Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

Hi1503E

Hichips(智芯) · IC · ESOP-8

Hi1503E from Hichips(智芯), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIM input PWM dimming input, which is pulled high by default when floating; a low level turns the output off, and the chip enters sleep mode if low for more than 120 ms.
2 CLPF passive Reference filter capacitor connection, which the datasheet specifies as a reference-filter capacitor pin.
3 OVP input Overvoltage protection input; the output turns off when the OVP voltage rises above 1.2 V (typical), and the pin also supports reverse PWM dimming.
4 PG unconnected Left floating by default; the datasheet states it is not allowed to be connected to any circuit.
5 CS input Output current sense input; the external CS resistor sets the output current, with a typical constant-current regulation voltage of 255 mV (VCS) at VIN = 5 V.
6 VIN power_in Supply input for the chip, operating over 5-80 V (absolute maximum -0.3 to 80 V).
7 GND power_in Chip ground.
8 VDD power_out Internal power node (from the built-in LDO) listed as 'internal power' in the datasheet; no voltage or load limit is given for this pin.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Hichips(智芯)
Package ESOP-8
Category
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VIN (electrical range) VIN 5 80 V 4
Output current IOUT IOUT 1000 mA 4
PWM detection threshold upper limit (rising) VDIM_H 1.3 V PWM rising 4
PWM detection threshold lower limit (falling) VDIM_L 0.6 V PWM falling 4
Absolute max supply voltage (chip operating supply) VIN -0.3 80 V 3
Absolute max constant-current output port voltage (Hi1503E) VD -0.3 30 V Hi1503E 3
Absolute max voltage on other pins -0.3 6 V 3
Maximum power dissipation PD PD 1 W 注 2 (PD=(TJMAX-TA)/RθJA or the limit given, whichever is lower) 3
Storage temperature TSTG TSTG -40 150 ℃ 3
Operating junction temperature TJ TJ -40 125 ℃ 3
ESD HBM (human body model) VESD 2 KV HBM; printed as '>2' 3
Thermal resistance junction to ambient RθJA 65 ℃/W PN junction to ambient; single value printed, placed in typ column 3
Quiescent/operating current IDD IDD 0.7 mA VIN=5V 4
Standby current Istandby Istandby 100 uA VIN=5V 4
Constant-current regulation voltage VCS VCS 255 mV VIN=5V 4
Constant-current knee voltage VD VD 400 mV IOUT=0.5A 4
Overvoltage protection threshold VOVP VOVP 1.2 V 高于 1.2V 输出关闭 (output off above 1.2V) 4
Maximum junction temperature with thermal foldback Tj,MAX Tj,MAX 135 ℃ Current reduced by over-temperature foldback 4

CAD (KiCad official)

  • Symbol: Hi1503E
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: hi1503e-etched.step / hi1503e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hi1503e.step / hi1503e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Hichips(智芯) datasheet (8 pp, sha256 2ffec4e26bdb2b67, retrieved 2026-11-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF