Generated by kicad-footprint-generator · KiCad file format 20260206
LM306D
Texas Instruments · Comparators · SOIC-8
LM306D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Network ground reference for all voltages except the differential input and output-to-VCC− voltages. |
| 2 | IN+ | input | Non-inverting comparator input; the differential input voltage range is ±5 V and the common-mode range is ±5 V. |
| 3 | IN− | input | Inverting comparator input; input voltage magnitude must never exceed the supply magnitude or 7 V, whichever is less. |
| 4 | VCC− | power_in | Negative supply, operable from −3 V to −12 V with little difference in performance. |
| 5 | STROBE 1 | input | Strobe input where a low level (below 0.9 V) forces the output high regardless of the differential input. |
| 6 | STROBE 2 | input | Strobe input where a low level (below 0.9 V) forces the output high regardless of the differential input. |
| 7 | OUT | output | Low-impedance output sinking up to 100 mA, with an absolute maximum output voltage of 24 V and 30 V from output to VCC−. |
| 8 | VCC+ | power_in | Positive supply with an absolute maximum rating of 15 V, operated at 12 V in the electrical characteristics. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 1.6 | 5 | mV | RS ≤ 200 Ω; 25°C | 4 | |
| Input offset voltage | VIO | 6.5 | mV | RS ≤ 200 Ω; Full range (0°C to 70°C) | 4 | ||
| Average temperature coefficient of input offset voltage | αVIO | 5 | 20 | µV/°C | RS = 50 Ω, See Note 5; Full range | 4 | |
| Input offset current | IIO | 1 | 7.5 | µA | See Note 5; MIN (0°C) | 4 | |
| Input offset current | IIO | 0.5 | 5 | µA | See Note 5; MAX (70°C) | 4 | |
| Input offset current | IIO | 1.8 | 5 | µA | See Note 5; 25°C | 4 | |
| Average temperature coefficient of input offset current | αIIO | 24 | 100 | nA/°C | See Note 5; MIN to 25°C | 4 | |
| Average temperature coefficient of input offset current | αIIO | 15 | 50 | nA/°C | See Note 5; 25°C to MAX | 4 | |
| Input bias current | IIB | 40 | µA | VO = 0.5 V to 5 V; MIN to 25°C | 4 | ||
| Input bias current | IIB | 16 | 25 | µA | VO = 0.5 V to 5 V; 25°C to MAX | 4 | |
| Low-level strobe current | IIL(S) | -1.7 | -3.2 | mA | V(strobe) = 0.4 V; Full range | 4 | |
| High-level strobe voltage | VIH(S) | 2.2 | V | Full range | 4 | ||
| Low-level strobe voltage | VIL(S) | 0.9 | V | Full range | 4 | ||
| Common-mode input voltage range | VICR | -5 | 5 | V | VCC− = −7 V to −12 V; Full range | 4 | |
| Differential input voltage range | VID | -5 | 5 | V | Full range | 4 | |
| Large-signal differential voltage amplification | AVD | 40 | V/mV | VO = 0.5 V to 5 V, No load; 25°C | 4 | ||
| High-level output voltage | VOH | 2.5 | 5.5 | V | IOH = −400 µA, VID = 8 mV; Full range | 4 | |
| Low-level output voltage | VOL | 0.8 | 2 | V | IOL = 100 mA, VID = −7 mV; 25°C | 4 | |
| Low-level output voltage | VOL | 1 | V | IOL = 50 mA, VID = −7 mV; Full range | 4 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 16 mA, VID = −8 mV; Full range | 4 | ||
| High-level output current | IOH | 0.02 | 2 | µA | VOH = 8 V to 24 V, VID = 7 mV; MIN to 25°C | 4 | |
| High-level output current | IOH | 100 | µA | VOH = 8 V to 24 V, VID = 8 mV; 25°C to MAX | 4 | ||
| Supply current from VCC+ | ICC+ | 6.6 | 10 | mA | VID = −5 mV, No load; Full range | 4 | |
| Supply current from VCC− | ICC− | -1.9 | -3.6 | mA | No load; Full range | 4 | |
| Response time, low-to-high-level output | 28 | 40 | ns | RL = 390 Ω to 5 V, CL = 15 pF; TA = 25°C | 4 | ||
| Supply voltage VCC+ | VCC+ | 15 | V | See Note 1 | 3 | ||
| Supply voltage VCC− | VCC− | -15 | V | See Note 1 | 3 | ||
| Differential input voltage | VID | -5 | 5 | V | See Note 2 | 3 | |
| Input voltage, either input | VI | -7 | 7 | V | See Notes 1 and 3 | 3 | |
| Strobe voltage range | 0 | V | To VCC+ (see Note 1) | 3 | |||
| Output voltage | VO | 24 | V | See Note 1 | 3 | ||
| Voltage from output to VCC− | 30 | V | 3 | ||||
| Duration of output short circuit to ground | 10 | s | See Note 4 | 3 | |||
| Operating free-air temperature range | TA | 0 | 70 | °C | 3 | ||
| Storage temperature range | TSTORE | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Power rating, D package | PD | 600 | mW | TA ≤ 25°C | 3 | ||
| Derating factor, D package | 5.8 | mW/°C | Derate above TA = 46°C | 3 |
CAD (KiCad official)
- Symbol:
LM306D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm306d-etched.step/lm306d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm306d.step/lm306d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (15 pp, sha256
698201f82d8e81b3, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).