Generated by kicad-footprint-generator · KiCad file format 20260206
MLX81325LLQ-BMA-103-RE
Melexis · Microcontrollers (MCU/MPU/SOC) · QFN-32(5x5)
MLX81325LLQ-BMA-103-RE from Melexis, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | W | passive | Motor phase W, high-voltage power pin (abs max -0.3 V to VS+0.3 V). |
| 2 | HSV | output | High side pre-driver output for phase V, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V). |
| 3 | V | power_in | Motor phase V, high-voltage power pin (abs max -0.3 V to VS+0.3 V). |
| 4 | HSU | output | High side pre-driver output for phase U, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V). |
| 5 | U | passive | Motor phase U, high-voltage power pin (abs max -0.3 V to VS+0.3 V). |
| 6 | HST | output | High side pre-driver output for phase T, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V). |
| 7 | T | passive | Motor phase T, high-voltage power pin (abs max -0.3 V to VS+0.3 V). |
| 8 | LSW | output | Low side pre-driver output for phase W (abs max -0.3 V to VREF+0.3 V). |
| 9 | LSV | output | Low side pre-driver output for phase V (abs max -0.3 V to VREF+0.3 V). |
| 10 | LSU | output | Low side pre-driver output for phase U (abs max -0.3 V to VREF+0.3 V). |
| 11 | LST | output | Low side pre-driver output for phase T (abs max -0.3 V to VREF+0.3 V). |
| 12 | ILS | input | Positive input of the current sensor, low-voltage; input range -100 mV to 100 mV, abs max -0.5 V to VDDA+0.3 V. |
| 13 | GNDM | power_in | Power and digital ground. |
| 14 | GNDL | power_in | LIN ground. |
| 15 | LININ | bidirectional | LIN transceiver bus pin connected to master side; abs max -27 V to 45 V (t<500 ms), ESD HBM ±6 kV. |
| 16 | ILS2 | input | Option 1xx: negative input of the current sensor (differential shunt), abs max -0.5 V to VDDA+0.3 V. |
| 17 | IO7 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 18 | IO6 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 19 | IO5 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 20 | IO4 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 21 | IO3 | bidirectional | General purpose digital I/O, low/high-voltage ADC input (measured as V/16, up to 36 V) and wake-up pin; abs max -0.3 V to VS+0.3 V. |
| 22 | IO2 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 23 | IO1 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 24 | IO0 | bidirectional | General purpose digital I/O or analog input for ADC, low-voltage; -0.3 V to VDDA+0.3 V, ±10 mA. |
| 25 | VDDA | power_out | Regulator output (~3.3 V, 3.15 to 3.45 V, 25 mA external capability) with external blocking capacitor of 47 nF to 220 nF. |
| 26 | GNDA | power_in | Ground pin for analog. |
| 27 | VDDD | power_out | Regulator output (~1.8 V, 1.77 to 1.93 V) for the digital part with external blocking capacitor of 47 nF to 220 nF; no external load. |
| 28 | VS | power_in | Battery supply for the analog part, 5.5 V to 28 V (36 V limited to 24 h); needs external reverse polarity protection and blocking capacitors. |
| 29 | CPDRV | output | Charge pump clock output, high-voltage pin; charge pump frequency 40 to 60 kHz. |
| 30 | VSM | power_in | Battery supply for the driver part, 5.5 V to 28 V (36 V limited to 24 h); needs external reverse polarity protection and blocking capacitors. |
| 31 | VBOOST | power_out | Charge pump voltage, typically VSM+8 V for VSM >= 10 V; abs max 45 V. |
| 32 | HSW | output | High side pre-driver output for phase W, high-voltage pin (abs max -0.3 V to VBOOST+0.3 V). |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | QFN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Battery supply voltage VS | VS | -0.5 | 28 | V | 36V limited to 24h over life | 7 | |
| Battery supply voltage VS transient | VS | -0.5 | 45 | V | t < 500 ms | 7 | |
| Supply voltage VSM | VSM | 28 | V | min VDDA-0.3; 36V limited to 24h over life | 7 | ||
| Supply current VSM | IVSM_max | 125 | mA | maximum DC or RMS supply current VSM | 7 | ||
| Output voltage VDDA | VDDA | -0.3 | 3.6 | V | 7 | ||
| Output voltage VDD1V8 | VDD1V8 | -0.3 | 1.95 | V | 7 | ||
| LIN bus voltage | VLIN | -27 | 45 | V | T < 500ms | 7 | |
| Maximum current in LININ or LINOUT | ILIN_max | -200 | 200 | mA | 7 | ||
| Voltage on VBOOST | VAN_VBOOST | 45 | V | switching transients at 36V motor drive | 7 | ||
| Voltage on IO[3] | VIO_HV | -0.3 | V | max VS+0.3 | 7 | ||
| Current on IO[7:0] | IIN_DIG | -10 | 10 | mA | 7 | ||
| Latch-up free current at any pin | ILATCH | -100 | 100 | mA | according JEDEC JESD78, AEC-Q100-004 | 8 | |
| ESD HBM LIN pin | ESDHBM_LIN | -6 | 6 | kV | Human body model, acc. AEC-Q100-002 | 8 | |
| ESD HBM other pins | ESDHBM | -2 | 2 | kV | Human body model | 8 | |
| ESD CDM | ESDCDM | -500 | 500 | V | Charge Device Model, acc. ANSI/ESDA/JEDEC JS-002 | 8 | |
| Storage temperature | Tstg | -55 | 150 | °C | 8 | ||
| Junction temperature | TJ | -40 | 175 | °C | 8 | ||
| Thermal resistance MLF32 | Rth | 32 | K/W | in free air; simulated, low conductance board (JEDEC) | 8 | ||
| Supply voltage range | VS | 5.5 | 28 | V | 36V limited to 24h over life | 9 | |
| Supply voltage range low battery | VS_lb | 3.5 | 5.5 | V | reduced analogue characteristics | 9 | |
| Ambient temperature | TA | -40 | 150 | °C | 9 | ||
| Junction temperature for FLASH program and erase | TJFLPR | 0 | 85 | °C | 9 | ||
| Junction temperature for NVRAM program and erase | TJNVPR | -40 | 165 | °C | 9 | ||
| Normal working current | Inom | 10 | 30 | mA | all pins are inputs, trimmed PLL to 28 MHz; no external loads, Normal LIN communication | 10 | |
| Holding mode current | Ihold | 7 | mA | All pins are inputs, no motor drive, Mlx16 in halt | 10 | ||
| Frequency of trimmed RC oscillator | frc_1M | -5 | 1 | 5 | MHz | RC oscillator is trimmed; tolerance in % | 10 |
| Frequency of PLL | fpll | -5 | 28 | 5 | MHz | System RC oscillator is trimmed; tolerance in % | 10 |
| Settling time of the PLL | tsetpll | 250 | µs | RC oscillator is trimmed, PLL is switched on | 10 | ||
| Frequency of 10kHz RC oscillator | frc_10k | 5 | 10 | 20 | kHz | Value of Frc_10k | 10 |
| Startup time after Power On | tstartup_POR | 20 | ms | C_3.3V=100nF; C_1.8V=100nF, time to 1st Flash instruction | 11 | ||
| 3.3V supply voltage range | VDDA | 3.15 | 3.3 | 3.45 | V | with trimmed VBG | 11 |
| External output current capability VDDA | Iddout_VDDA | 25 | mA | 11 | |||
| 1.8V supply voltage range | VDDD | 1.77 | 1.85 | 1.93 | V | after trimming | 11 |
| Undervoltage reset on VDDA | Vuvr_hl_VDDA | 2.7 | 2.85 | 3 | V | 11 | |
| Undervoltage reset off VDDA | Vuvr_lh_VDDA | 2.85 | 3 | 3.15 | V | 11 | |
| Undervoltage reset on VDDD | Vuvr_hl_VDDD | 1.525 | 1.6 | 1.675 | V | 11 | |
| Undervoltage reset off VDDD | Vuvr_lh_VDDD | 1.6 | 1.675 | 1.75 | V | 11 | |
| ADC full scale range | fsr3 | 2.45 | 2.5 | 2.55 | V | ADC_REF[1:0]=11 | 12 |
| ADC full scale range | fsr2 | 1.47 | 1.5 | 1.53 | V | ADC_REF[1:0]=10 | 12 |
| ADC full scale range | fsr1 | 0.735 | 0.75 | 0.765 | V | ADC_REF[1:0]=01 | 12 |
| Differential nonlinearity | DNL | -1 | 1 | LSB | only characterized; no production test | 12 | |
| Integral nonlinearity | INL | -3 | 3 | LSB | only characterized; no production test | 12 | |
| ADC error LV channels | ErrADC | -1 | 1 | % | LV channels | 12 | |
| ADC error HV channels | ErrADC | -3 | 3 | % | HV channels (with predivider) | 12 | |
| Leakage current in IO[7:0] | Ileakio[7:0] | -5 | 5 | µA | 1/16 divider on IO3 disabled. | 12 | |
| Over temperature shutdown on | Tot_on | 170 | 180 | 190 | C | tested by special test mode only | 13 |
| Temperature sensor accuracy | Tacc | -10 | 10 | C | Measurement error versus T-junction temperature after calibration | 14 | |
| Current sensor input range | V_CURR_IR | -100 | 100 | mV | Allowed input range of shunt voltage | 15 | |
| Current sensor gain | Acs | 9.5 | 10 | 10.5 | 15 | ||
| Current sensor calibration error | Vcs_err | -20 | 20 | mV | measured at the output of the current sensor (ADC input) | 15 | |
| Short circuit detection level | Voc | 260 | 300 | 330 | mV | 15 | |
| Charge pump output frequency | CP_FREQ | 40 | 50 | 60 | kHz | 15 | |
| FET Vds detection level | Vds | 1.5 | 2 | 2.5 | V | Vds over voltage level when FET is on | 16 |
| Centre point of receiver threshold | VBUS_CNT | 0.475 | 0.5 | 0.525 | VS | VBUS_CNT=(VBUSdom+VBUSrec)/2 | 17 |
| Receiver propagation delay falling | trx_pdf | 6 | µs | CRxD =25pF falling edge | 17 | ||
| Receiver propagation delay rising | trx_pdr | 6 | µs | CRxD =25pF rising edge | 17 | ||
| Propagation delay receiver symmetry | trx_sym | -2 | 2 | µs | trx_pdf - trx_pdr | 17 |
CAD (KiCad official)
- Symbol:
MLX81325LLQ-BMA-103-RE - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
mlx81325llq-bma-103-re-etched.step/mlx81325llq-bma-103-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx81325llq-bma-103-re.step/mlx81325llq-bma-103-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (23 pp, sha256
d24d8008041a5d01, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).