Generated by kicad-footprint-generator · KiCad file format 20260206
KSZ8794CNXIC-TR
Microchip Tech · Interface - Specialized · QFN-64-EP(8x8)
KSZ8794CNXIC-TR from Microchip Tech, in a QFN-64-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD12A | power_in | 1.2V core power. |
| 2 | VDDAT | power_in | 3.3V or 2.5V analog power. |
| 3 | GNDA | power_in | Analog ground. |
| 4 | RXP1 | input | Port 1 physical receive signal + (differential). |
| 5 | RXM1 | input | Port 1 physical receive signal - (differential). |
| 6 | TXP1 | output | Port 1 physical transmit signal + (differential). |
| 7 | TXM1 | output | Port 1 physical transmit signal - (differential). |
| 8 | RXP2 | input | Port 2 physical receive signal + (differential). |
| 9 | RXM2 | input | Port 2 physical receive signal - (differential). |
| 10 | TXP2 | output | Port 2 physical transmit signal + (differential). |
| 11 | TXM2 | output | Port 2 physical transmit signal - (differential). |
| 12 | VDDAT | power_in | 3.3V or 2.5V analog power. |
| 13 | RXP3 | input | Port 3 physical receive signal + (differential). |
| 14 | RXM3 | input | Port 3 physical receive signal - (differential). |
| 15 | TXP3 | output | Port 3 physical transmit signal + (differential). |
| 16 | TXM3 | output | Port 3 physical transmit signal - (differential). |
| 17 | GNDA | power_in | Analog ground. |
| 18 | INTR_N | output | Active-low open-drain interrupt output; an external pull-up resistor is needed when in use. |
| 19 | LED3_1 | bidirectional | Port 3 LED indicator 1 (internal pull-up during reset); strap with LED3_0 selects Port 4 GMAC4 mode: 00 MII, 01 RMII, 10 reserved, 11 RGMII (default). |
| 20 | LED3_0 | bidirectional | Port 3 LED indicator 0 (internal pull-up during reset); strap option together with LED3_1 for Port 4 GMAC4 interface mode select. |
| 21 | VDD12D | power_in | 1.2V core power. |
| 22 | GNDD | power_in | Digital ground. |
| 23 | TXEN4/TXD4_CTL | input | MII/RMII: Port 4 switch transmit enable; RGMII: transmit data control (internal pull-down). |
| 24 | TXD4_0 | input | RGMII/MII/RMII: Port 4 switch transmit bit [0] (internal pull-down). |
| 25 | TXD4_1 | input | RGMII/MII/RMII: Port 4 switch transmit bit [1] (internal pull-down). |
| 26 | GNDD | power_in | Digital ground. |
| 27 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry. |
| 28 | TXD4_2 | input | RGMII/MII: Port 4 switch transmit bit [2]; no connection in RMII. |
| 29 | TXD4_3 | input | RGMII/MII: Port 4 switch transmit bit [3]; no connection in RMII. |
| 30 | TXER4 | input | MII: Port 4 switch transmit error; no connection in RGMII/RMII. |
| 31 | NC | unconnected | No connect. |
| 32 | GNDD | power_in | Digital ground. |
| 33 | VDD12D | power_in | 1.2V core power. |
| 34 | TXC4/REFCLKI4/GTXC4 | bidirectional | Port 4 GMAC4 clock: MII 2.5/25 MHz (output in PHY mode, input in MAC mode); RMII 50 MHz clock input in normal mode; RGMII 125 MHz clock input. |
| 35 | RXC4/GRXC4 | bidirectional | Port 4 GMAC4 clock: MII 2.5/25 MHz (output in PHY mode, input in MAC mode); RMII 50 MHz reference clock output; RGMII 125 MHz clock output. |
| 36 | RXD4_0 | bidirectional | RGMII/MII/RMII: Port 4 switch receive bit [0] (input with pull-down during reset, output otherwise). |
| 37 | RXD4_1 | bidirectional | RGMII/MII/RMII: Port 4 switch receive bit [1] (input with pull-down during reset, output otherwise). |
| 38 | GNDD | power_in | Digital ground. |
| 39 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry. |
| 40 | RXD4_2 | bidirectional | RGMII/MII: Port 4 switch receive bit [2]; no connection in RMII. |
| 41 | RXD4_3 | bidirectional | RGMII/MII: Port 4 switch receive bit [3]; no connection in RMII. |
| 42 | RXDV4/CRSDV4/RXD4_CTL | bidirectional | MII: receive data valid (RXDV4); RMII: carrier sense/receive data valid output (CRSDV4); RGMII: receive data control (RXD4_CTL). |
| 43 | RXER4 | bidirectional | MII: Port 4 switch receive error; no connection in RGMII/RMII. |
| 44 | CRS4 | bidirectional | MII: Port 4 switch carrier sense; no connection in RGMII/RMII. |
| 45 | COL4 | bidirectional | MII: Port 4 switch collision detect; no connection in RGMII/RMII. |
| 46 | REFCLKO | bidirectional | 25 MHz clock output option, enabled by default and controlled by strap pin LED2_0; better disabled if unused. |
| 47 | PME_N | bidirectional | Power management event output indicating a Wake On LAN event was detected; polarity programmable, default active low. |
| 48 | LED2_1 | bidirectional | Port 2 LED indicator 1; strap selects Port 4 MII mode (PU = MAC, PD = PHY) and RMII mode (PU = clock mode, PD = normal mode). |
| 49 | LED2_0 | bidirectional | Port 2 LED indicator 0; strap enables REFCLKO 25 MHz output (PU = enabled, default; PD = disabled). |
| 50 | LED1_1 | bidirectional | Port 1 LED indicator 1; strap selects PLL clock source in Port 4 RMII normal mode (PU = 25 MHz XI/XO, PD = external clock from TXC4). |
| 51 | LED1_0 | bidirectional | Port 1 LED indicator 0; strap selects RGMII speed (PU = 1 Gbps default, PD = 10/100 Mbps). |
| 52 | SPIQ | bidirectional | SPI serial data output in SPI client mode; strap selects serial bus (PD = SPI client mode, PU = MDC/MDIO mode), external pull-up or pull-down required. |
| 53 | SCL_MDC | input | Clock for SPI or MDC/MDIO interfaces, input up to 25 MHz. |
| 54 | SDA_MDIO | bidirectional | Data line for SPI (serial data input) or MDC/MDIO (input/output data) interfaces. |
| 55 | SPIS_N | input | Active-low SPI chip select; when high the device is deselected and SPIQ is high impedance, a high-to-low transition starts SPI transfer. |
| 56 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry. |
| 57 | GNDD | power_in | Digital ground. |
| 58 | RST_N | input | Active-low hardware reset input. |
| 59 | VDD12D | power_in | 1.2V core power. |
| 60 | VDDAT | power_in | 3.3V or 2.5V analog power. |
| 61 | ISET | passive | Transmit output current set; connect to GND through a 12.4 kΩ 1% resistor. |
| 62 | GNDA | power_in | Analog ground. |
| 63 | XI | input | Crystal/oscillator clock input; connects to a 25 MHz crystal or 3.3V oscillator with ±50 ppm tolerance. |
| 64 | XO | output | Crystal clock output; connects to one end of the 25 MHz crystal. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-64-EP(8x8) |
| Category | Interface |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD12A, VDD12D) | -0.5 | 1.8 | V | 107 | |||
| Supply voltage (VDDAT, VDDIO) | -0.5 | 4 | V | 107 | |||
| Input voltage | -0.5 | 4 | V | 107 | |||
| Output voltage | -0.5 | 4 | V | 107 | |||
| Lead temperature | 260 | °C | soldering, 10s | 107 | |||
| Storage temperature (TS) | TS | -55 | 150 | °C | 107 | ||
| Maximum junction temperature (TJ) | TJ | 125 | °C | 107 | |||
| ESD rating (HBM) | 5 | kV | HBM | 107 | |||
| Supply voltage (VDD12A, VDD12D) | 1.14 | 1.26 | V | 107 | |||
| Supply voltage (VDDAT) | VDDAT | 3.135 | 3.465 | V | VDDAT @ 3.3V | 107 | |
| Supply voltage (VDDAT) | VDDAT | 2.375 | 2.625 | V | VDDAT @ 2.5V | 107 | |
| Supply voltage (VDDIO) | VDDIO | 3.135 | 3.465 | V | VDDIO @ 3.3V | 107 | |
| Supply voltage (VDDIO) | VDDIO | 2.375 | 2.625 | V | VDDIO @ 2.5V | 107 | |
| Supply voltage (VDDIO) | VDDIO | 1.71 | 1.89 | V | VDDIO @ 1.8V | 107 | |
| Ambient temperature (TA) commercial | TA | 0 | 70 | °C | Commercial | 107 | |
| Ambient temperature (TA) industrial | TA | -40 | 85 | °C | Industrial | 107 | |
| Package thermal resistance junction-to-ambient | ΘJA | 31.96 | °C/W | Note 5-1: 0 m/s air velocity | 107 | ||
| Package thermal resistance junction-to-case | ΘJC | 13.54 | °C/W | Note 5-1: 0 m/s air velocity | 107 | ||
| CMOS input high voltage | VIH | 2 | V | VDDIO = 3.3V | 108 | ||
| CMOS input high voltage | VIH | 1.8 | V | VDDIO = 2.5V | 108 | ||
| CMOS input high voltage | VIH | 1.3 | V | VDDIO = 1.8V | 108 | ||
| CMOS input low voltage | VIL | 0.8 | V | VDDIO = 3.3V | 108 | ||
| CMOS input low voltage | VIL | 0.7 | V | VDDIO = 2.5V | 108 | ||
| CMOS input low voltage | VIL | 0.5 | V | VDDIO = 1.8V | 108 | ||
| Input current (excluding pull-up/pull-down) | IIN | 10 | µA | VIN = GND ~ VDDIO | 108 | ||
| CMOS output high voltage | VOH | 2.4 | V | VDDIO = 3.3V | 108 | ||
| CMOS output high voltage | VOH | 2 | V | VDDIO = 2.5V | 108 | ||
| CMOS output high voltage | VOH | 1.5 | V | VDDIO = 1.8V | 108 | ||
| CMOS output low voltage | VOL | 0.4 | V | VDDIO = 3.3V | 109 | ||
| CMOS output low voltage | VOL | 0.3 | V | VDDIO = 1.8V | 109 | ||
| Output tri-state leakage | IOZ | 10 | µA | VIN = GND ~ VDDIO | 109 | ||
| 100BASE-TX peak differential output voltage | VO | 0.95 | 1.05 | V | 100Ω termination on the differential output | 109 | |
| 100BASE-TX output voltage imbalance | VIMB | 2 | % | 100Ω termination on the differential output | 109 | ||
| 100BASE-TX rise/fall time | tr/tf | 3 | 5 | ns | 109 | ||
| 100BASE-TX rise/fall time imbalance | 0 | 0.5 | 109 | ||||
| 100BASE-TX duty cycle distortion | -0.5 | 0.5 | ns | 109 | |||
| 100BASE-TX overshoot | 5 | % | 109 | ||||
| 10BASE-T squelch threshold | VSQ | 300 | 400 | 585 | mV | 5 MHz square wave | 109 |
| 10BASE-T peak differential output voltage | VP | 2.2 | 2.5 | 2.8 | V | VDDAT = 3.3V; 100Ω termination on the differential output | 109 |
| I/O pin effective pull-up resistance | R1.8PU | 75 | 95 | 135 | kΩ | VDDIO = 1.8V | 109 |
| I/O pin effective pull-down resistance | R1.8PD | 53 | 68 | 120 | kΩ | VDDIO = 1.8V | 109 |
| I/O pin effective pull-up resistance | R2.5PU | 46 | 60 | 93 | kΩ | VDDIO = 2.5V | 109 |
| I/O pin effective pull-down resistance | R2.5PD | 46 | 59 | 103 | kΩ | VDDIO = 2.5V | 109 |
| I/O pin effective pull-up resistance | R3.3PU | 35 | 45 | 65 | kΩ | VDDIO = 3.3V | 109 |
| I/O pin effective pull-down resistance | R3.3PD | 37 | 46 | 74 | kΩ | VDDIO = 3.3V | 109 |
| Data to clock output skew (at transmitter) | TskewT | -500 | 0 | 500 | ps | 110 | |
| Data to clock input skew (at receiver) | TskewR | 1 | 2.6 | ns | 110 | ||
| Data to clock output setup (at transmitter, integrated delay) | TsetupT | 1 | 2 | ns | 110 | ||
| Clock to data output hold (at transmitter, integrated delay) | TholdT | 1 | 2 | ns | 110 | ||
| Data to clock input setup (at receiver, integrated delay) | TsetupR | 0.8 | 2 | ns | 110 | ||
| Clock to data input hold (at receiver, integrated delay) | TholdR | 0.8 | 2 | ns | 110 | ||
| Clock cycle duration | Tcyc | 7.2 | 8 | 8.8 | ns | 110 | |
| Duty cycle for gigabit | Duty_G | 45 | 50 | 55 | % | 110 | |
| Duty cycle for 10/100T | Duty_T | 40 | 50 | 60 | % | 110 | |
| Rise/fall time (20-80%) | tr/tf | 0.75 | ns | 20-80% | 110 |
CAD (KiCad official)
- Symbol:
KSZ8794CNXIC-TR - Footprint:
Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm - 3D model: QFN-64-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
ksz8794cnxic-tr-etched.step/ksz8794cnxic-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ksz8794cnxic-tr.step/ksz8794cnxic-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (125 pp, sha256
d37034e2427691de, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).