3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHi1503E
Hichips(智芯) · IC · ESOP-8
Hi1503E from Hichips(智芯), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIM | input | PWM dimming input, which is pulled high by default when floating; a low level turns the output off, and the chip enters sleep mode if low for more than 120 ms. |
| 2 | CLPF | passive | Reference filter capacitor connection, which the datasheet specifies as a reference-filter capacitor pin. |
| 3 | OVP | input | Overvoltage protection input; the output turns off when the OVP voltage rises above 1.2 V (typical), and the pin also supports reverse PWM dimming. |
| 4 | PG | unconnected | Left floating by default; the datasheet states it is not allowed to be connected to any circuit. |
| 5 | CS | input | Output current sense input; the external CS resistor sets the output current, with a typical constant-current regulation voltage of 255 mV (VCS) at VIN = 5 V. |
| 6 | VIN | power_in | Supply input for the chip, operating over 5-80 V (absolute maximum -0.3 to 80 V). |
| 7 | GND | power_in | Chip ground. |
| 8 | VDD | power_out | Internal power node (from the built-in LDO) listed as 'internal power' in the datasheet; no voltage or load limit is given for this pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hichips(智芯) |
| Package | ESOP-8 |
| Category | |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VIN (electrical range) | VIN | 5 | 80 | V | 4 | ||
| Output current IOUT | IOUT | 1000 | mA | 4 | |||
| PWM detection threshold upper limit (rising) | VDIM_H | 1.3 | V | PWM rising | 4 | ||
| PWM detection threshold lower limit (falling) | VDIM_L | 0.6 | V | PWM falling | 4 | ||
| Absolute max supply voltage (chip operating supply) | VIN | -0.3 | 80 | V | 3 | ||
| Absolute max constant-current output port voltage (Hi1503E) | VD | -0.3 | 30 | V | Hi1503E | 3 | |
| Absolute max voltage on other pins | -0.3 | 6 | V | 3 | |||
| Maximum power dissipation PD | PD | 1 | W | 注 2 (PD=(TJMAX-TA)/RθJA or the limit given, whichever is lower) | 3 | ||
| Storage temperature TSTG | TSTG | -40 | 150 | ℃ | 3 | ||
| Operating junction temperature TJ | TJ | -40 | 125 | ℃ | 3 | ||
| ESD HBM (human body model) | VESD | 2 | KV | HBM; printed as '>2' | 3 | ||
| Thermal resistance junction to ambient | RθJA | 65 | ℃/W | PN junction to ambient; single value printed, placed in typ column | 3 | ||
| Quiescent/operating current IDD | IDD | 0.7 | mA | VIN=5V | 4 | ||
| Standby current Istandby | Istandby | 100 | uA | VIN=5V | 4 | ||
| Constant-current regulation voltage VCS | VCS | 255 | mV | VIN=5V | 4 | ||
| Constant-current knee voltage VD | VD | 400 | mV | IOUT=0.5A | 4 | ||
| Overvoltage protection threshold VOVP | VOVP | 1.2 | V | 高于 1.2V 输出关闭 (output off above 1.2V) | 4 | ||
| Maximum junction temperature with thermal foldback Tj,MAX | Tj,MAX | 135 | ℃ | Current reduced by over-temperature foldback | 4 |
CAD (KiCad official)
- Symbol:
Hi1503E - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
hi1503e-etched.step/hi1503e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hi1503e.step/hi1503e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hichips(智芯) datasheet (8 pp, sha256
2ffec4e26bdb2b67, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).