Generated by kicad-footprint-generator · KiCad file format 20260206
MPQ4420HGJ-AEC1-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MPQ4420HGJ-AEC1-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Power Good is an open-drain output that goes high when the output voltage exceeds 90% of the nominal voltage. |
| 2 | IN | power_in | Supply voltage input that operates from a 4V to 36V input rail and requires C1 to decouple the input rail, connected with a wide PCB trace. |
| 3 | SW | output | Switch output that must be connected using a wide PCB trace. |
| 4 | GND | power_in | System ground and reference ground of the regulated output voltage, which requires copper traces and vias for best results. |
| 5 | BST | passive | Bootstrap pin that requires a capacitor between SW and BST to form a floating high-side driver supply, with a 20Ω resistor strongly recommended to reduce SW spike voltage. |
| 6 | EN/SYNC | input | Enable/synchronize input where driving EN high enables the MPQ4420H, and an external clock of 200kHz to 2.2MHz applied to this pin changes the switching frequency. |
| 7 | VCC | power_out | Bias supply output from the internal regulator that should be decoupled with a 0.1µF to 0.22µF capacitor and must not exceed 0.22µF. |
| 8 | FB | input | Feedback input connected to the external resistor divider tap to set the output voltage, where frequency fold-back lowers the oscillator frequency when FB is below 660mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 4 GND System Ground. This pin is the reference ground of the regulated output voltage, and PCB layout requires special care. For best results, connect to GND with copper traces and vias. | 6 |
CAD (KiCad official)
- Symbol:
MPQ4420HGJ-AEC1-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mpq4420hgj-aec1-z-etched.step/mpq4420hgj-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq4420hgj-aec1-z.step/mpq4420hgj-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (20 pp, sha256
e77035a5fff214d9, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).