Generated by kicad-footprint-generator · KiCad file format 20260206
LP3992IMFX-1.5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3992IMFX-1.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply input; the datasheet specifies an input voltage range of 1.9 V to 5.2 V. |
| 2 | GND | power_in | Common ground; all voltages are referenced to the GND pin. |
| 3 | EN | input | Shutdown input that disables the regulator when at or below 0.4 V and enables it when at or above 1.15 V; the shutdown input voltage is rated 0 V to 6 V. |
| 4 | CAP | passive | Output capacitor connection, internally connected to VOUT and the recommended connection for the 1-µF output capacitor to ensure a stable output. |
| 5 | OUT | power_out | Voltage output that connects to the load circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | -0.3 | 6.5 | V | All voltages with respect to GND | 4 | ||
| Output voltage | 6.5 | V | Printed min is -0.3 to (VIN + 0.3) | 4 | |||
| Shutdown input voltage | -0.3 | 6.5 | V | 4 | |||
| Maximum power dissipation | 568 | mW | 4 | ||||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage | 1.9 | 5.2 | V | 4 | |||
| Shutdown input voltage | 0 | 6 | V | 4 | |||
| Junction temperature | -40 | 125 | °C | 4 | |||
| Power dissipation | 454 | mW | at 25°C | 4 | |||
| Line regulation error | ΔVOUT | -0.27 | 0.27 | %/V | VIN = (VOUT(NOM) + 1 V) to 5.2 V, IOUT = 1 mA | 5 | |
| Output voltage tolerance | -90 | 90 | mV | Over full line and load regulation. | 5 | ||
| Load regulation error | 100 | 220 | µV/mA | IOUT = 1 mA to 30 mA | 5 | ||
| Input voltage | VIN | 1.9 | 5.2 | mV | TJ = 25°C | 5 | |
| Load current | ILOAD | 0 | µA | See (2) and (3) | 5 | ||
| Quiescent current | IQ | 26 | 50 | µA | VEN = 1.15 V, IOUT = 0 mA | 5 | |
| Quiescent current | IQ | 29 | 50 | µA | VEN = 1.15 V, IOUT = 30 mA | 5 | |
| Quiescent current in shutdown | IQ | 0.003 | 1.5 | µA | VEN = 0.4 V | 5 | |
| Short-circuit current limit | ISC | 90 | mA | See (4) | 5 | ||
| Power supply rejection ratio | PSRR | 40 | dB | f = 1 kHz, IOUT = 30 mA | 5 | ||
| Power supply rejection ratio | PSRR | 30 | dB | f = 20 kHz, IOUT = 30 mA | 5 | ||
| Output noise voltage | EEN | 300 | µVRMS | BW = 10 Hz to 100 kHz, VIN = 4.2 V | 5 | ||
| Thermal shutdown temperature | TSHUTDOWN | 160 | °C | 5 | |||
| Thermal shutdown hysteresis | 20 | °C | 5 | ||||
| Maximum input current at EN input | IEN | 0.001 | µA | VEN = 0 V and VIN = 5.2 V | 5 | ||
| Low input threshold | VIL | 0.4 | V | VIN = 1.8 V to 5.2 V | 5 | ||
| High input threshold | VIH | 1.15 | V | VIN = 1.8 V to 5.2 V | 5 | ||
| Line transient response | /δVOUT/ | 60 | mV | Trise = Tfall = 10 µS | 5 | ||
| Load transient response | /δVOUT/ | 60 | mV | IOUT = 100 µA to 5 mA | 5 | ||
| Turnon time, 50% to 85% of VOUT(NOM) | tON1 | 15 | µs | 50% to 85% of VOUT(NOM) | 5 | ||
| Turnon time to 95% level | tON2 | 40 | µs | Time from VEN = 1.15 V to VOUT = 95% VOUT(NOM) | 5 | ||
| Output capacitance | COUT | 0.7 | 1 | µF | 13 | ||
| Output capacitor ESR | ESR | 5 | 500 | mΩ | 13 | ||
| Junction-to-ambient thermal resistance | RθJA | 170.5 | °C/W | DBV (SOT-23) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 124.4 | °C/W | DBV (SOT-23) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 30.9 | °C/W | DBV (SOT-23) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 17.6 | °C/W | DBV (SOT-23) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 30.8 | °C/W | DBV (SOT-23) package | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | GND pin using as wide and as short a copper trace as is practical. | 15 |
CAD (KiCad official)
- Symbol:
LP3992IMFX-1.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lp3992imfx-1-5-etched.step/lp3992imfx-1-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3992imfx-1-5.step/lp3992imfx-1-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
2e602c0064264ef8, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).