Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3080EST#WPBF

Analog Devices · Linear Voltage Regulators (LDO) · SOT-223-3

LT3080EST#WPBF from Analog Devices, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SET input Error amplifier input and regulation set point; a fixed 10µA flows out of this pin through a single external resistor to program VOUT (zero to the maximum rated output voltage), with an optional small capacitor to ground to improve transient performance.
2 OUT power_out Power output of the device; a minimum load current of 1mA is required or the output may not regulate, and the tab is also connected to OUT.
3 IN power_in Collector of the power device and supply for the output load current, with VCONTROL and IN tied together internally on the SOT-223; absolute maximum 40V, and the voltage must exceed VOUT by the dropout voltage to regulate.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-223-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SET Pin Current ISET 9.9 10 10.1 µA VIN = 1V, VCONTROL = 2.0V, ILOAD = 1mA, TJ = 25°C 4
SET Pin Current (full range) ISET 9.8 10 10.2 µA VIN ≥ 1V, VCONTROL ≥ 2.0V, 1mA ≤ ILOAD ≤ 1.1A 4
Output Offset Voltage (SOT-223) VOS -5 5 mV VIN = 1V, VCONTROL = 2V, IOUT = 1mA 4
Output Offset Voltage (SOT-223, full range) VOS -6 6 mV VIN = 1V, VCONTROL = 2V, IOUT = 1mA, over full temperature range 4
Load Regulation ISET ΔISET -0.1 nA ΔILOAD = 1mA to 1.1A 4
Load Regulation VOS ΔVOS 0.6 1.3 mV ΔILOAD = 1mA to 1.1A (Note 8) 4
Line Regulation ISET ΔISET 0.1 0.5 nA/V VIN = 1V to 26V, VCONTROL = 2V to 26V, ILOAD = 1mA 4
Line Regulation VOS ΔVOS 0.003 mV/V VIN = 1V to 26V, VCONTROL = 2V to 26V, ILOAD = 1mA 4
Minimum Load Current 300 500 µA VIN = VCONTROL = 10V 4
Minimum Load Current 1 mA VIN = VCONTROL = 26V (SOT-223, DD-Pak and T0-220 Package) 4
VCONTROL Dropout Voltage 1.2 V ILOAD = 100mA 4
VCONTROL Dropout Voltage 1.35 1.6 V ILOAD = 1.1A 4
VIN Dropout Voltage 100 200 mV ILOAD = 100mA 4
VIN Dropout Voltage 350 500 mV ILOAD = 1.1A 4
VCONTROL Pin Current 4 6 mA ILOAD = 100mA 4
VCONTROL Pin Current 17 30 mA ILOAD = 1.1A 4
Current Limit 1.1 1.4 A VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V 4
Error Amplifier RMS Output Noise 40 µVRMS ILOAD = 1.1A, 10Hz ≤ f ≤ 100kHz, COUT = 10µF, CSET = 0.1µF 4
Reference Current RMS Output Noise 1 nARMS 10Hz ≤ f ≤ 100kHz 4
Ripple Rejection 75 dB f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.2A, CSET = 0.1µF, COUT = 2.2µF 4
Ripple Rejection 55 dB f = 10kHz 4
Ripple Rejection 20 dB f = 1MHz 4
Thermal Regulation, ISET 0.003 %/W 10ms Pulse 4
VCONTROL Pin Voltage VCONTROL -0.3 40 V Relative to VOUT 2
IN Pin Voltage VIN -0.3 40 V Relative to VOUT 2
SET Pin Current ISET -10 10 mA Note 7 2
SET Pin Voltage VSET -0.3 0.3 V Relative to OUT 2
Operating Junction Temperature Range TJ -40 125 °C E-, I-Grade (Notes 2, 10) 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 125 °C ST package 2
Thermal Resistance Junction-to-Ambient θJA 55 °C/W ST package, SOT-223 2
Thermal Resistance Junction-to-Case θJC 15 °C/W ST package, SOT-223 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 2. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE 14

CAD (KiCad official)

  • Symbol: LT3080EST#WPBF
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-3 (KiCad packages3D, STEP)
  • 3D model files: lt3080est-wpbf-etched.step / lt3080est-wpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3080est-wpbf.step / lt3080est-wpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 c548d356f315706f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF