Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

KSZ8794CNXIC-TR

Microchip Tech · Interface - Specialized · QFN-64-EP(8x8)

KSZ8794CNXIC-TR from Microchip Tech, in a QFN-64-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD12A power_in 1.2V core power.
2 VDDAT power_in 3.3V or 2.5V analog power.
3 GNDA power_in Analog ground.
4 RXP1 input Port 1 physical receive signal + (differential).
5 RXM1 input Port 1 physical receive signal - (differential).
6 TXP1 output Port 1 physical transmit signal + (differential).
7 TXM1 output Port 1 physical transmit signal - (differential).
8 RXP2 input Port 2 physical receive signal + (differential).
9 RXM2 input Port 2 physical receive signal - (differential).
10 TXP2 output Port 2 physical transmit signal + (differential).
11 TXM2 output Port 2 physical transmit signal - (differential).
12 VDDAT power_in 3.3V or 2.5V analog power.
13 RXP3 input Port 3 physical receive signal + (differential).
14 RXM3 input Port 3 physical receive signal - (differential).
15 TXP3 output Port 3 physical transmit signal + (differential).
16 TXM3 output Port 3 physical transmit signal - (differential).
17 GNDA power_in Analog ground.
18 INTR_N output Active-low open-drain interrupt output; an external pull-up resistor is needed when in use.
19 LED3_1 bidirectional Port 3 LED indicator 1 (internal pull-up during reset); strap with LED3_0 selects Port 4 GMAC4 mode: 00 MII, 01 RMII, 10 reserved, 11 RGMII (default).
20 LED3_0 bidirectional Port 3 LED indicator 0 (internal pull-up during reset); strap option together with LED3_1 for Port 4 GMAC4 interface mode select.
21 VDD12D power_in 1.2V core power.
22 GNDD power_in Digital ground.
23 TXEN4/TXD4_CTL input MII/RMII: Port 4 switch transmit enable; RGMII: transmit data control (internal pull-down).
24 TXD4_0 input RGMII/MII/RMII: Port 4 switch transmit bit [0] (internal pull-down).
25 TXD4_1 input RGMII/MII/RMII: Port 4 switch transmit bit [1] (internal pull-down).
26 GNDD power_in Digital ground.
27 VDDIO power_in 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry.
28 TXD4_2 input RGMII/MII: Port 4 switch transmit bit [2]; no connection in RMII.
29 TXD4_3 input RGMII/MII: Port 4 switch transmit bit [3]; no connection in RMII.
30 TXER4 input MII: Port 4 switch transmit error; no connection in RGMII/RMII.
31 NC unconnected No connect.
32 GNDD power_in Digital ground.
33 VDD12D power_in 1.2V core power.
34 TXC4/REFCLKI4/GTXC4 bidirectional Port 4 GMAC4 clock: MII 2.5/25 MHz (output in PHY mode, input in MAC mode); RMII 50 MHz clock input in normal mode; RGMII 125 MHz clock input.
35 RXC4/GRXC4 bidirectional Port 4 GMAC4 clock: MII 2.5/25 MHz (output in PHY mode, input in MAC mode); RMII 50 MHz reference clock output; RGMII 125 MHz clock output.
36 RXD4_0 bidirectional RGMII/MII/RMII: Port 4 switch receive bit [0] (input with pull-down during reset, output otherwise).
37 RXD4_1 bidirectional RGMII/MII/RMII: Port 4 switch receive bit [1] (input with pull-down during reset, output otherwise).
38 GNDD power_in Digital ground.
39 VDDIO power_in 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry.
40 RXD4_2 bidirectional RGMII/MII: Port 4 switch receive bit [2]; no connection in RMII.
41 RXD4_3 bidirectional RGMII/MII: Port 4 switch receive bit [3]; no connection in RMII.
42 RXDV4/CRSDV4/RXD4_CTL bidirectional MII: receive data valid (RXDV4); RMII: carrier sense/receive data valid output (CRSDV4); RGMII: receive data control (RXD4_CTL).
43 RXER4 bidirectional MII: Port 4 switch receive error; no connection in RGMII/RMII.
44 CRS4 bidirectional MII: Port 4 switch carrier sense; no connection in RGMII/RMII.
45 COL4 bidirectional MII: Port 4 switch collision detect; no connection in RGMII/RMII.
46 REFCLKO bidirectional 25 MHz clock output option, enabled by default and controlled by strap pin LED2_0; better disabled if unused.
47 PME_N bidirectional Power management event output indicating a Wake On LAN event was detected; polarity programmable, default active low.
48 LED2_1 bidirectional Port 2 LED indicator 1; strap selects Port 4 MII mode (PU = MAC, PD = PHY) and RMII mode (PU = clock mode, PD = normal mode).
49 LED2_0 bidirectional Port 2 LED indicator 0; strap enables REFCLKO 25 MHz output (PU = enabled, default; PD = disabled).
50 LED1_1 bidirectional Port 1 LED indicator 1; strap selects PLL clock source in Port 4 RMII normal mode (PU = 25 MHz XI/XO, PD = external clock from TXC4).
51 LED1_0 bidirectional Port 1 LED indicator 0; strap selects RGMII speed (PU = 1 Gbps default, PD = 10/100 Mbps).
52 SPIQ bidirectional SPI serial data output in SPI client mode; strap selects serial bus (PD = SPI client mode, PU = MDC/MDIO mode), external pull-up or pull-down required.
53 SCL_MDC input Clock for SPI or MDC/MDIO interfaces, input up to 25 MHz.
54 SDA_MDIO bidirectional Data line for SPI (serial data input) or MDC/MDIO (input/output data) interfaces.
55 SPIS_N input Active-low SPI chip select; when high the device is deselected and SPIQ is high impedance, a high-to-low transition starts SPI transfer.
56 VDDIO power_in 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry.
57 GNDD power_in Digital ground.
58 RST_N input Active-low hardware reset input.
59 VDD12D power_in 1.2V core power.
60 VDDAT power_in 3.3V or 2.5V analog power.
61 ISET passive Transmit output current set; connect to GND through a 12.4 kΩ 1% resistor.
62 GNDA power_in Analog ground.
63 XI input Crystal/oscillator clock input; connects to a 25 MHz crystal or 3.3V oscillator with ±50 ppm tolerance.
64 XO output Crystal clock output; connects to one end of the 25 MHz crystal.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-64-EP(8x8)
Category Interface
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDD12A, VDD12D) -0.5 1.8 V 107
Supply voltage (VDDAT, VDDIO) -0.5 4 V 107
Input voltage -0.5 4 V 107
Output voltage -0.5 4 V 107
Lead temperature 260 °C soldering, 10s 107
Storage temperature (TS) TS -55 150 °C 107
Maximum junction temperature (TJ) TJ 125 °C 107
ESD rating (HBM) 5 kV HBM 107
Supply voltage (VDD12A, VDD12D) 1.14 1.26 V 107
Supply voltage (VDDAT) VDDAT 3.135 3.465 V VDDAT @ 3.3V 107
Supply voltage (VDDAT) VDDAT 2.375 2.625 V VDDAT @ 2.5V 107
Supply voltage (VDDIO) VDDIO 3.135 3.465 V VDDIO @ 3.3V 107
Supply voltage (VDDIO) VDDIO 2.375 2.625 V VDDIO @ 2.5V 107
Supply voltage (VDDIO) VDDIO 1.71 1.89 V VDDIO @ 1.8V 107
Ambient temperature (TA) commercial TA 0 70 °C Commercial 107
Ambient temperature (TA) industrial TA -40 85 °C Industrial 107
Package thermal resistance junction-to-ambient ΘJA 31.96 °C/W Note 5-1: 0 m/s air velocity 107
Package thermal resistance junction-to-case ΘJC 13.54 °C/W Note 5-1: 0 m/s air velocity 107
CMOS input high voltage VIH 2 V VDDIO = 3.3V 108
CMOS input high voltage VIH 1.8 V VDDIO = 2.5V 108
CMOS input high voltage VIH 1.3 V VDDIO = 1.8V 108
CMOS input low voltage VIL 0.8 V VDDIO = 3.3V 108
CMOS input low voltage VIL 0.7 V VDDIO = 2.5V 108
CMOS input low voltage VIL 0.5 V VDDIO = 1.8V 108
Input current (excluding pull-up/pull-down) IIN 10 µA VIN = GND ~ VDDIO 108
CMOS output high voltage VOH 2.4 V VDDIO = 3.3V 108
CMOS output high voltage VOH 2 V VDDIO = 2.5V 108
CMOS output high voltage VOH 1.5 V VDDIO = 1.8V 108
CMOS output low voltage VOL 0.4 V VDDIO = 3.3V 109
CMOS output low voltage VOL 0.3 V VDDIO = 1.8V 109
Output tri-state leakage IOZ 10 µA VIN = GND ~ VDDIO 109
100BASE-TX peak differential output voltage VO 0.95 1.05 V 100Ω termination on the differential output 109
100BASE-TX output voltage imbalance VIMB 2 % 100Ω termination on the differential output 109
100BASE-TX rise/fall time tr/tf 3 5 ns 109
100BASE-TX rise/fall time imbalance 0 0.5 109
100BASE-TX duty cycle distortion -0.5 0.5 ns 109
100BASE-TX overshoot 5 % 109
10BASE-T squelch threshold VSQ 300 400 585 mV 5 MHz square wave 109
10BASE-T peak differential output voltage VP 2.2 2.5 2.8 V VDDAT = 3.3V; 100Ω termination on the differential output 109
I/O pin effective pull-up resistance R1.8PU 75 95 135 kΩ VDDIO = 1.8V 109
I/O pin effective pull-down resistance R1.8PD 53 68 120 kΩ VDDIO = 1.8V 109
I/O pin effective pull-up resistance R2.5PU 46 60 93 kΩ VDDIO = 2.5V 109
I/O pin effective pull-down resistance R2.5PD 46 59 103 kΩ VDDIO = 2.5V 109
I/O pin effective pull-up resistance R3.3PU 35 45 65 kΩ VDDIO = 3.3V 109
I/O pin effective pull-down resistance R3.3PD 37 46 74 kΩ VDDIO = 3.3V 109
Data to clock output skew (at transmitter) TskewT -500 0 500 ps 110
Data to clock input skew (at receiver) TskewR 1 2.6 ns 110
Data to clock output setup (at transmitter, integrated delay) TsetupT 1 2 ns 110
Clock to data output hold (at transmitter, integrated delay) TholdT 1 2 ns 110
Data to clock input setup (at receiver, integrated delay) TsetupR 0.8 2 ns 110
Clock to data input hold (at receiver, integrated delay) TholdR 0.8 2 ns 110
Clock cycle duration Tcyc 7.2 8 8.8 ns 110
Duty cycle for gigabit Duty_G 45 50 55 % 110
Duty cycle for 10/100T Duty_T 40 50 60 % 110
Rise/fall time (20-80%) tr/tf 0.75 ns 20-80% 110

CAD (KiCad official)

  • Symbol: KSZ8794CNXIC-TR
  • Footprint: Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm
  • 3D model: QFN-64-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: ksz8794cnxic-tr-etched.step / ksz8794cnxic-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8794cnxic-tr.step / ksz8794cnxic-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (125 pp, sha256 d37034e2427691de, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF