3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTC1270ANMVCTTR
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
TC1270ANMVCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | VDD | power_in | Power supply voltage input that is also the monitored voltage, with a device operating range of 1.0V to 5.5V. |
| 3 | MR | input | Active-low manual reset input with an 18.5 kΩ typical internal pull-up that forces RST active when pulled low by a push button, with an input filter that ignores noise pulses. |
| 4 | RST | output | Open-drain active-low reset output that needs an external pull-up resistor and goes low when VDD falls below VTRIP, when MR is forced low, or during power-up, then floats after the Reset Delay Timer completes. |
| 5 | VSS | power_in | Ground terminal, which provides the negative reference for the analog input voltage and is typically circuit ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 2 | ||
| Supply Current (VDD > VTRIP) | IDD | 7 | 15 | µA | VDD > VTRIP, for L/M/R/S/T, VDD = 5.5V | 2 | |
| Supply Current (VDD < VTRIP) | IDD | 10 | 15 | µA | VDD < VTRIP, for L/M/R/S/T | 2 | |
| Reset Trip Point Threshold (TC127xAM) | VTRIP | 4.3 | 4.38 | 4.46 | V | TC127xAM: TA = +25°C | 2 |
| Reset Trip Point Threshold (TC127xAM) | VTRIP | 4.25 | 4.5 | V | TA = -40°C to +125°C | 2 | |
| MR Input High Threshold | VIH | 2.3 | V | VDD > VTRIP(MAX), L/M only | 3 | ||
| MR Input Low Threshold | VIL | 0.8 | V | VDD > VTRIP(MAX), L/M only | 3 | ||
| MR Pull-up Resistance | 10 | 18.5 | 40 | kΩ | 3 | ||
| Open-Drain High Voltage on Output | VODH | 13.5 | V | Open-Drain Output pin only. VDD = 3.0V, Time voltage > 5.5 applied ≤ 100s. Current into pin limited to 2 mA +25°C operation recommended | 3 | ||
| Reset Output Voltage Low | VOL | 0.4 | V | TC1270AN, L/M only, ISINK = 3.2 mA, VDD = VTRIP(MIN) | 3 | ||
| Reset Output Voltage Low | VOL | 0.3 | V | TC1270AN, L/M only, ISINK = 50 µA, VDD > 1.0V | 3 | ||
| Input Leakage Current | IIL | -1 | 1 | µA | VPIN = VDD | 3 | |
| Open-Drain RST Output Leakage | IOLOD | 1 | µA | Open-Drain configuration only. | 3 | ||
| Capacitive Loading Specification on Output Pins | CIO | 50 | pF | 3 | |||
| Reset Active Time Out Period | tRST | 140 | 280 | 560 | ms | TC127XAxVyy, VDD = VTRIP(MAX) | 5 |
| MR Minimum Pulse Width | tMR | 10 | µs | 5 | |||
| VDD to Reset Delay | tRD | 50 | µs | VDD = VTRIP(MAX) to VTRIP(MIN) -125 mV | 5 | ||
| MR Noise Immunity | tMRNI | 0.1 | µs | 5 | |||
| MR to Reset Propagation Delay | tMD | 0.2 | µs | 5 | |||
| Reset Threshold Tempco | 30 | ppm/°C | printed ±30 | 3 | |||
| Reset Trip Point Hysteresis | VHYS | 0.3 | % | Percentage of VTRIP Voltage | 3 | ||
| Supply Voltage (VDD to VSS) | 7 | V | 2 | ||||
| Input Current, VDD | 10 | mA | 2 | ||||
| Output Current, RESET, Reset | 10 | mA | 2 | ||||
| Voltage on all inputs and outputs w.r.t. VSS | -0.6 | V | -0.6V to (VDD + 1.0V) | 2 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 2 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Maximum Junction Temperature | TJ | -40 | 150 | °C | 6 | ||
| ESD protection, Human Body Model | 4 | kV | all pins | 2 | |||
| ESD protection, Machine Model | 400 | V | all pins | 2 | |||
| Thermal Resistance, 5L-SOT-23 | θJA | 256 | °C/W | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TC1270ANMVCTTR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tc1270anmvcttr-etched.step/tc1270anmvcttr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc1270anmvcttr.step/tc1270anmvcttr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
a7a52872905db044, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).