Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX706PCSA-HXY

HXY MOSFET · Monitors & Reset Circuits · SOP-8

MAX706PCSA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 !MR input Manual reset input with an internal pull-up resistor of 10k to 40k ohms (20k typical).
2 VCC power_in Power supply input; the 706P device operates from 3.0V to 5.5V.
3 GND power_in Ground.
4 PFI input Inverting input of the internal 1.25V comparator (falling threshold 1.2V to 1.3V); connect to GND or VCC when unused.
5 !PFO output Output of the internal 1.25V comparator.
6 WDI input Watchdog input; leaving it floating disables the watchdog timer, whose timeout is 1.6s typical.
7 RESET output Active-high reset signal output, the inverse of !RESET, with a typical reset pulse width of 200ms.
8 !WDO output Watchdog output.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range (706xC) VCC 1.1 5.5 V 706xC, 708xC, 813L 5
Supply current ICC 75 140 µA VCC < 3.6V, 706xC, MR = VCC, WDI open 5
Reset threshold (P/R type) VRT 2.55 2.63 2.7 V P、R 型器件 5
Reset threshold hysteresis 40 mV 5
RESET pulse width (P/R type) tRS 140 200 280 ms P、R 型器件, VCC = 3V 5
!MR pulse width tMR 150 ns 4.5V < VCC < 5.5V 5
!MR pulse width tMR 500 ns P/R/S/T 型器件, VRST(MAX) < VCC < 3.6V 5
!MR to RESET output delay tMD 250 ns 4.5V < VCC < 5.5V 6
!MR input threshold high VIH 2 V 4.5V < VCC < 5.5V 6
!MR input threshold low VIL 0.8 V 4.5V < VCC < 5.5V 6
!MR pull-up resistance RP 10 20 40 kΩ 6
!RESET output low voltage VOL 0.4 V ISINK = 3.2mA, 4.5V < VCC < 5.5V 6
!RESET output low voltage VOL 0.3 V ISINK = 1.2mA, VRST(MAX) < VCC < 4.5V 6
RESET output low voltage (706P) VOL 0.4 V ISINK = 3.2mA, 4.5V < VCC < 5.5V 6
RESET output low voltage (706P) VOL 0.3 V ISINK = 1.2mA, VRST(MAX) < VCC < 3.6V 6
Watchdog delay time (706P/R) tWD 1 1.6 2.25 s 706P/R 型器件, VCC = 3V 7
WDI pulse width tWP 100 ns VIL = 0.4V, VIH = 0.8VCC, VRST(MAX) < VCC < 4.5V 7
WDI pulse width tWP 50 ns VIL = 0.4V, VIH = 0.8VCC, 4.5V < VCC < 5.5V 7
WDI input threshold high VIH 3.5 V VCC = 5V 7
WDI input threshold low VIL 0.8 V 7
WDI input current high 50 150 µA WDI = VCC, 706 型器件 7
WDI input current low -150 -50 µA WDI = 0V, 706 型器件 7
!WDO output low voltage VOL 0.4 V ISINK = 1.2mA, 4.5V < VCC < 5.5V 8
!WDO output low voltage VOL 0.3 V ISINK = 500µA, VRST(MAX) < VCC < 4.5V 8
PFI input threshold (falling) 1.2 1.25 1.3 V PFI falling, P/R 型器件 VCC = 3V 8
PFI input current -25 0.01 25 nA 8
!PFO output low voltage VOL 0.4 V ISINK = 3.2mA, 4.5V < VCC < 5.5V 8
!PFO output low voltage VOL 0.3 V ISINK = 1.2mA, VRS(MAX) < VCC < 4.5V 8
Operating temperature range (commercial C) 0 70 °C 706PCSA, 8-pin SOP(SOIC) 16

CAD (KiCad official)

  • Symbol: MAX706PCSA-HXY
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max706pcsa-hxy-etched.step / max706pcsa-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max706pcsa-hxy.step / max706pcsa-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (20 pp, sha256 519b55ef659b3c93, retrieved 2026-11-02, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF