Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV3231

Texas Instruments · IC · SOT-SC70-5 (DCK)

TLV3231 from Texas Instruments, in a SOT-SC70-5 (DCK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT output Comparator push-pull output, referenced to the V- and V+ supply pins.
2 V- power_in Negative supply voltage; the recommended supply range is VS = (V+) - (V-) = 2.7 V to 5.5 V, with a 6 V absolute maximum.
3 IN+ input Non-inverting (+) comparator input; the recommended input voltage range is (V-) - 0.1 V to (V+) + 0.1 V.
4 IN- input Inverting (-) comparator input; the recommended input voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input currents above 10 mA must be avoided when signals swing more than 0.5 V beyond the rails.
5 V+ power_in Positive supply voltage; the recommended supply range is VS = (V+) - (V-) = 2.7 V to 5.5 V, with a 6 V absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-SC70-5 (DCK)
Category
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO -4 0.5 4 mV VS = 5V, VCM = VS / 2 6
Input offset voltage over temperature VIO -4.5 4.5 mV VS = 5V, VCM = VS / 2, TA = -40 to 125℃ 6
Hysteresis VHYS 0.5 1.55 3 mV VS = 5V, VCM = VS / 2 6
Input bias current IB 0.01 10 nA VS = 5V, VCM = VS / 2, TA = -40 to 125℃ 6
Supply current per channel IQ 200 250 uA VS = 2.7V and 5V, no load, Output Low 6
Supply current per channel over temperature IQ 350 uA VS = 2.7V and 5V, no load, Output Low, TA = -40 to 125℃ 6
Propagation delay, high to low (single and dual) tPHL 15 25 ns Midpoint of input to midpoint of output, VOD = 50mV; VS = 5V, VCM = VS / 2, CL = 15pF 7
Propagation delay, low to high (single and dual) tPLH 15 25 ns Midpoint of input to midpoint of output, VOD = 50mV; VS = 5V, VCM = VS / 2, CL = 15pF 7
Supply voltage VS = (V+) - (V-) 2.7 5.5 V Over operating free-air temperature range 4
Ambient temperature TA -40 125 °C Over operating free-air temperature range 4
Supply voltage VS = (V+) - (V-) 6 V Over operating free-air temperature range 4
Differential input voltage VID -6 6 V Over operating free-air temperature range 4
Current into input pins IN+, IN- -10 10 mA Over operating free-air temperature range 4
Output short-circuit current -100 100 mA Over operating free-air temperature range 4
Junction temperature TJ 150 °C Over operating free-air temperature range 4
Storage temperature Tstg -65 150 °C Over operating free-air temperature range 4
Junction-to-ambient thermal resistance (DCK, SC70) RθJA 220 °C/W DCK (SC70) 5-pin package 5
Junction-to-case (top) thermal resistance (DCK, SC70) RθJC(top) 135 °C/W DCK (SC70) 5-pin package 5
Junction-to-board thermal resistance (DCK, SC70) RθJB 65 °C/W DCK (SC70) 5-pin package 5
Junction-to-top characterization parameter (DCK, SC70) ΨJT 34 °C/W DCK (SC70) 5-pin package 5
Junction-to-board characterization parameter (DCK, SC70) ΨJB 65 °C/W DCK (SC70) 5-pin package 5

CAD (Adom-generated)

  • Symbol: TLV3231
  • Footprint: Adom_Gen:Texas_Instruments_TLV3231
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv3231-etched.step / tlv3231-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv3231.step / tlv3231.glb are the bare package body.

Provenance

No distributor stocks TLV3231 yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 a07d93a06d924075, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF