Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM306D

Texas Instruments · Comparators · SOIC-8

LM306D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Network ground reference for all voltages except the differential input and output-to-VCC− voltages.
2 IN+ input Non-inverting comparator input; the differential input voltage range is ±5 V and the common-mode range is ±5 V.
3 IN− input Inverting comparator input; input voltage magnitude must never exceed the supply magnitude or 7 V, whichever is less.
4 VCC− power_in Negative supply, operable from −3 V to −12 V with little difference in performance.
5 STROBE 1 input Strobe input where a low level (below 0.9 V) forces the output high regardless of the differential input.
6 STROBE 2 input Strobe input where a low level (below 0.9 V) forces the output high regardless of the differential input.
7 OUT output Low-impedance output sinking up to 100 mA, with an absolute maximum output voltage of 24 V and 30 V from output to VCC−.
8 VCC+ power_in Positive supply with an absolute maximum rating of 15 V, operated at 12 V in the electrical characteristics.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 1.6 5 mV RS ≤ 200 Ω; 25°C 4
Input offset voltage VIO 6.5 mV RS ≤ 200 Ω; Full range (0°C to 70°C) 4
Average temperature coefficient of input offset voltage αVIO 5 20 µV/°C RS = 50 Ω, See Note 5; Full range 4
Input offset current IIO 1 7.5 µA See Note 5; MIN (0°C) 4
Input offset current IIO 0.5 5 µA See Note 5; MAX (70°C) 4
Input offset current IIO 1.8 5 µA See Note 5; 25°C 4
Average temperature coefficient of input offset current αIIO 24 100 nA/°C See Note 5; MIN to 25°C 4
Average temperature coefficient of input offset current αIIO 15 50 nA/°C See Note 5; 25°C to MAX 4
Input bias current IIB 40 µA VO = 0.5 V to 5 V; MIN to 25°C 4
Input bias current IIB 16 25 µA VO = 0.5 V to 5 V; 25°C to MAX 4
Low-level strobe current IIL(S) -1.7 -3.2 mA V(strobe) = 0.4 V; Full range 4
High-level strobe voltage VIH(S) 2.2 V Full range 4
Low-level strobe voltage VIL(S) 0.9 V Full range 4
Common-mode input voltage range VICR -5 5 V VCC− = −7 V to −12 V; Full range 4
Differential input voltage range VID -5 5 V Full range 4
Large-signal differential voltage amplification AVD 40 V/mV VO = 0.5 V to 5 V, No load; 25°C 4
High-level output voltage VOH 2.5 5.5 V IOH = −400 µA, VID = 8 mV; Full range 4
Low-level output voltage VOL 0.8 2 V IOL = 100 mA, VID = −7 mV; 25°C 4
Low-level output voltage VOL 1 V IOL = 50 mA, VID = −7 mV; Full range 4
Low-level output voltage VOL 0.4 V IOL = 16 mA, VID = −8 mV; Full range 4
High-level output current IOH 0.02 2 µA VOH = 8 V to 24 V, VID = 7 mV; MIN to 25°C 4
High-level output current IOH 100 µA VOH = 8 V to 24 V, VID = 8 mV; 25°C to MAX 4
Supply current from VCC+ ICC+ 6.6 10 mA VID = −5 mV, No load; Full range 4
Supply current from VCC− ICC− -1.9 -3.6 mA No load; Full range 4
Response time, low-to-high-level output 28 40 ns RL = 390 Ω to 5 V, CL = 15 pF; TA = 25°C 4
Supply voltage VCC+ VCC+ 15 V See Note 1 3
Supply voltage VCC− VCC− -15 V See Note 1 3
Differential input voltage VID -5 5 V See Note 2 3
Input voltage, either input VI -7 7 V See Notes 1 and 3 3
Strobe voltage range 0 V To VCC+ (see Note 1) 3
Output voltage VO 24 V See Note 1 3
Voltage from output to VCC− 30 V 3
Duration of output short circuit to ground 10 s See Note 4 3
Operating free-air temperature range TA 0 70 °C 3
Storage temperature range TSTORE -65 150 °C 3
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 3
Power rating, D package PD 600 mW TA ≤ 25°C 3
Derating factor, D package 5.8 mW/°C Derate above TA = 46°C 3

CAD (KiCad official)

  • Symbol: LM306D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm306d-etched.step / lm306d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm306d.step / lm306d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (15 pp, sha256 698201f82d8e81b3, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF