Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA4990SIRTER

Texas Instruments · Operational Amplifier · WQFN-16(3x3)

OPA4990SIRTER from Texas Instruments, in a WQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1+ input Noninverting input, channel 1; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
2 VCC+ power_in Positive (highest) power supply; the device is specified for a supply of 2.7 V to 40 V, with an absolute maximum of 42 V.
3 IN2+ input Noninverting input, channel 2; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
4 IN2- input Inverting input, channel 2; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
5 OUT2 output Output, channel 2; enters a high-impedance state when its shutdown control is high.
6 SHDN12 input Shutdown for channels 1 and 2: low = amplifiers enabled, high = amplifiers disabled; a valid logic high is V- + 1.1 V to V- + 20 V and must not exceed V+.
7 SHDN34 input Shutdown for channels 3 and 4: low = amplifiers enabled, high = amplifiers disabled; a valid logic high is V- + 1.1 V to V- + 20 V and must not exceed V+.
8 OUT3 output Output, channel 3; enters a high-impedance state when its shutdown control is high.
9 IN3- input Inverting input, channel 3; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
10 IN3+ input Noninverting input, channel 3; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
11 VCC- power_in Negative (lowest) power supply; the reference rail for the shutdown pins and the input and output ranges.
12 IN4+ input Noninverting input, channel 4; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
13 IN4- input Inverting input, channel 4; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
14 OUT4 output Output, channel 4; enters a high-impedance state when its shutdown control is high.
15 OUT1 output Output, channel 1; enters a high-impedance state when its shutdown control is high.
16 IN1- input Inverting input, channel 1; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V.
17 PAD passive Exposed thermal pad: connect to V- or leave floating; attaching it to any other potential is not allowed and device performance is not assured.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16(3x3)
Category Amplifiers/Comparators
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -1.5 0.3 1.5 mV VCM = V- 13
Input offset voltage over temperature VOS -1.75 1.75 mV TA = -40°C to 125°C 13
Input offset voltage vs power supply PSRR -1.3 0.1 1.3 µV/V VCM = V-, VS = 4 V to 40 V, TA = -40°C to 125°C 13
Input offset voltage vs power supply (2.7 V) PSRR -6.6 0.75 6.6 µV/V VCM = V-, VS = 2.7 V to 40 V 13
Common-mode rejection ratio (PMOS pair, 40 V) CMRR 100 115 dB VS = 40 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair), TA = -40°C to 125°C 13
Common-mode rejection ratio (PMOS pair, 4 V) CMRR 75 90 dB VS = 4 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair) 13
Common-mode rejection ratio (PMOS pair, 2.7 V) CMRR 70 90 dB VS = 2.7 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair) 13
Common-mode rejection ratio (NMOS pair) CMRR 80 dB VS = 2.7, 40 V, (V+), 1 V < VCM < (V+) + 0.1 V (NMOS pair) 13
Open-loop voltage gain (40 V) AOL 120 145 dB VS = 40 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V 14
Open-loop voltage gain over temperature (40 V) AOL 142 dB VS = 40 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C 14
Open-loop voltage gain (4 V) AOL 104 130 dB VS = 4 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V 14
Open-loop voltage gain over temperature (4 V) AOL 125 dB VS = 4 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C 14
Open-loop voltage gain (2.7 V) AOL 101 118 dB VS = 2.7 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V 14
Open-loop voltage gain over temperature (2.7 V) AOL 117 dB VS = 2.7 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C 14
Voltage output swing from rail (RL = 10 kΩ, 40 V) 45 60 mV VS = 40 V, RL = 10 kΩ 14
Voltage output swing from rail (RL = 2 kΩ, 40 V) 200 300 mV VS = 40 V, RL = 2 kΩ 14
Voltage output swing from rail (RL = 10 kΩ, 2.7 V) 5 20 mV VS = 2.7 V, RL = 10 kΩ 14
Voltage output swing from rail (RL = 2 kΩ, 2.7 V) 25 50 mV VS = 2.7 V, RL = 2 kΩ 14
Short-circuit current ISC -80 80 mA 14
Quiescent current per amplifier IQ 120 150 µA OPA2990, OPA4990, IO = 0 A 15
Quiescent current per amplifier over temperature IQ 160 µA OPA2990, OPA4990, IO = 0 A, TA = -40°C to 125°C 15
Quiescent current per amplifier in shutdown IQSD 20 30 µA VS = 2.7 V to 40 V, all amplifiers disabled, SHDN = V- + 2 V 15
SHDN pin input bias current (high range) 500 nA VS = 2.7 V to 40 V, (V-) + 20 V ≥ SHDN ≥ (V-) + 0.9 V 15
SHDN pin input bias current (low range) 150 nA VS = 2.7 V to 40 V, (V-) ≤ SHDN ≤ (V-) + 0.7 V 15
Supply voltage, VS = (V+), (V-) VS 0 42 V 10
Signal input pins current -10 10 mA 10
Operating ambient temperature TA -55 150 °C 10
Junction temperature TJ 150 °C 10
Storage temperature Tstg -65 150 °C 10
Electrostatic discharge, human body model (HBM) V(ESD) -2000 2000 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 10
Electrostatic discharge, charged device model (CDM) V(ESD) -1000 1000 V Charged device model (CDM), per JEDEC JESD22-C101 10
Supply voltage VS 2.7 40 V 10
Specified temperature TA -40 125 °C 10
Junction-to-ambient thermal resistance (RTE WQFN-16) RθJA 53.5 °C/W Quad channel, RTE (WQFN) 16-pin package 12
Junction-to-case (top) thermal resistance (RTE WQFN-16) RθJC(top) 58.3 °C/W Quad channel, RTE (WQFN) 16-pin package 12
Junction-to-board thermal resistance (RTE WQFN-16) RθJB 28.6 °C/W Quad channel, RTE (WQFN) 16-pin package 12
Junction-to-top characterization parameter (RTE WQFN-16) ψJT 2.1 °C/W Quad channel, RTE (WQFN) 16-pin package 12
Junction-to-board characterization parameter (RTE WQFN-16) ψJB 28.6 °C/W Quad channel, RTE (WQFN) 16-pin package 12
Junction-to-case (bottom) thermal resistance (RTE WQFN-16) RθJC(bot) 12.6 °C/W Quad channel, RTE (WQFN) 16-pin package 12

CAD (KiCad official)

  • Symbol: OPA4990SIRTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: opa4990sirter-etched.step / opa4990sirter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa4990sirter.step / opa4990sirter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (94 pp, sha256 e1ac1e385a72515b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF