Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

S-1170B33UC-OTSTFU

ABLIC · Linear Voltage Regulators (LDO) · SOT-89-5

S-1170B33UC-OTSTFU from ABLIC, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ON/OFF input ON/OFF pin that starts and stops the regulator, and it is neither pulled up nor pulled down internally, so it must not be left floating.
2 VSS power_in GND pin, the ground reference for the regulator.
3 NC unconnected No connection pin that is electrically open and can be connected to the VIN pin or the VSS pin.
4 VIN power_in Input voltage pin, with an input voltage range of 2.0 V to 6.5 V.
5 VOUT power_out Output voltage pin, which must not exceed VIN + 0.3 V to avoid reverse current through the parasitic diode into the VIN pin.

Key specifications

Parameter Value
Manufacturer ABLIC
Package SOT-89-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy lower bound (VOUT(E) vs VOUT(S)) VOUT(E) 0.99 × VOUT(S) VIN = VOUT(S)+1.0 V, IOUT = 100 mA; printed as 0.99 × VOUT(S) 8
Output voltage accuracy upper bound (VOUT(E) vs VOUT(S)) VOUT(E) 1.01 × VOUT(S) VIN = VOUT(S)+1.0 V, IOUT = 100 mA; printed as 1.01 × VOUT(S) 8
Output current IOUT 800 mA VIN >= VOUT(S)+1.0 V; minimum output current (footnote *5) 8
Dropout voltage Vdrop 0.12 0.18 V IOUT = 300 mA, 3.0 V <= VOUT(S) <= 5.5 V 8
Line regulation VOUT1 0.05 0.3 %/V VOUT(S)+0.5 V <= VIN <= 6.5 V, IOUT = 100 mA 8
Load regulation VOUT2 30 100 mV VIN = VOUT(S)+1.0 V, 1.0 mA <= IOUT <= 300 mA 8
Output voltage temperature coefficient VOUT/Ta 150 ppm/°C VIN = VOUT(S)+1.0 V, IOUT = 10 mA, -40°C <= Ta <= 85°C 8
Current consumption during operation ISS1 80 160 µA VIN = VOUT(S)+1.0 V, ON/OFF pin = ON, no load 8
Current consumption during power-off ISS2 0.1 1 µA VIN = VOUT(S)+1.0 V, ON/OFF pin = OFF, no load 8
Input voltage VIN 2 6.5 V 8
ON/OFF pin input voltage 'H' VSH 1.5 V VIN = VOUT(S)+1.0 V, RL = 1.0 k 8
ON/OFF pin input voltage 'L' VSL 0.3 V VIN = VOUT(S)+1.0 V, RL = 1.0 k 8
ON/OFF pin input current 'H' ISH -0.1 0.1 µA VIN = 6.5 V, VON/OFF = 6.5 V 8
ON/OFF pin input current 'L' ISL -0.1 0.1 µA VIN = 6.5 V, VON/OFF = 0 V 8
Input voltage (absolute maximum) VIN -0.3 7 V Referenced to VSS (VSS-0.3 V to VSS+7 V) 7
ON/OFF pin voltage (absolute maximum) VON/OFF -0.3 V Lower limit VSS-0.3 V; upper limit VIN+0.3 V 7
Output voltage (absolute maximum) VOUT -0.3 V Lower limit VSS-0.3 V; upper limit VIN+0.3 V 7
Power dissipation PD 1000 mW SOT-89-5, mounted on printed circuit board (40 mm x 40 mm x t1.6 mm) 7
Operation ambient temperature Topr -40 85 °C 7
Storage temperature Tstg -40 125 °C 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin  Lead-free, Sn 100%, halogen-free*2 *1. Attention should be paid to the power dissipation of the package when the output current is large. 1

CAD (KiCad official)

  • Symbol: S-1170B33UC-OTSTFU
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: s-1170b33uc-otstfu-etched.step / s-1170b33uc-otstfu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s-1170b33uc-otstfu.step / s-1170b33uc-otstfu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ABLIC datasheet (30 pp, sha256 9428c4e61c93325d, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF