonlinearity DNL -1 1 LSB only characterized; no production test 12
Integral nonlinearity INL -3 3 LSB only characterized; no production test 12
ADC error LV channels ErrADC -1 1 % LV channels 12
ADC error HV channels ErrADC -3 3 % HV channels (with predivider) 12
Leakage current in IO[7:0] Ileakio[7:0] -5 5 µA 1/16 divider on IO3 disabled. 12
Over temperature shutdown on Tot_on 170 180 190 C tested by special test mode only 13
Temperature sensor accuracy Tacc -10 10 C Measurement error versus T-junction temperature after calibration 14
Current sensor input range V_CURR_IR -100 100 mV Allowed input range of shunt voltage 15
Current sensor gain Acs 9.5 10 10.5 15
Current sensor calibration error Vcs_err -20 20 mV measured at the output of the current sensor (ADC input) 15
Short circuit detection level Voc 260 300 330 mV 15
Charge pump output frequency CP_FREQ 40 50 60 kHz 15
FET Vds detection level Vds 1.5 2 2.5 V Vds over voltage level when FET is on 16
Centre point of receiver threshold VBUS_CNT 0.475 0.5 0.525 VS VBUS_CNT=(VBUSdom+VBUSrec)/2 17
Receiver propagation delay falling trx_pdf 6 µs CRxD =25pF falling edge 17
Receiver propagation delay rising trx_pdr 6 µs CRxD =25pF rising edge 17
Propagation delay receiver symmetry trx_sym -2 2 µs trx_pdf - trx_pdr 17

CAD (KiCad official)

  • Symbol: MLX81325LLQ-BMA-103-RE
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: mlx81325llq-bma-103-re-etched.step / mlx81325llq-bma-103-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx81325llq-bma-103-re.step / mlx81325llq-bma-103-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (23 pp, sha256 d24d8008041a5d01, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF