Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP3992IMFX-1.5

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP3992IMFX-1.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply input; the datasheet specifies an input voltage range of 1.9 V to 5.2 V.
2 GND power_in Common ground; all voltages are referenced to the GND pin.
3 EN input Shutdown input that disables the regulator when at or below 0.4 V and enables it when at or above 1.15 V; the shutdown input voltage is rated 0 V to 6 V.
4 CAP passive Output capacitor connection, internally connected to VOUT and the recommended connection for the 1-µF output capacitor to ensure a stable output.
5 OUT power_out Voltage output that connects to the load circuit.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage -0.3 6.5 V All voltages with respect to GND 4
Output voltage 6.5 V Printed min is -0.3 to (VIN + 0.3) 4
Shutdown input voltage -0.3 6.5 V 4
Maximum power dissipation 568 mW 4
Junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage 1.9 5.2 V 4
Shutdown input voltage 0 6 V 4
Junction temperature -40 125 °C 4
Power dissipation 454 mW at 25°C 4
Line regulation error ΔVOUT -0.27 0.27 %/V VIN = (VOUT(NOM) + 1 V) to 5.2 V, IOUT = 1 mA 5
Output voltage tolerance -90 90 mV Over full line and load regulation. 5
Load regulation error 100 220 µV/mA IOUT = 1 mA to 30 mA 5
Input voltage VIN 1.9 5.2 mV TJ = 25°C 5
Load current ILOAD 0 µA See (2) and (3) 5
Quiescent current IQ 26 50 µA VEN = 1.15 V, IOUT = 0 mA 5
Quiescent current IQ 29 50 µA VEN = 1.15 V, IOUT = 30 mA 5
Quiescent current in shutdown IQ 0.003 1.5 µA VEN = 0.4 V 5
Short-circuit current limit ISC 90 mA See (4) 5
Power supply rejection ratio PSRR 40 dB f = 1 kHz, IOUT = 30 mA 5
Power supply rejection ratio PSRR 30 dB f = 20 kHz, IOUT = 30 mA 5
Output noise voltage EEN 300 µVRMS BW = 10 Hz to 100 kHz, VIN = 4.2 V 5
Thermal shutdown temperature TSHUTDOWN 160 °C 5
Thermal shutdown hysteresis 20 °C 5
Maximum input current at EN input IEN 0.001 µA VEN = 0 V and VIN = 5.2 V 5
Low input threshold VIL 0.4 V VIN = 1.8 V to 5.2 V 5
High input threshold VIH 1.15 V VIN = 1.8 V to 5.2 V 5
Line transient response /δVOUT/ 60 mV Trise = Tfall = 10 µS 5
Load transient response /δVOUT/ 60 mV IOUT = 100 µA to 5 mA 5
Turnon time, 50% to 85% of VOUT(NOM) tON1 15 µs 50% to 85% of VOUT(NOM) 5
Turnon time to 95% level tON2 40 µs Time from VEN = 1.15 V to VOUT = 95% VOUT(NOM) 5
Output capacitance COUT 0.7 1 µF 13
Output capacitor ESR ESR 5 500 mΩ 13
Junction-to-ambient thermal resistance RθJA 170.5 °C/W DBV (SOT-23) package 4
Junction-to-case (top) thermal resistance RθJC(top) 124.4 °C/W DBV (SOT-23) package 4
Junction-to-board thermal resistance RθJB 30.9 °C/W DBV (SOT-23) package 4
Junction-to-top characterization parameter ψJT 17.6 °C/W DBV (SOT-23) package 4
Junction-to-board characterization parameter ψJB 30.8 °C/W DBV (SOT-23) package 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper GND pin using as wide and as short a copper trace as is practical. 15

CAD (KiCad official)

  • Symbol: LP3992IMFX-1.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lp3992imfx-1-5-etched.step / lp3992imfx-1-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3992imfx-1-5.step / lp3992imfx-1-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 2e602c0064264ef8, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF