3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA4990SIRTER
Texas Instruments · Operational Amplifier · WQFN-16(3x3)
OPA4990SIRTER from Texas Instruments, in a WQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1+ | input | Noninverting input, channel 1; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 2 | VCC+ | power_in | Positive (highest) power supply; the device is specified for a supply of 2.7 V to 40 V, with an absolute maximum of 42 V. |
| 3 | IN2+ | input | Noninverting input, channel 2; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 4 | IN2- | input | Inverting input, channel 2; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 5 | OUT2 | output | Output, channel 2; enters a high-impedance state when its shutdown control is high. |
| 6 | SHDN12 | input | Shutdown for channels 1 and 2: low = amplifiers enabled, high = amplifiers disabled; a valid logic high is V- + 1.1 V to V- + 20 V and must not exceed V+. |
| 7 | SHDN34 | input | Shutdown for channels 3 and 4: low = amplifiers enabled, high = amplifiers disabled; a valid logic high is V- + 1.1 V to V- + 20 V and must not exceed V+. |
| 8 | OUT3 | output | Output, channel 3; enters a high-impedance state when its shutdown control is high. |
| 9 | IN3- | input | Inverting input, channel 3; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 10 | IN3+ | input | Noninverting input, channel 3; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 11 | VCC- | power_in | Negative (lowest) power supply; the reference rail for the shutdown pins and the input and output ranges. |
| 12 | IN4+ | input | Noninverting input, channel 4; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 13 | IN4- | input | Inverting input, channel 4; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 14 | OUT4 | output | Output, channel 4; enters a high-impedance state when its shutdown control is high. |
| 15 | OUT1 | output | Output, channel 1; enters a high-impedance state when its shutdown control is high. |
| 16 | IN1- | input | Inverting input, channel 1; input voltage must stay within (V-) - 0.2 V to (V+) + 0.2 V. |
| 17 | PAD | passive | Exposed thermal pad: connect to V- or leave floating; attaching it to any other potential is not allowed and device performance is not assured. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -1.5 | 0.3 | 1.5 | mV | VCM = V- | 13 |
| Input offset voltage over temperature | VOS | -1.75 | 1.75 | mV | TA = -40°C to 125°C | 13 | |
| Input offset voltage vs power supply | PSRR | -1.3 | 0.1 | 1.3 | µV/V | VCM = V-, VS = 4 V to 40 V, TA = -40°C to 125°C | 13 |
| Input offset voltage vs power supply (2.7 V) | PSRR | -6.6 | 0.75 | 6.6 | µV/V | VCM = V-, VS = 2.7 V to 40 V | 13 |
| Common-mode rejection ratio (PMOS pair, 40 V) | CMRR | 100 | 115 | dB | VS = 40 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair), TA = -40°C to 125°C | 13 | |
| Common-mode rejection ratio (PMOS pair, 4 V) | CMRR | 75 | 90 | dB | VS = 4 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair) | 13 | |
| Common-mode rejection ratio (PMOS pair, 2.7 V) | CMRR | 70 | 90 | dB | VS = 2.7 V, (V-), 0.1 V < VCM < (V+), 2 V (PMOS pair) | 13 | |
| Common-mode rejection ratio (NMOS pair) | CMRR | 80 | dB | VS = 2.7, 40 V, (V+), 1 V < VCM < (V+) + 0.1 V (NMOS pair) | 13 | ||
| Open-loop voltage gain (40 V) | AOL | 120 | 145 | dB | VS = 40 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V | 14 | |
| Open-loop voltage gain over temperature (40 V) | AOL | 142 | dB | VS = 40 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C | 14 | ||
| Open-loop voltage gain (4 V) | AOL | 104 | 130 | dB | VS = 4 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V | 14 | |
| Open-loop voltage gain over temperature (4 V) | AOL | 125 | dB | VS = 4 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C | 14 | ||
| Open-loop voltage gain (2.7 V) | AOL | 101 | 118 | dB | VS = 2.7 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V | 14 | |
| Open-loop voltage gain over temperature (2.7 V) | AOL | 117 | dB | VS = 2.7 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C | 14 | ||
| Voltage output swing from rail (RL = 10 kΩ, 40 V) | 45 | 60 | mV | VS = 40 V, RL = 10 kΩ | 14 | ||
| Voltage output swing from rail (RL = 2 kΩ, 40 V) | 200 | 300 | mV | VS = 40 V, RL = 2 kΩ | 14 | ||
| Voltage output swing from rail (RL = 10 kΩ, 2.7 V) | 5 | 20 | mV | VS = 2.7 V, RL = 10 kΩ | 14 | ||
| Voltage output swing from rail (RL = 2 kΩ, 2.7 V) | 25 | 50 | mV | VS = 2.7 V, RL = 2 kΩ | 14 | ||
| Short-circuit current | ISC | -80 | 80 | mA | 14 | ||
| Quiescent current per amplifier | IQ | 120 | 150 | µA | OPA2990, OPA4990, IO = 0 A | 15 | |
| Quiescent current per amplifier over temperature | IQ | 160 | µA | OPA2990, OPA4990, IO = 0 A, TA = -40°C to 125°C | 15 | ||
| Quiescent current per amplifier in shutdown | IQSD | 20 | 30 | µA | VS = 2.7 V to 40 V, all amplifiers disabled, SHDN = V- + 2 V | 15 | |
| SHDN pin input bias current (high range) | 500 | nA | VS = 2.7 V to 40 V, (V-) + 20 V ≥ SHDN ≥ (V-) + 0.9 V | 15 | |||
| SHDN pin input bias current (low range) | 150 | nA | VS = 2.7 V to 40 V, (V-) ≤ SHDN ≤ (V-) + 0.7 V | 15 | |||
| Supply voltage, VS = (V+), (V-) | VS | 0 | 42 | V | 10 | ||
| Signal input pins current | -10 | 10 | mA | 10 | |||
| Operating ambient temperature | TA | -55 | 150 | °C | 10 | ||
| Junction temperature | TJ | 150 | °C | 10 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 10 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -2000 | 2000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 10 | |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | -1000 | 1000 | V | Charged device model (CDM), per JEDEC JESD22-C101 | 10 | |
| Supply voltage | VS | 2.7 | 40 | V | 10 | ||
| Specified temperature | TA | -40 | 125 | °C | 10 | ||
| Junction-to-ambient thermal resistance (RTE WQFN-16) | RθJA | 53.5 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 | ||
| Junction-to-case (top) thermal resistance (RTE WQFN-16) | RθJC(top) | 58.3 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 | ||
| Junction-to-board thermal resistance (RTE WQFN-16) | RθJB | 28.6 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 | ||
| Junction-to-top characterization parameter (RTE WQFN-16) | ψJT | 2.1 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 | ||
| Junction-to-board characterization parameter (RTE WQFN-16) | ψJB | 28.6 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 | ||
| Junction-to-case (bottom) thermal resistance (RTE WQFN-16) | RθJC(bot) | 12.6 | °C/W | Quad channel, RTE (WQFN) 16-pin package | 12 |
CAD (KiCad official)
- Symbol:
OPA4990SIRTER - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: WQFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
opa4990sirter-etched.step/opa4990sirter-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa4990sirter.step/opa4990sirter.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (94 pp, sha256
e1ac1e385a72515b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).