Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP2019GN-Z

Monolithic Power Systems · Linear Voltage Regulators (LDO) · SOIC-8-EP

MP2019GN-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage (1.25V to 15V adjustable); only a low-value ceramic capacitor (≥0.47μF) on the output is required for stability.
2 NC unconnected No connection; do not connect.
3 GND power_in Ground; connect the exposed pad and GND to the same ground plane.
4 VIN power_in Input voltage; connect a 3V to 40V supply to VIN.
5 EN input Regulator on/off control input; logic low (<0.3V) shuts down the IC, logic high (>1.8V) starts it up, and EN can be connected to VIN for automatic start-up.
6 PG output Open-drain power-good output (pull up to VOUT or an external source below 15V through a resistor); can be left floating if not used.
7 PGDL passive Programmable power-good delay time set by a capacitor to ground; can be left floating if not used.
8 FB input Feedback input for the output-adjustable version; FB is regulated to 1.25V nominally and is used to set the output voltage via a resistor divider.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 3 40 V 4
Output-Voltage Range VOUT 1.25 15 V 4
GND Current IGND 10 15 µA MP2019GN, 0<ILOAD<1mA 4
GND Current IGND 15 21 µA MP2019GN, 1mA<ILOAD<30mA 4
GND Current IGND 65 95 µA MP2019GN, 30mA<ILOAD<300mA 4
Shutdown Supply Current IS 1 µA VEN=0V 4
Load Current Limit ILIMIT 600 1000 1350 mA VIN=7V, VOUT=0V 4
FB Voltage VFB 1.225 1.25 1.275 V MP2019GN, FB=OUT, ILOAD=5mA 4
Dropout Voltage VDROPOUT 200 400 mV MP2019GN, VOUT=5V, ILOAD=150mA 4
Dropout Voltage VDROPOUT 420 550 mV MP2019GN, VOUT=5V, ILOAD=300mA 4
FB Input Current IFB 50 nA MP2019GN, VFB=1.3V 4
Line Regulation -10 1 10 mV MP2019GN, VIN=3V to 40V, ILOAD=5mA, VOUT=VFB 4
Load Regulation 1 15 mV MP2019GN, ILOAD=5mA to 300mA, VOUT=5V 5
Start-Up Response Time 0.9 1.5 ms MP2019GN, RLOAD=500Ω, VOUT=5V, COUT=22µF, VOUT from 10% to 90% 5
EN Threshold Voltage Low VIL 0.3 V 5
EN Threshold Voltage High VIH 1.8 V 5
EN Input Current 0.1 0.5 μA EN=0V or 15V 5
PG Rising Threshold 89 93 97 % VFB MP2019GN 5
PG Low Voltage 0.1 0.4 V Sink 1mA Current 5
PG Leakage Current 1 µA VPG=5V 5
PGDL Charging Current 3 5.5 9 µA VPGDL=1V 5
PGDL Rising Threshold 1.4 1.7 2 V 5
PGDL Falling Threshold 0.2 0.4 0.7 V 5
PG Delay Time 5 10 15 ms CPGDL=47nF 5
PG Reaction Time 0.5 2 µs CPGDL=47nF 5
Supply Voltage VIN 3 40 V 3
Output Voltage VOUT 1.25 15 V 3
Operating Junction Temperature TJ -40 125 °C 3
IN, EN Voltage -0.3 42 V 3
OUT Voltage -0.3 17 V 3
PG Voltage -0.3 15 V 3
PGDL, FB Voltage -0.3 6 V 3
Junction Temperature TJ 150 °C 3
Lead Temperature 260 °C 3
Storage Temperature -65 150 °C 3
ESD HBM 4 kV Human Body Mode 3
ESD MM 200 V Machine Mode 3
Thermal Resistance Junction-Ambient θJA 50 °C/W SOIC-8 EP, JESD51-7 4-layer PCB 3
Thermal Resistance Junction-Case θJC 10 °C/W SOIC-8 EP, JESD51-7 4-layer PCB 3
Output Voltage PSRR 57 dB 100Hz, COUT=10μF, ILOAD=10mA 5
Output Voltage PSRR 45 dB 1kHz, COUT=10μF, ILOAD=10mA 5
Output Voltage PSRR 51 dB 100kHz, COUT=10μF, ILOAD=10mA 5
PG Rising Threshold Hysteresis 5 % VFB 5
Thermal Shutdown TSD 165 °C 5
Thermal Shutdown Hysteresis ΔTSD 30 °C 5

CAD (KiCad official)

  • Symbol: MP2019GN-Z
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: mp2019gn-z-etched.step / mp2019gn-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp2019gn-z.step / mp2019gn-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (16 pp, sha256 7c8144a7872a435c, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF