Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM46001PWPR

Texas Instruments · DC-DC Converters · HTSSOP-16-EP

LM46001PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching output of regulator internally connected to both power MOSFETs and connected to power inductor.
2 SW output Switching output of regulator internally connected to both power MOSFETs and connected to power inductor.
3 CBOOT power_out Bootstrap capacitor connection for high-side driver requiring 470-nF capacitor connection from CBOOT to SW.
4 VCC power_out Internal bias supply output for bypassing with bypass capacitor to AGND; do not connect external load or short to ground during operation.
5 BIAS power_in Optional internal LDO supply input tied to VOUT (3.3 V to 28 V) or external 3.3 V/5 V rail with 1-10 µF bypass capacitor, or to ground if VOUT < 3.3 V; do not float.
6 SYNC input Clock input to synchronize switching action to external clock with proper high-speed termination; connect to ground if not used; do not float.
7 RT input Resistor connection to AGND to program switching frequency; leave floating for 500 kHz default switching frequency.
8 PGOOD output Open-drain power-good flag output requiring 10-kΩ to 100-kΩ pullup resistor to logic rail or DC voltage not exceeding 12 V.
9 FB input Feedback sense input connected to midpoint of feedback divider to set VOUT; do not short to ground during operation.
10 AGND power_in Analog ground pin serving as ground reference for internal references and logic.
11 SS/TRK input Soft-start control pin left floating for internal soft-start, or connected to capacitor to extend soft-start time, or connected to external voltage ramp for tracking.
12 EN input Enable input with High = ON and Low = OFF logic; connect to VIN, VIN through resistor divider, or external voltage/logic source; do not float.
13 VIN power_in Supply input pin to internal LDO and high-side power FET; connect to power supply and bypass capacitors CIN with path from VIN to high-frequency bypass CIN and PGND kept as short as possible.
14 VIN power_in Supply input pin to internal LDO and high-side power FET; connect to power supply and bypass capacitors CIN with path from VIN to high-frequency bypass CIN and PGND kept as short as possible.
15 PGND power_in Power ground pin connected internally to low-side power FET; connect to system ground, PAD, AGND, and ground pins of CIN and COUT with path to CIN kept as short as possible.
16 PGND power_in Power ground pin connected internally to low-side power FET; connect to system ground, PAD, AGND, and ground pins of CIN and COUT with path to CIN kept as short as possible.
17 PAD power_in Low-impedance connection to AGND serving as major heat dissipation path of die; must be used for heat sinking to ground plane on PCB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to PGND -0.3 65 V 4
EN to PGND -0.3 V 4
FB, RT, SS/TRK to AGND -0.3 3.6 V 4
PGOOD to AGND -0.3 15 V 4
SYNC to AGND -0.3 5.5 V 4
BIAS to AGND -0.3 30 V 4
AGND to PGND -0.3 0.3 V 4
SW to PGND -0.3 V 4
SW to PGND transient -3.5 65 V less than 10-ns transients 4
CBOOT to SW -0.3 5.5 V 4
VCC to AGND -0.3 3.6 V 4
Storage temperature Tstg -65 150 °C 4
VIN to PGND (input voltage) 3.5 60 V 4
EN -0.3 V 4
FB -0.3 1.1 V 4
PGOOD -0.3 12 V 4
BIAS input not used -0.3 0.3 V 4
BIAS input used 3.3 28 V 4
AGND to PGND (recommended) -0.1 0.1 V 4
Output voltage adjustable VOUT 1 28 V 4
Output current IOUT 0 1 A 4
Operating junction temperature range TJ -40 125 °C 4
Shutdown quiescent current ISHDN 2.3 5 µA VEN = 0 V 5
Operating quiescent current (non-switching) from VIN IQ-NONSW 7 13 µA VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external 5
Operating quiescent current (non-switching) from external VBIAS IBIAS-NONSW 85 140 µA VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external 5
Voltage level to enable the internal LDO (VENABLE high level) VEN-VCC-H 1.2 V VENABLE high level 5
Voltage level to disable the internal LDO (VENABLE low level) VEN-VCC-L 0.4 V VENABLE low level 5
Precision enable level for switching and regulator output VEN-VOUT-H 2 2.1 2.42 V VENABLE high level 5
Enable input leakage current ILKG-EN 0.8 1.75 µA VEN = 3.3 V 5
Internal LDO input change over threshold to BIAS (rising) VBIAS-ON 2.96 3.2 V VBIAS rising threshold 5
Feedback voltage at TJ = 25°C VFB 1.009 1.016 1.023 V TJ = 25°C 6
Feedback voltage at TJ = –40°C to 85°C VFB 0.999 1.016 1.031 V TJ = –40°C to 85°C 6
Feedback voltage at TJ = –40°C to 125°C VFB 0.999 1.016 1.039 V TJ = –40°C to 125°C 6
Input leakage current at FB pin ILKG-FB 0.2 65 nA FB = 1.016 V 6
Peak inductor current limit IHS-LIMIT 2.07 2.45 2.71 A 6
Valley inductor current limit ILS-LIMIT 0.94 1.1 1.25 A 6
Soft-start charge current ISSC 1.17 2.2 2.85 µA 6
Power-good flag overvoltage tripping threshold VPGOOD-HIGH 110 113 % % of FB voltage 6
Power-good flag undervoltage tripping threshold VPGOOD-LOW 83 90 % % of FB voltage 6
PGOOD pin pulldown resistance when power bad (VEN = 3.3 V) RPGOOD 40 125 Ω VEN = 3.3 V 6
PGOOD pin pulldown resistance when power bad (VEN = 0 V) RPGOOD 60 150 Ω VEN = 0 V 6
Minimum high side MOSFET ON-time tON-MIN 125 165 ns 7
Minimum high side MOSFET OFF-time tOFF-MIN 200 250 ns 7
Oscillator default frequency FOSC-DEFAULT 445 500 570 kHz RT pin open circuit 7
Minimum adjustable frequency FADJ 200 kHz With 1% resistors at RT pin 7
Maximum adjustable frequency FADJ 2200 kHz 7
Sync clock high level threshold VSYNC-HIGH 2 V 7
Sync clock low level threshold VSYNC-LOW 0.4 V 7
Sync clock maximum duty cycle DSYNC-MAX 90 % 7
Sync clock minimum duty cycle DSYNC-MIN 10 % 7
Minimum sync clock ON- and OFF-time tSYNC-MIN 80 ns 7
Junction-to-ambient thermal resistance RθJA 39.9 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 26.9 °C/W 5
Junction-to-board thermal resistance RθJB 21.7 °C/W 5
Junction-to-top characterization parameter ψJT 0.8 °C/W 5
Junction-to-board characterization parameter ψJB 21.5 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 2.3 °C/W 5

CAD (KiCad official)

  • Symbol: LM46001PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: lm46001pwpr-etched.step / lm46001pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm46001pwpr.step / lm46001pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 03496a33574d38df, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF