3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2889ID
Texas Instruments · Operational Amplifier · SOIC-8
OPA2889ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Channel A output, able to deliver a ±4V swing with over 40mA drive on ±5V supplies. |
| 2 | -In A | input | Channel A inverting input; input voltage range is limited to ±VS. |
| 3 | +In A | input | Channel A non-inverting input; common-mode input range is ±3.9V typical at ±5V supplies. |
| 4 | -VS | power_in | Negative supply, dual supplies from ±1.3V to ±6V (absolute maximum ±6.5V), or ground for single-supply operation. |
| 5 | +In B | input | Channel B non-inverting input; common-mode input range is ±3.9V typical at ±5V supplies. |
| 6 | -In B | input | Channel B inverting input; input voltage range is limited to ±VS. |
| 7 | Out B | output | Channel B output, able to deliver a ±4V swing with over 40mA drive on ±5V supplies. |
| 8 | +VS | power_in | Positive supply, single supply from +2.6V to +12V or dual supplies from ±1.3V to ±6V (absolute maximum ±6.5V total power supply). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth | 32 | 60 | MHz | G = +2V/V, VO = 100mVPP | 3 | ||
| Small-Signal Bandwidth | 4.5 | 8 | MHz | G = +10V/V, VO = 100mVPP | 3 | ||
| Gain Bandwidth Product | 45 | 75 | MHz | G > +20V/V | 3 | ||
| Slew Rate | 150 | 250 | V/µs | G = +2V/V, VO = 2V Step | 3 | ||
| 2nd-Harmonic Distortion | -75 | -60 | dBc | G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω | 3 | ||
| 2nd-Harmonic Distortion | -80 | -65 | dBc | G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| 3rd-Harmonic Distortion | -80 | -68 | dBc | G = +2V/V, f = 1MHz, VO = 2VPP, RL = 200Ω | 3 | ||
| 3rd-Harmonic Distortion | -82 | -72 | dBc | G = +2V/V, f = 1MHz, VO = 2VPP, RL ≥ 500Ω | 3 | ||
| Input Voltage Noise | 8.4 | 12 | nV/√Hz | f > 100kHz | 3 | ||
| Input Current Noise | 0.7 | 1.4 | pA/√Hz | f > 100kHz | 3 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 57 | 66 | dB | VO = 0V, RL = 100Ω | 3 | |
| Input Offset Voltage | 1.5 | 6.3 | mV | VCM = 0V | 3 | ||
| Average Offset Voltage Drift | 20 | µV/°C | VCM = 0V | 3 | |||
| Input Bias Current | IB | 150 | 880 | nA | VCM = 0V | 3 | |
| Average Input Bias Current Drift | 2 | nA/°C | VCM = 0V | 3 | |||
| Input Offset Current | IOS | 50 | 235 | nA | VCM = 0V | 3 | |
| Average Input Offset Current Drift | 0.5 | nA/°C | VCM = 0V | 3 | |||
| Common-Mode Input Range (CMIR) | 3.6 | 3.9 | V | 3 | |||
| Common-Mode Rejection Ratio (CMRR) | 58 | 70 | dB | VCM = 0V, Input-referred | 3 | ||
| Output Voltage Swing | 3.7 | 4 | V | No load | 4 | ||
| Output Voltage Swing | 2.85 | 3.3 | V | RL = 100Ω | 4 | ||
| Output Current, Sourcing, Sinking | 22 | 40 | mA | VO = 0V | 4 | ||
| Maximum Operating Voltage | 6 | V | 4 | ||||
| Maximum Quiescent Current | 0.92 | 1.1 | mA | VS = ±5V, Both channels | 4 | ||
| Minimum Quiescent Current | 0.7 | 0.92 | mA | VS = ±5V, Both channels | 4 | ||
| Power-Supply Rejection Ratio (+PSRR) | +PSRR | 60 | 64 | dB | +VS = 4.5V to 5.5V | 4 | |
| Power-Supply Rejection Ratio (-PSRR) | -PSRR | 70 | 74 | dB | –VS = –4.5V to –5.5V | 4 | |
| Power supply | 6.5 | V | 2 | ||||
| Storage temperature range | -65 | 125 | °C | 2 | |||
| Lead temperature (soldering, 10s) | 260 | °C | soldering, 10s | 2 | |||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Maximum junction temperature, continuous operation | TJ | 140 | °C | continuous operation | 2 | ||
| ESD rating, Human body model (HBM) | 2000 | V | Human body model (HBM) | 2 | |||
| ESD rating, Charge device model (CDM) | 1000 | V | Charge device model (CDM) | 2 | |||
| ESD rating, Machine model (MM) | 150 | V | Machine model (MM) | 2 | |||
| Specified operating free-air temperature range | -40 | 85 | °C | D and DGS packages | 4 | ||
| Thermal resistance, junction-to-ambient (SO-8) | θJA | 100 | °C/W | Junction-to-ambient, D SO-8 package | 4 |
CAD (KiCad official)
- Symbol:
OPA2889ID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa2889id-etched.step/opa2889id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2889id.step/opa2889id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
6f5b4f0047138a48, retrieved 2026-10-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).