main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2902lvipwr: viewers · Ray
lm2902lvipwr-etched.glb Publish 0.1.0 · Ray
lm2902lvipwr-etched.step lm2902lvipwr: factory component page (tier=mfr) · Ray
lm2902lvipwr-hero.glb lm2902lvipwr: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2902lvipwr-hero.overlay.json Publish 0.1.0 · Ray
lm2902lvipwr.glb Publish 0.1.0 · Ray
lm2902lvipwr.kicad_mod Publish 0.1.0 · Ray
lm2902lvipwr.kicad_sym Publish 0.1.0 · Ray
lm2902lvipwr.lbr Publish 0.1.0 · Ray
lm2902lvipwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

LM2902LVIPWR

Texas Instruments · Operational Amplifier · TSSOP-14

LM2902LVIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of channel 1, per Table 5-2 of the LM2902LV TSSOP (PW) package.
2 IN1- input Inverting input of channel 1.
3 IN1+ input Noninverting input of channel 1; input common-mode range includes the negative supply rail.
4 V+ power_in Positive (high) supply; the device operates from 2.7 V to 5.5 V supply voltage.
5 IN2+ input Noninverting input of channel 2; input common-mode range includes the negative supply rail.
6 IN2- input Inverting input of channel 2.
7 OUT2 output Output of channel 2.
8 OUT3 output Output of channel 3.
9 IN3- input Inverting input of channel 3.
10 IN3+ input Noninverting input of channel 3; input common-mode range includes the negative supply rail.
11 V- power_in Negative (low) supply or ground for single-supply operation; the input common-mode range extends to this rail.
12 IN4+ input Noninverting input of channel 4; input common-mode range includes the negative supply rail.
13 IN4- input Inverting input of channel 4.
14 OUT4 output Output of channel 4.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, (V+) - (V-) 0 6 V 5
Signal input current -10 10 mA Signal input pins 5
Operating temperature, TA TA -55 125 °C Operating 5
Operating junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage [(V+) - (V-)] VS 2.7 5.5 V 5
Specified temperature TA -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 148.3 °C/W PW (TSSOP) 14 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 68.1 °C/W PW (TSSOP) 14 pins 6
Junction-to-board thermal resistance RθJB 92.7 °C/W PW (TSSOP) 14 pins 6
Junction-to-top characterization parameter ψJT 16.9 °C/W PW (TSSOP) 14 pins 6
Junction-to-board characterization parameter ψJB 91.8 °C/W PW (TSSOP) 14 pins 6
Input offset voltage VOS 1 3 mV VS = 5 V 6
Input offset voltage over temperature VOS 5 mV VS = 5 V, TA = -40°C to 125°C 6
VOS vs temperature dVOS/dT 4 µV/°C TA = -40°C to 125°C 6
Power-supply rejection ratio PSRR 80 100 dB VS = 2.7 V to 5.5 V, VCM = (V-) 6
Common-mode rejection ratio CMRR 84 dB VS = 2.7 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C 6
Common-mode rejection ratio CMRR 63 92 dB VS = 5.5 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C 6
Input bias current IB 15 pA VS = 5 V 6
Input offset current IOS 5 pA 6
Input voltage noise (peak-to-peak) En 5.1 µVPP f = 0.1 Hz to 10 Hz, VS = 5 V 6
Input voltage noise density en 40 nV/√Hz f = 1 kHz, VS = 5 V 6
Differential input capacitance CID 2 pF Differential 6
Common-mode input capacitance CIC 5.5 pF Common-mode 6
Open-loop voltage gain AOL 110 dB VS = 2.7 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ 6
Open-loop voltage gain AOL 125 dB VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ 6
Gain-bandwidth product GBW 1 MHz VS = 5 V 6
Phase margin φm 75 ° VS = 5.5 V, G = 1 6
Slew rate SR 1.5 V/µs VS = 5 V 6
Settling time to 0.1% tS 4 µs To 0.1%, VS = 5 V, 2-V step, G = 1, CL = 100 pF 6
Settling time to 0.01% tS 5 µs To 0.01%, VS = 5 V, 2-V step, G = 1, CL = 100 pF 6
Overload recovery time tOR 1 µs VS = 5 V, VIN × gain > VS 6
Total harmonic distortion + noise THD+N 0.005 % VS = 5.5 V, VCM = 2.5 V, VO = 1 VRMS, G = 1, ƒ = 1 kHz, 80-kHz measurement BW 6
Voltage output swing from positive supply VOH 1 V RL ≥ 2 kΩ, TA = -40°C to 125°C 6
Voltage output swing from negative supply VOL 40 75 mV RL ≤ 10 kΩ, TA = -40°C to 125°C 6
Short-circuit current ISC 40 mA VS = 5.5 V 6
Open-loop output impedance ZO 1200 Ω VS = 5 V, ƒ = 1 MHz 6
Specified voltage range VS 2.7 5.5 V 7
Quiescent current per amplifier IQ 90 150 µA IO = 0 mA, VS = 5.5 V 7
Quiescent current per amplifier over temperature IQ 160 µA IO = 0 mA, VS = 5.5 V, TA = -40°C to 125°C 7

CAD (KiCad official)

  • Symbol: LM2902LVIPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm2902lvipwr-etched.step / lm2902lvipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2902lvipwr.step / lm2902lvipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 ddf109089a0a713c, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF