Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
S-1170B33UC-OTSTFU
ABLIC · Linear Voltage Regulators (LDO) · SOT-89-5
S-1170B33UC-OTSTFU from ABLIC, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ON/OFF | input | ON/OFF pin that starts and stops the regulator, and it is neither pulled up nor pulled down internally, so it must not be left floating. |
| 2 | VSS | power_in | GND pin, the ground reference for the regulator. |
| 3 | NC | unconnected | No connection pin that is electrically open and can be connected to the VIN pin or the VSS pin. |
| 4 | VIN | power_in | Input voltage pin, with an input voltage range of 2.0 V to 6.5 V. |
| 5 | VOUT | power_out | Output voltage pin, which must not exceed VIN + 0.3 V to avoid reverse current through the parasitic diode into the VIN pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOT-89-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy lower bound (VOUT(E) vs VOUT(S)) | VOUT(E) | 0.99 | × VOUT(S) | VIN = VOUT(S)+1.0 V, IOUT = 100 mA; printed as 0.99 × VOUT(S) | 8 | ||
| Output voltage accuracy upper bound (VOUT(E) vs VOUT(S)) | VOUT(E) | 1.01 | × VOUT(S) | VIN = VOUT(S)+1.0 V, IOUT = 100 mA; printed as 1.01 × VOUT(S) | 8 | ||
| Output current | IOUT | 800 | mA | VIN >= VOUT(S)+1.0 V; minimum output current (footnote *5) | 8 | ||
| Dropout voltage | Vdrop | 0.12 | 0.18 | V | IOUT = 300 mA, 3.0 V <= VOUT(S) <= 5.5 V | 8 | |
| Line regulation | VOUT1 | 0.05 | 0.3 | %/V | VOUT(S)+0.5 V <= VIN <= 6.5 V, IOUT = 100 mA | 8 | |
| Load regulation | VOUT2 | 30 | 100 | mV | VIN = VOUT(S)+1.0 V, 1.0 mA <= IOUT <= 300 mA | 8 | |
| Output voltage temperature coefficient | VOUT/Ta | 150 | ppm/°C | VIN = VOUT(S)+1.0 V, IOUT = 10 mA, -40°C <= Ta <= 85°C | 8 | ||
| Current consumption during operation | ISS1 | 80 | 160 | µA | VIN = VOUT(S)+1.0 V, ON/OFF pin = ON, no load | 8 | |
| Current consumption during power-off | ISS2 | 0.1 | 1 | µA | VIN = VOUT(S)+1.0 V, ON/OFF pin = OFF, no load | 8 | |
| Input voltage | VIN | 2 | 6.5 | V | 8 | ||
| ON/OFF pin input voltage 'H' | VSH | 1.5 | V | VIN = VOUT(S)+1.0 V, RL = 1.0 k | 8 | ||
| ON/OFF pin input voltage 'L' | VSL | 0.3 | V | VIN = VOUT(S)+1.0 V, RL = 1.0 k | 8 | ||
| ON/OFF pin input current 'H' | ISH | -0.1 | 0.1 | µA | VIN = 6.5 V, VON/OFF = 6.5 V | 8 | |
| ON/OFF pin input current 'L' | ISL | -0.1 | 0.1 | µA | VIN = 6.5 V, VON/OFF = 0 V | 8 | |
| Input voltage (absolute maximum) | VIN | -0.3 | 7 | V | Referenced to VSS (VSS-0.3 V to VSS+7 V) | 7 | |
| ON/OFF pin voltage (absolute maximum) | VON/OFF | -0.3 | V | Lower limit VSS-0.3 V; upper limit VIN+0.3 V | 7 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | V | Lower limit VSS-0.3 V; upper limit VIN+0.3 V | 7 | ||
| Power dissipation | PD | 1000 | mW | SOT-89-5, mounted on printed circuit board (40 mm x 40 mm x t1.6 mm) | 7 | ||
| Operation ambient temperature | Topr | -40 | 85 | °C | 7 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Lead-free, Sn 100%, halogen-free*2 *1. Attention should be paid to the power dissipation of the package when the output current is large. | 1 |
CAD (KiCad official)
- Symbol:
S-1170B33UC-OTSTFU - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
s-1170b33uc-otstfu-etched.step/s-1170b33uc-otstfu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-1170b33uc-otstfu.step/s-1170b33uc-otstfu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ABLIC datasheet (30 pp, sha256
9428c4e61c93325d, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).