3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT3080EST#WPBF
Analog Devices · Linear Voltage Regulators (LDO) · SOT-223-3
LT3080EST#WPBF from Analog Devices, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SET | input | Error amplifier input and regulation set point; a fixed 10µA flows out of this pin through a single external resistor to program VOUT (zero to the maximum rated output voltage), with an optional small capacitor to ground to improve transient performance. |
| 2 | OUT | power_out | Power output of the device; a minimum load current of 1mA is required or the output may not regulate, and the tab is also connected to OUT. |
| 3 | IN | power_in | Collector of the power device and supply for the output load current, with VCONTROL and IN tied together internally on the SOT-223; absolute maximum 40V, and the voltage must exceed VOUT by the dropout voltage to regulate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current | ISET | 9.9 | 10 | 10.1 | µA | VIN = 1V, VCONTROL = 2.0V, ILOAD = 1mA, TJ = 25°C | 4 |
| SET Pin Current (full range) | ISET | 9.8 | 10 | 10.2 | µA | VIN ≥ 1V, VCONTROL ≥ 2.0V, 1mA ≤ ILOAD ≤ 1.1A | 4 |
| Output Offset Voltage (SOT-223) | VOS | -5 | 5 | mV | VIN = 1V, VCONTROL = 2V, IOUT = 1mA | 4 | |
| Output Offset Voltage (SOT-223, full range) | VOS | -6 | 6 | mV | VIN = 1V, VCONTROL = 2V, IOUT = 1mA, over full temperature range | 4 | |
| Load Regulation ISET | ΔISET | -0.1 | nA | ΔILOAD = 1mA to 1.1A | 4 | ||
| Load Regulation VOS | ΔVOS | 0.6 | 1.3 | mV | ΔILOAD = 1mA to 1.1A (Note 8) | 4 | |
| Line Regulation ISET | ΔISET | 0.1 | 0.5 | nA/V | VIN = 1V to 26V, VCONTROL = 2V to 26V, ILOAD = 1mA | 4 | |
| Line Regulation VOS | ΔVOS | 0.003 | mV/V | VIN = 1V to 26V, VCONTROL = 2V to 26V, ILOAD = 1mA | 4 | ||
| Minimum Load Current | 300 | 500 | µA | VIN = VCONTROL = 10V | 4 | ||
| Minimum Load Current | 1 | mA | VIN = VCONTROL = 26V (SOT-223, DD-Pak and T0-220 Package) | 4 | |||
| VCONTROL Dropout Voltage | 1.2 | V | ILOAD = 100mA | 4 | |||
| VCONTROL Dropout Voltage | 1.35 | 1.6 | V | ILOAD = 1.1A | 4 | ||
| VIN Dropout Voltage | 100 | 200 | mV | ILOAD = 100mA | 4 | ||
| VIN Dropout Voltage | 350 | 500 | mV | ILOAD = 1.1A | 4 | ||
| VCONTROL Pin Current | 4 | 6 | mA | ILOAD = 100mA | 4 | ||
| VCONTROL Pin Current | 17 | 30 | mA | ILOAD = 1.1A | 4 | ||
| Current Limit | 1.1 | 1.4 | A | VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V | 4 | ||
| Error Amplifier RMS Output Noise | 40 | µVRMS | ILOAD = 1.1A, 10Hz ≤ f ≤ 100kHz, COUT = 10µF, CSET = 0.1µF | 4 | |||
| Reference Current RMS Output Noise | 1 | nARMS | 10Hz ≤ f ≤ 100kHz | 4 | |||
| Ripple Rejection | 75 | dB | f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.2A, CSET = 0.1µF, COUT = 2.2µF | 4 | |||
| Ripple Rejection | 55 | dB | f = 10kHz | 4 | |||
| Ripple Rejection | 20 | dB | f = 1MHz | 4 | |||
| Thermal Regulation, ISET | 0.003 | %/W | 10ms Pulse | 4 | |||
| VCONTROL Pin Voltage | VCONTROL | -0.3 | 40 | V | Relative to VOUT | 2 | |
| IN Pin Voltage | VIN | -0.3 | 40 | V | Relative to VOUT | 2 | |
| SET Pin Current | ISET | -10 | 10 | mA | Note 7 | 2 | |
| SET Pin Voltage | VSET | -0.3 | 0.3 | V | Relative to OUT | 2 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | E-, I-Grade (Notes 2, 10) | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | ST package | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 55 | °C/W | ST package, SOT-223 | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 15 | °C/W | ST package, SOT-223 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | COPPER | Table 2. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE | 14 |
CAD (KiCad official)
- Symbol:
LT3080EST#WPBF - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
lt3080est-wpbf-etched.step/lt3080est-wpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3080est-wpbf.step/lt3080est-wpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
c548d356f315706f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).