3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3225EEUP+T
Analog Devices Inc Maxim Integrated · RS232 ICs · TSSOP-20
MAX3225EEUP+T from Analog Devices Inc Maxim Integrated, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | READY | output | Ready to Transmit output, active-high, which is enabled high when V- goes below -4V and the device is ready to transmit. |
| 2 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor. |
| 3 | V+ | power_out | +5.5V generated by the charge pump. |
| 4 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 5 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 6 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 7 | V- | power_out | -5.5V generated by the charge pump. |
| 8 | T2OUT | output | RS-232 transmitter output, forced to high impedance when FORCEOFF is low or AutoShutdown Plus disables the transmitters, with T_OUT limited to ±13.2V to GND. |
| 9 | R2IN | input | RS-232 receiver input, rated to ±25V to GND. |
| 10 | R2OUT | output | TTL/CMOS receiver output, limited to -0.3V to (VCC + 0.3V) to GND. |
| 11 | INVALID | output | Valid signal detector output, active-low; a logic high indicates that a valid RS-232 level is present on a receiver input. |
| 12 | T2IN | input | TTL/CMOS transmitter input with no pullup resistor, so unused inputs must be connected to GND or VCC. |
| 13 | T1IN | input | TTL/CMOS transmitter input with no pullup resistor, so unused inputs must be connected to GND or VCC. |
| 14 | FORCEON | input | Force-On input, active-high, which overrides AutoShutdown Plus to keep transmitters and receivers on, provided FORCEOFF is high. |
| 15 | R1OUT | output | TTL/CMOS receiver output, limited to -0.3V to (VCC + 0.3V) to GND. |
| 16 | R1IN | input | RS-232 receiver input, rated to ±25V to GND. |
| 17 | T1OUT | output | RS-232 transmitter output, forced to high impedance when FORCEOFF is low or AutoShutdown Plus disables the transmitters, with T_OUT limited to ±13.2V to GND. |
| 18 | GND | power_in | Ground reference for the device. |
| 19 | VCC | power_in | Single supply voltage input, +3.0V to +5.5V. |
| 20 | FORCEOFF | input | Force-Off input, active-low; when low, transmitters are in high impedance, charge pumps are shut down, and receivers are active, overriding AutoShutdown Plus and FORCEON. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VCC (test condition range) | VCC | 3 | 5.5 | V | VCC = +3V to +5.5V (EC table header) | 6 | |
| Operating Temperature Range (MAX32__EE__) | -40 | 85 | °C | EE grade | 2 | ||
| VCC to GND | VCC | -0.3 | 6 | V | 2 | ||
| V+ to GND | V+ | -0.3 | 7 | V | Note 1 | 2 | |
| V- to GND | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ + /V-/ | 13 | V | Note 1 | 2 | |||
| Input voltages T_IN, FORCEON, FORCEOFF to GND | -0.3 | 6 | V | 2 | |||
| R_IN to GND | -25 | 25 | V | 2 | |||
| T_OUT to GND | -13.2 | 13.2 | V | 2 | |||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | soldering 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | reflow | 2 | |||
| Supply Current, AutoShutdown Plus | 1 | 10 | μA | FORCEON = GND, FORCEOFF = VCC, all R_IN idle, all T_IN idle; VCC = 3.3V or 5.0V, TA = +25°C | 6 | ||
| Supply Current, Shutdown | 1 | 10 | μA | FORCEOFF = GND; VCC = 3.3V or 5.0V, TA = +25°C | 6 | ||
| Supply Current, AutoShutdown Plus Disabled | 0.3 | 1 | mA | FORCEON = FORCEOFF = VCC, no load; VCC = 3.3V or 5.0V, TA = +25°C | 6 | ||
| Input Logic Threshold Low | 0.8 | V | T_IN, FORCEON, FORCEOFF | 6 | |||
| Input Logic Threshold High | 2 | V | T_IN, FORCEON, FORCEOFF; VCC = 3.3V | 6 | |||
| Input Logic Threshold High | 2.4 | V | T_IN, FORCEON, FORCEOFF; VCC = 5.0V | 6 | |||
| Input Leakage Current | -1 | 1 | μA | T_IN, FORCEON, FORCEOFF | 6 | ||
| Output Voltage Low | 0.4 | V | IOUT = 1.6mA | 6 | |||
| Receiver Input Voltage Range | -25 | 25 | V | 6 | |||
| Receiver Input Threshold Low | 0.6 | 1.2 | V | TA = +25°C; VCC = 3.3V | 6 | ||
| Receiver Input Threshold Low | 0.8 | 1.5 | V | TA = +25°C; VCC = 5.0V | 6 | ||
| Receiver Input Threshold High | 1.5 | 2.4 | V | TA = +25°C; VCC = 3.3V | 6 | ||
| Receiver Input Threshold High | 1.8 | 2.4 | V | TA = +25°C; VCC = 5.0V | 6 | ||
| Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C | 6 | |
| Output Voltage Swing | -5 | 5.4 | 5 | V | All transmitter outputs loaded with 3kΩ to ground | 6 | |
| Output Resistance (minimum) | 300 | Ω | VCC = V+ = V- = 0V, transmitter outputs = ±2V | 6 | |||
| Output Resistance (maximum) | 10 | MΩ | VCC = V+ = V- = 0V, transmitter outputs = ±2V | 6 | |||
| Output Short-Circuit Current | -60 | 60 | mA | 6 | |||
| Output Leakage Current (transmitter outputs) | -25 | 25 | μA | VCC = 0V or 3V to 5.5V, VOUT = ±12V, transmitters disabled | 6 | ||
| ESD IEC 1000-4-2 Air Discharge (R_IN, T_OUT) | -15 | 15 | kV | R_IN, T_OUT | 7 | ||
| ESD IEC 1000-4-2 Contact Discharge (R_IN, T_OUT) | -8 | 8 | kV | R_IN, T_OUT | 7 | ||
| ESD Human Body Model (R_IN, T_OUT) | -15 | 15 | kV | R_IN, T_OUT | 7 | ||
| Receiver Input Threshold to INVALID Output High, positive threshold | 2.7 | V | FORCEON = GND, FORCEOFF = VCC; Figure 4a | 7 | |||
| Receiver Input Threshold to INVALID Output High, negative threshold | -2.7 | V | FORCEON = GND, FORCEOFF = VCC; Figure 4a | 7 | |||
| Receiver Input Threshold to INVALID Output Low | -0.3 | 0.3 | V | FORCEON = GND, FORCEOFF = VCC; Figure 4a | 7 | ||
| INVALID, READY Output Voltage Low (MAX3224E-MAX3227E) | 0.4 | V | IOUT = -1.6mA | 7 | |||
| Receiver Positive or Negative Threshold to INVALID High | tINVH | 1 | μs | VCC = 5V, Figure 4b | 7 | ||
| Receiver Positive or Negative Threshold to INVALID Low | tINVL | 30 | μs | VCC = 5V, Figure 4b | 7 | ||
| Receiver or Transmitter Edge to Transmitters Enabled | tWU | 100 | μs | VCC = 5V, Figure 5b (Note 2) | 7 | ||
| Receiver or Transmitter Edge to Transmitters Shutdown | tAUTOSHDN | 15 | 30 | 60 | s | VCC = 5V, Figure 5b (Note 2) | 7 |
| Maximum Data Rate | 1000 | kbps | VCC = 3.0V to 4.5V, RL = 3kΩ, CL = 250pF, one transmitter switching | 8 | |||
| Transmitter Skew /tPHL - tPLH/ | 25 | ns | Note 3 | 8 | |||
| Receiver Skew /tPHL - tPLH/ | 50 | ns | 8 | ||||
| Transition-Region Slew Rate | 24 | 150 | V/μs | VCC = 3.3V, TA = +25°C, RL = 3kΩ to 7kΩ, CL = 150pF to 1000pF, one transmitter switching | 8 |
CAD (KiCad official)
- Symbol:
MAX3225EEUP+T - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
max3225eeup-t-etched.step/max3225eeup-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3225eeup-t.step/max3225eeup-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (25 pp, sha256
8542587c6f3a36a5, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).