main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tc1270anmvcttr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tc1270anmvcttr-etched.glb tc1270anmvcttr: factory component page (tier=mfr) · Ray
tc1270anmvcttr-etched.step tc1270anmvcttr: factory component page (tier=mfr) · Ray
tc1270anmvcttr-hero.glb tc1270anmvcttr: hero GLB from the etched model (keeps the MPN mark) · Ray
tc1270anmvcttr-hero.overlay.json tc1270anmvcttr: hero GLB from the etched model (keeps the MPN mark) · Ray
tc1270anmvcttr.glb Publish 0.1.0 · Ray
tc1270anmvcttr.kicad_mod Publish 0.1.0 · Ray
tc1270anmvcttr.kicad_sym Publish 0.1.0 · Ray
tc1270anmvcttr.lbr Publish 0.1.0 · Ray
tc1270anmvcttr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TC1270ANMVCTTR

Microchip Tech · Monitors & Reset Circuits · SOT-23-5

TC1270ANMVCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 VDD power_in Power supply voltage input that is also the monitored voltage, with a device operating range of 1.0V to 5.5V.
3 MR input Active-low manual reset input with an 18.5 kΩ typical internal pull-up that forces RST active when pulled low by a push button, with an input filter that ignores noise pulses.
4 RST output Open-drain active-low reset output that needs an external pull-up resistor and goes low when VDD falls below VTRIP, when MR is forced low, or during power-up, then floats after the Reset Delay Timer completes.
5 VSS power_in Ground terminal, which provides the negative reference for the analog input voltage and is typically circuit ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 1 5.5 V 2
Supply Current (VDD > VTRIP) IDD 7 15 µA VDD > VTRIP, for L/M/R/S/T, VDD = 5.5V 2
Supply Current (VDD < VTRIP) IDD 10 15 µA VDD < VTRIP, for L/M/R/S/T 2
Reset Trip Point Threshold (TC127xAM) VTRIP 4.3 4.38 4.46 V TC127xAM: TA = +25°C 2
Reset Trip Point Threshold (TC127xAM) VTRIP 4.25 4.5 V TA = -40°C to +125°C 2
MR Input High Threshold VIH 2.3 V VDD > VTRIP(MAX), L/M only 3
MR Input Low Threshold VIL 0.8 V VDD > VTRIP(MAX), L/M only 3
MR Pull-up Resistance 10 18.5 40 kΩ 3
Open-Drain High Voltage on Output VODH 13.5 V Open-Drain Output pin only. VDD = 3.0V, Time voltage > 5.5 applied ≤ 100s. Current into pin limited to 2 mA +25°C operation recommended 3
Reset Output Voltage Low VOL 0.4 V TC1270AN, L/M only, ISINK = 3.2 mA, VDD = VTRIP(MIN) 3
Reset Output Voltage Low VOL 0.3 V TC1270AN, L/M only, ISINK = 50 µA, VDD > 1.0V 3
Input Leakage Current IIL -1 1 µA VPIN = VDD 3
Open-Drain RST Output Leakage IOLOD 1 µA Open-Drain configuration only. 3
Capacitive Loading Specification on Output Pins CIO 50 pF 3
Reset Active Time Out Period tRST 140 280 560 ms TC127XAxVyy, VDD = VTRIP(MAX) 5
MR Minimum Pulse Width tMR 10 µs 5
VDD to Reset Delay tRD 50 µs VDD = VTRIP(MAX) to VTRIP(MIN) -125 mV 5
MR Noise Immunity tMRNI 0.1 µs 5
MR to Reset Propagation Delay tMD 0.2 µs 5
Reset Threshold Tempco 30 ppm/°C printed ±30 3
Reset Trip Point Hysteresis VHYS 0.3 % Percentage of VTRIP Voltage 3
Supply Voltage (VDD to VSS) 7 V 2
Input Current, VDD 10 mA 2
Output Current, RESET, Reset 10 mA 2
Voltage on all inputs and outputs w.r.t. VSS -0.6 V -0.6V to (VDD + 1.0V) 2
Storage Temperature Range TS -65 150 °C 2
Operating Temperature Range TA -40 125 °C 6
Maximum Junction Temperature TJ -40 150 °C 6
ESD protection, Human Body Model 4 kV all pins 2
ESD protection, Machine Model 400 V all pins 2
Thermal Resistance, 5L-SOT-23 θJA 256 °C/W 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TC1270ANMVCTTR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tc1270anmvcttr-etched.step / tc1270anmvcttr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1270anmvcttr.step / tc1270anmvcttr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (46 pp, sha256 a7a52872905db044, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF