3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX706PCSA-HXY
HXY MOSFET · Monitors & Reset Circuits · SOP-8
MAX706PCSA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | !MR | input | Manual reset input with an internal pull-up resistor of 10k to 40k ohms (20k typical). |
| 2 | VCC | power_in | Power supply input; the 706P device operates from 3.0V to 5.5V. |
| 3 | GND | power_in | Ground. |
| 4 | PFI | input | Inverting input of the internal 1.25V comparator (falling threshold 1.2V to 1.3V); connect to GND or VCC when unused. |
| 5 | !PFO | output | Output of the internal 1.25V comparator. |
| 6 | WDI | input | Watchdog input; leaving it floating disables the watchdog timer, whose timeout is 1.6s typical. |
| 7 | RESET | output | Active-high reset signal output, the inverse of !RESET, with a typical reset pulse width of 200ms. |
| 8 | !WDO | output | Watchdog output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range (706xC) | VCC | 1.1 | 5.5 | V | 706xC, 708xC, 813L | 5 | |
| Supply current | ICC | 75 | 140 | µA | VCC < 3.6V, 706xC, MR = VCC, WDI open | 5 | |
| Reset threshold (P/R type) | VRT | 2.55 | 2.63 | 2.7 | V | P、R 型器件 | 5 |
| Reset threshold hysteresis | 40 | mV | 5 | ||||
| RESET pulse width (P/R type) | tRS | 140 | 200 | 280 | ms | P、R 型器件, VCC = 3V | 5 |
| !MR pulse width | tMR | 150 | ns | 4.5V < VCC < 5.5V | 5 | ||
| !MR pulse width | tMR | 500 | ns | P/R/S/T 型器件, VRST(MAX) < VCC < 3.6V | 5 | ||
| !MR to RESET output delay | tMD | 250 | ns | 4.5V < VCC < 5.5V | 6 | ||
| !MR input threshold high | VIH | 2 | V | 4.5V < VCC < 5.5V | 6 | ||
| !MR input threshold low | VIL | 0.8 | V | 4.5V < VCC < 5.5V | 6 | ||
| !MR pull-up resistance | RP | 10 | 20 | 40 | kΩ | 6 | |
| !RESET output low voltage | VOL | 0.4 | V | ISINK = 3.2mA, 4.5V < VCC < 5.5V | 6 | ||
| !RESET output low voltage | VOL | 0.3 | V | ISINK = 1.2mA, VRST(MAX) < VCC < 4.5V | 6 | ||
| RESET output low voltage (706P) | VOL | 0.4 | V | ISINK = 3.2mA, 4.5V < VCC < 5.5V | 6 | ||
| RESET output low voltage (706P) | VOL | 0.3 | V | ISINK = 1.2mA, VRST(MAX) < VCC < 3.6V | 6 | ||
| Watchdog delay time (706P/R) | tWD | 1 | 1.6 | 2.25 | s | 706P/R 型器件, VCC = 3V | 7 |
| WDI pulse width | tWP | 100 | ns | VIL = 0.4V, VIH = 0.8VCC, VRST(MAX) < VCC < 4.5V | 7 | ||
| WDI pulse width | tWP | 50 | ns | VIL = 0.4V, VIH = 0.8VCC, 4.5V < VCC < 5.5V | 7 | ||
| WDI input threshold high | VIH | 3.5 | V | VCC = 5V | 7 | ||
| WDI input threshold low | VIL | 0.8 | V | 7 | |||
| WDI input current high | 50 | 150 | µA | WDI = VCC, 706 型器件 | 7 | ||
| WDI input current low | -150 | -50 | µA | WDI = 0V, 706 型器件 | 7 | ||
| !WDO output low voltage | VOL | 0.4 | V | ISINK = 1.2mA, 4.5V < VCC < 5.5V | 8 | ||
| !WDO output low voltage | VOL | 0.3 | V | ISINK = 500µA, VRST(MAX) < VCC < 4.5V | 8 | ||
| PFI input threshold (falling) | 1.2 | 1.25 | 1.3 | V | PFI falling, P/R 型器件 VCC = 3V | 8 | |
| PFI input current | -25 | 0.01 | 25 | nA | 8 | ||
| !PFO output low voltage | VOL | 0.4 | V | ISINK = 3.2mA, 4.5V < VCC < 5.5V | 8 | ||
| !PFO output low voltage | VOL | 0.3 | V | ISINK = 1.2mA, VRS(MAX) < VCC < 4.5V | 8 | ||
| Operating temperature range (commercial C) | 0 | 70 | °C | 706PCSA, 8-pin SOP(SOIC) | 16 |
CAD (KiCad official)
- Symbol:
MAX706PCSA-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max706pcsa-hxy-etched.step/max706pcsa-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max706pcsa-hxy.step/max706pcsa-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (20 pp, sha256
519b55ef659b3c93, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).