component
TLV3231
Public Made by Adomby adom
Texas Instruments , SOT-SC70-5 (DCK). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by adom_assets · KiCad file format 20240108
TLV3231
Texas Instruments · IC · SOT-SC70-5 (DCK)
TLV3231 from Texas Instruments, in a SOT-SC70-5 (DCK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator push-pull output, referenced to the V- and V+ supply pins. |
| 2 | V- | power_in | Negative supply voltage; the recommended supply range is VS = (V+) - (V-) = 2.7 V to 5.5 V, with a 6 V absolute maximum. |
| 3 | IN+ | input | Non-inverting (+) comparator input; the recommended input voltage range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 4 | IN- | input | Inverting (-) comparator input; the recommended input voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input currents above 10 mA must be avoided when signals swing more than 0.5 V beyond the rails. |
| 5 | V+ | power_in | Positive supply voltage; the recommended supply range is VS = (V+) - (V-) = 2.7 V to 5.5 V, with a 6 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-SC70-5 (DCK) |
| Category | |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | -4 | 0.5 | 4 | mV | VS = 5V, VCM = VS / 2 | 6 |
| Input offset voltage over temperature | VIO | -4.5 | 4.5 | mV | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 6 | |
| Hysteresis | VHYS | 0.5 | 1.55 | 3 | mV | VS = 5V, VCM = VS / 2 | 6 |
| Input bias current | IB | 0.01 | 10 | nA | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 6 | |
| Supply current per channel | IQ | 200 | 250 | uA | VS = 2.7V and 5V, no load, Output Low | 6 | |
| Supply current per channel over temperature | IQ | 350 | uA | VS = 2.7V and 5V, no load, Output Low, TA = -40 to 125℃ | 6 | ||
| Propagation delay, high to low (single and dual) | tPHL | 15 | 25 | ns | Midpoint of input to midpoint of output, VOD = 50mV; VS = 5V, VCM = VS / 2, CL = 15pF | 7 | |
| Propagation delay, low to high (single and dual) | tPLH | 15 | 25 | ns | Midpoint of input to midpoint of output, VOD = 50mV; VS = 5V, VCM = VS / 2, CL = 15pF | 7 | |
| Supply voltage | VS = (V+) - (V-) | 2.7 | 5.5 | V | Over operating free-air temperature range | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Supply voltage | VS = (V+) - (V-) | 6 | V | Over operating free-air temperature range | 4 | ||
| Differential input voltage | VID | -6 | 6 | V | Over operating free-air temperature range | 4 | |
| Current into input pins | IN+, IN- | -10 | 10 | mA | Over operating free-air temperature range | 4 | |
| Output short-circuit current | -100 | 100 | mA | Over operating free-air temperature range | 4 | ||
| Junction temperature | TJ | 150 | °C | Over operating free-air temperature range | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | Over operating free-air temperature range | 4 | |
| Junction-to-ambient thermal resistance (DCK, SC70) | RθJA | 220 | °C/W | DCK (SC70) 5-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (DCK, SC70) | RθJC(top) | 135 | °C/W | DCK (SC70) 5-pin package | 5 | ||
| Junction-to-board thermal resistance (DCK, SC70) | RθJB | 65 | °C/W | DCK (SC70) 5-pin package | 5 | ||
| Junction-to-top characterization parameter (DCK, SC70) | ΨJT | 34 | °C/W | DCK (SC70) 5-pin package | 5 | ||
| Junction-to-board characterization parameter (DCK, SC70) | ΨJB | 65 | °C/W | DCK (SC70) 5-pin package | 5 |
CAD (Adom-generated)
- Symbol:
TLV3231 - Footprint:
Adom_Gen:Texas_Instruments_TLV3231 - 3D model: generated to fit the land (STEP)
- 3D model files:
tlv3231-etched.step/tlv3231-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3231.step/tlv3231.glbare the bare package body.
Provenance
No distributor stocks TLV3231 yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
a07d93a06d924075, retrieved 2026-11-04, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.