Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2889ID

Texas Instruments · Operational Amplifier · SOIC-8

OPA2889ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Channel A output, able to deliver a ±4V swing with over 40mA drive on ±5V supplies.
2 -In A input Channel A inverting input; input voltage range is limited to ±VS.
3 +In A input Channel A non-inverting input; common-mode input range is ±3.9V typical at ±5V supplies.
4 -VS power_in Negative supply, dual supplies from ±1.3V to ±6V (absolute maximum ±6.5V), or ground for single-supply operation.
5 +In B input Channel B non-inverting input; common-mode input range is ±3.9V typical at ±5V supplies.
6 -In B input Channel B inverting input; input voltage range is limited to ±VS.
7 Out B output Channel B output, able to deliver a ±4V swing with over 40mA drive on ±5V supplies.
8 +VS power_in Positive supply, single supply from +2.6V to +12V or dual supplies from ±1.3V to ±6V (absolute maximum ±6.5V total power supply).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Small-Signal Bandwidth 32 60 MHz G = +2V/V, VO = 100mVPP 3
Small-Signal Bandwidth 4.5 8 MHz G = +10V/V, VO = 100mVPP 3
Gain Bandwidth Product 45 75 MHz G > +20V/V 3
Slew Rate 150 250 V/µs G = +2V/V, VO = 2V Step 3
2nd-Harmonic Distortion -75 -60 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 3
2nd-Harmonic Distortion -80 -65 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 3
3rd-Harmonic Distortion -80 -68 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω 3
3rd-Harmonic Distortion -82 -72 dBc G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω 3
Input Voltage Noise 8.4 12 nV/√Hz f > 100kHz 3
Input Current Noise 0.7 1.4 pA/√Hz f > 100kHz 3
Open-Loop Voltage Gain (AOL) AOL 57 66 dB VO = 0V, RL = 100Ω 3
Input Offset Voltage 1.5 6.3 mV VCM = 0V 3
Average Offset Voltage Drift 20 µV/°C VCM = 0V 3
Input Bias Current IB 150 880 nA VCM = 0V 3
Average Input Bias Current Drift 2 nA/°C VCM = 0V 3
Input Offset Current IOS 50 235 nA VCM = 0V 3
Average Input Offset Current Drift 0.5 nA/°C VCM = 0V 3
Common-Mode Input Range (CMIR) 3.6 3.9 V 3
Common-Mode Rejection Ratio (CMRR) 58 70 dB VCM = 0V, Input-referred 3
Output Voltage Swing 3.7 4 V No load 4
Output Voltage Swing 2.85 3.3 V RL = 100Ω 4
Output Current, Sourcing, Sinking 22 40 mA VO = 0V 4
Maximum Operating Voltage 6 V 4
Maximum Quiescent Current 0.92 1.1 mA VS = ±5V, Both channels 4
Minimum Quiescent Current 0.7 0.92 mA VS = ±5V, Both channels 4
Power-Supply Rejection Ratio (+PSRR) +PSRR 60 64 dB +VS = 4.5V to 5.5V 4
Power-Supply Rejection Ratio (-PSRR) -PSRR 70 74 dB –VS = –4.5V to –5.5V 4
Power supply 6.5 V 2
Storage temperature range -65 125 °C 2
Lead temperature (soldering, 10s) 260 °C soldering, 10s 2
Maximum junction temperature TJ 150 °C 2
Maximum junction temperature, continuous operation TJ 140 °C continuous operation 2
ESD rating, Human body model (HBM) 2000 V Human body model (HBM) 2
ESD rating, Charge device model (CDM) 1000 V Charge device model (CDM) 2
ESD rating, Machine model (MM) 150 V Machine model (MM) 2
Specified operating free-air temperature range -40 85 °C D and DGS packages 4
Thermal resistance, junction-to-ambient (SO-8) θJA 100 °C/W Junction-to-ambient, D SO-8 package 4

CAD (KiCad official)

  • Symbol: OPA2889ID
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa2889id-etched.step / opa2889id-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2889id.step / opa2889id.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 6f5b4f0047138a48, retrieved 2026-10-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF