Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MPQ4420HGJ-AEC1-Z

Monolithic Power Systems · DC-DC Converters · TSOT-23-8

MPQ4420HGJ-AEC1-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG output Power Good is an open-drain output that goes high when the output voltage exceeds 90% of the nominal voltage.
2 IN power_in Supply voltage input that operates from a 4V to 36V input rail and requires C1 to decouple the input rail, connected with a wide PCB trace.
3 SW output Switch output that must be connected using a wide PCB trace.
4 GND power_in System ground and reference ground of the regulated output voltage, which requires copper traces and vias for best results.
5 BST passive Bootstrap pin that requires a capacitor between SW and BST to form a floating high-side driver supply, with a 20Ω resistor strongly recommended to reduce SW spike voltage.
6 EN/SYNC input Enable/synchronize input where driving EN high enables the MPQ4420H, and an external clock of 200kHz to 2.2MHz applied to this pin changes the switching frequency.
7 VCC power_out Bias supply output from the internal regulator that should be decoupled with a 0.1µF to 0.22µF capacitor and must not exceed 0.22µF.
8 FB input Feedback input connected to the external resistor divider tap to set the output voltage, where frequency fold-back lowers the oscillator frequency when FB is below 660mV.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Power Management
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 4 GND System Ground. This pin is the reference ground of the regulated output voltage, and PCB layout requires special care. For best results, connect to GND with copper traces and vias. 6

CAD (KiCad official)

  • Symbol: MPQ4420HGJ-AEC1-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mpq4420hgj-aec1-z-etched.step / mpq4420hgj-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq4420hgj-aec1-z.step / mpq4420hgj-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (20 pp, sha256 e77035a5fff214d9, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF