Generated by kicad-footprint-generator · KiCad file format 20260206
MP2019GN-Z
Monolithic Power Systems · Linear Voltage Regulators (LDO) · SOIC-8-EP
MP2019GN-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage (1.25V to 15V adjustable); only a low-value ceramic capacitor (≥0.47μF) on the output is required for stability. |
| 2 | NC | unconnected | No connection; do not connect. |
| 3 | GND | power_in | Ground; connect the exposed pad and GND to the same ground plane. |
| 4 | VIN | power_in | Input voltage; connect a 3V to 40V supply to VIN. |
| 5 | EN | input | Regulator on/off control input; logic low (<0.3V) shuts down the IC, logic high (>1.8V) starts it up, and EN can be connected to VIN for automatic start-up. |
| 6 | PG | output | Open-drain power-good output (pull up to VOUT or an external source below 15V through a resistor); can be left floating if not used. |
| 7 | PGDL | passive | Programmable power-good delay time set by a capacitor to ground; can be left floating if not used. |
| 8 | FB | input | Feedback input for the output-adjustable version; FB is regulated to 1.25V nominally and is used to set the output voltage via a resistor divider. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3 | 40 | V | 4 | ||
| Output-Voltage Range | VOUT | 1.25 | 15 | V | 4 | ||
| GND Current | IGND | 10 | 15 | µA | MP2019GN, 0<ILOAD<1mA | 4 | |
| GND Current | IGND | 15 | 21 | µA | MP2019GN, 1mA<ILOAD<30mA | 4 | |
| GND Current | IGND | 65 | 95 | µA | MP2019GN, 30mA<ILOAD<300mA | 4 | |
| Shutdown Supply Current | IS | 1 | µA | VEN=0V | 4 | ||
| Load Current Limit | ILIMIT | 600 | 1000 | 1350 | mA | VIN=7V, VOUT=0V | 4 |
| FB Voltage | VFB | 1.225 | 1.25 | 1.275 | V | MP2019GN, FB=OUT, ILOAD=5mA | 4 |
| Dropout Voltage | VDROPOUT | 200 | 400 | mV | MP2019GN, VOUT=5V, ILOAD=150mA | 4 | |
| Dropout Voltage | VDROPOUT | 420 | 550 | mV | MP2019GN, VOUT=5V, ILOAD=300mA | 4 | |
| FB Input Current | IFB | 50 | nA | MP2019GN, VFB=1.3V | 4 | ||
| Line Regulation | -10 | 1 | 10 | mV | MP2019GN, VIN=3V to 40V, ILOAD=5mA, VOUT=VFB | 4 | |
| Load Regulation | 1 | 15 | mV | MP2019GN, ILOAD=5mA to 300mA, VOUT=5V | 5 | ||
| Start-Up Response Time | 0.9 | 1.5 | ms | MP2019GN, RLOAD=500Ω, VOUT=5V, COUT=22µF, VOUT from 10% to 90% | 5 | ||
| EN Threshold Voltage Low | VIL | 0.3 | V | 5 | |||
| EN Threshold Voltage High | VIH | 1.8 | V | 5 | |||
| EN Input Current | 0.1 | 0.5 | μA | EN=0V or 15V | 5 | ||
| PG Rising Threshold | 89 | 93 | 97 | % VFB | MP2019GN | 5 | |
| PG Low Voltage | 0.1 | 0.4 | V | Sink 1mA Current | 5 | ||
| PG Leakage Current | 1 | µA | VPG=5V | 5 | |||
| PGDL Charging Current | 3 | 5.5 | 9 | µA | VPGDL=1V | 5 | |
| PGDL Rising Threshold | 1.4 | 1.7 | 2 | V | 5 | ||
| PGDL Falling Threshold | 0.2 | 0.4 | 0.7 | V | 5 | ||
| PG Delay Time | 5 | 10 | 15 | ms | CPGDL=47nF | 5 | |
| PG Reaction Time | 0.5 | 2 | µs | CPGDL=47nF | 5 | ||
| Supply Voltage | VIN | 3 | 40 | V | 3 | ||
| Output Voltage | VOUT | 1.25 | 15 | V | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| IN, EN Voltage | -0.3 | 42 | V | 3 | |||
| OUT Voltage | -0.3 | 17 | V | 3 | |||
| PG Voltage | -0.3 | 15 | V | 3 | |||
| PGDL, FB Voltage | -0.3 | 6 | V | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature | 260 | °C | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| ESD HBM | 4 | kV | Human Body Mode | 3 | |||
| ESD MM | 200 | V | Machine Mode | 3 | |||
| Thermal Resistance Junction-Ambient | θJA | 50 | °C/W | SOIC-8 EP, JESD51-7 4-layer PCB | 3 | ||
| Thermal Resistance Junction-Case | θJC | 10 | °C/W | SOIC-8 EP, JESD51-7 4-layer PCB | 3 | ||
| Output Voltage PSRR | 57 | dB | 100Hz, COUT=10μF, ILOAD=10mA | 5 | |||
| Output Voltage PSRR | 45 | dB | 1kHz, COUT=10μF, ILOAD=10mA | 5 | |||
| Output Voltage PSRR | 51 | dB | 100kHz, COUT=10μF, ILOAD=10mA | 5 | |||
| PG Rising Threshold Hysteresis | 5 | % VFB | 5 | ||||
| Thermal Shutdown | TSD | 165 | °C | 5 | |||
| Thermal Shutdown Hysteresis | ΔTSD | 30 | °C | 5 |
CAD (KiCad official)
- Symbol:
MP2019GN-Z - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mp2019gn-z-etched.step/mp2019gn-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp2019gn-z.step/mp2019gn-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (16 pp, sha256
7c8144a7872a435c, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).