3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2902LVIPWR
Texas Instruments · Operational Amplifier · TSSOP-14
LM2902LVIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of channel 1, per Table 5-2 of the LM2902LV TSSOP (PW) package. |
| 2 | IN1- | input | Inverting input of channel 1. |
| 3 | IN1+ | input | Noninverting input of channel 1; input common-mode range includes the negative supply rail. |
| 4 | V+ | power_in | Positive (high) supply; the device operates from 2.7 V to 5.5 V supply voltage. |
| 5 | IN2+ | input | Noninverting input of channel 2; input common-mode range includes the negative supply rail. |
| 6 | IN2- | input | Inverting input of channel 2. |
| 7 | OUT2 | output | Output of channel 2. |
| 8 | OUT3 | output | Output of channel 3. |
| 9 | IN3- | input | Inverting input of channel 3. |
| 10 | IN3+ | input | Noninverting input of channel 3; input common-mode range includes the negative supply rail. |
| 11 | V- | power_in | Negative (low) supply or ground for single-supply operation; the input common-mode range extends to this rail. |
| 12 | IN4+ | input | Noninverting input of channel 4; input common-mode range includes the negative supply rail. |
| 13 | IN4- | input | Inverting input of channel 4. |
| 14 | OUT4 | output | Output of channel 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, (V+) - (V-) | 0 | 6 | V | 5 | |||
| Signal input current | -10 | 10 | mA | Signal input pins | 5 | ||
| Operating temperature, TA | TA | -55 | 125 | °C | Operating | 5 | |
| Operating junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage [(V+) - (V-)] | VS | 2.7 | 5.5 | V | 5 | ||
| Specified temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 148.3 | °C/W | PW (TSSOP) 14 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 68.1 | °C/W | PW (TSSOP) 14 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 92.7 | °C/W | PW (TSSOP) 14 pins | 6 | ||
| Junction-to-top characterization parameter | ψJT | 16.9 | °C/W | PW (TSSOP) 14 pins | 6 | ||
| Junction-to-board characterization parameter | ψJB | 91.8 | °C/W | PW (TSSOP) 14 pins | 6 | ||
| Input offset voltage | VOS | 1 | 3 | mV | VS = 5 V | 6 | |
| Input offset voltage over temperature | VOS | 5 | mV | VS = 5 V, TA = -40°C to 125°C | 6 | ||
| VOS vs temperature | dVOS/dT | 4 | µV/°C | TA = -40°C to 125°C | 6 | ||
| Power-supply rejection ratio | PSRR | 80 | 100 | dB | VS = 2.7 V to 5.5 V, VCM = (V-) | 6 | |
| Common-mode rejection ratio | CMRR | 84 | dB | VS = 2.7 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C | 6 | ||
| Common-mode rejection ratio | CMRR | 63 | 92 | dB | VS = 5.5 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C | 6 | |
| Input bias current | IB | 15 | pA | VS = 5 V | 6 | ||
| Input offset current | IOS | 5 | pA | 6 | |||
| Input voltage noise (peak-to-peak) | En | 5.1 | µVPP | f = 0.1 Hz to 10 Hz, VS = 5 V | 6 | ||
| Input voltage noise density | en | 40 | nV/√Hz | f = 1 kHz, VS = 5 V | 6 | ||
| Differential input capacitance | CID | 2 | pF | Differential | 6 | ||
| Common-mode input capacitance | CIC | 5.5 | pF | Common-mode | 6 | ||
| Open-loop voltage gain | AOL | 110 | dB | VS = 2.7 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 6 | ||
| Open-loop voltage gain | AOL | 125 | dB | VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 6 | ||
| Gain-bandwidth product | GBW | 1 | MHz | VS = 5 V | 6 | ||
| Phase margin | φm | 75 | ° | VS = 5.5 V, G = 1 | 6 | ||
| Slew rate | SR | 1.5 | V/µs | VS = 5 V | 6 | ||
| Settling time to 0.1% | tS | 4 | µs | To 0.1%, VS = 5 V, 2-V step, G = 1, CL = 100 pF | 6 | ||
| Settling time to 0.01% | tS | 5 | µs | To 0.01%, VS = 5 V, 2-V step, G = 1, CL = 100 pF | 6 | ||
| Overload recovery time | tOR | 1 | µs | VS = 5 V, VIN × gain > VS | 6 | ||
| Total harmonic distortion + noise | THD+N | 0.005 | % | VS = 5.5 V, VCM = 2.5 V, VO = 1 VRMS, G = 1, ƒ = 1 kHz, 80-kHz measurement BW | 6 | ||
| Voltage output swing from positive supply | VOH | 1 | V | RL ≥ 2 kΩ, TA = -40°C to 125°C | 6 | ||
| Voltage output swing from negative supply | VOL | 40 | 75 | mV | RL ≤ 10 kΩ, TA = -40°C to 125°C | 6 | |
| Short-circuit current | ISC | 40 | mA | VS = 5.5 V | 6 | ||
| Open-loop output impedance | ZO | 1200 | Ω | VS = 5 V, ƒ = 1 MHz | 6 | ||
| Specified voltage range | VS | 2.7 | 5.5 | V | 7 | ||
| Quiescent current per amplifier | IQ | 90 | 150 | µA | IO = 0 mA, VS = 5.5 V | 7 | |
| Quiescent current per amplifier over temperature | IQ | 160 | µA | IO = 0 mA, VS = 5.5 V, TA = -40°C to 125°C | 7 |
CAD (KiCad official)
- Symbol:
LM2902LVIPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm2902lvipwr-etched.step/lm2902lvipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2902lvipwr.step/lm2902lvipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
ddf109089a0a713c, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).