component
FT25C32A-USR-T
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFT25C32A-USR-T
FMD(Fremont Micro Devices) · EEPROM · SOP-8
FT25C32A-USR-T from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input: the device is selected when CS is low, and when it is not selected SI data is not accepted and SO stays high impedance. |
| 2 | SO | tri_state | Serial Data Output: data is shifted out after the falling edge of the serial clock during a read cycle, and the pin is high impedance when the device is not selected. |
| 3 | WP | input | Write Protect input: when WP is low and WPEN is high, writes to the non-volatile bits of the status register are disabled. |
| 4 | GND | power_in | Ground. |
| 5 | SI | input | Serial Data Input: receives instructions, addresses and data, which are latched on the rising edge of the serial clock. |
| 6 | SCL | input | Serial Clock input: synchronizes communication with the master, latching SI on the rising edge and updating SO after the falling edge, at up to 20MHz at 5V. |
| 7 | HOLD | input | Hold input: pulled low while SCK is low to pause serial communication without resetting the serial sequence, and brought high while SCK is low to resume. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
FT25C32A-USR-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ft25c32a-usr-t-etched.step/ft25c32a-usr-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft25c32a-usr-t.step/ft25c32a-usr-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FMD(Fremont Micro Devices) datasheet (16 pp, sha256
0253025d419a7d2c, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).