3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownREG113NA-5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
REG113NA-5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input; specified input range is VOUT + 0.4 V to 10 V (VIN > 1.8 V), with an absolute maximum of 12 V and the regulator dropping out when VIN < VOUT + VDROP(MAX). |
| 2 | GND | power_in | Ground reference pin; ground pin current is typically 850 µA at IOUT = 400 mA and 400 µA at IOUT = 5 mA, and drops to about 10 nA when the regulator is disabled. |
| 3 | Enable | input | Active-high enable compatible with TTL-CMOS levels: inputs at or above 1.8 V turn the output on and inputs at or below 0.5 V (max) turn it off, with an absolute maximum of -0.3 V to VIN; it can be tied to VIN when unused. |
| 4 | NR | passive | Noise reduction pin for an optional capacitor CNR (typically 0.01 µF) to ground that filters the internal reference and lowers output noise; absolute maximum voltage is -0.3 V to 6.0 V. |
| 5 | VOUT | power_out | Regulated output rated for up to 400 mA load current with a typical 500 mA current limit and foldback to 200 mA short-circuit current; no output capacitor is required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy (output voltage, at TJ=+25°C) | -1.5 | 0.5 | 1.5 | % | 3 | ||
| Accuracy over temperature | -2.3 | 2.3 | % | 3 | |||
| Output voltage vs temperature | dVOUT/dT | -2.3 | 50 | 2.3 | ppm/°C | 3 | |
| Output voltage vs line and load | -2.3 | 1 | 2.3 | % | IOUT = 5mA to 400mA, VIN = (VOUT + 0.4V) to 10V | 3 | |
| Output voltage vs line and load, over temperature | -3 | 3 | % | IOUT = 5mA to 400mA, VIN = (VOUT + 0.6V) to 10V | 3 | ||
| DC dropout voltage | VDROP | 4 | 10 | mV | IOUT = 5mA | 3 | |
| DC dropout voltage | VDROP | 250 | 325 | mV | IOUT = 400mA | 3 | |
| DC dropout voltage, over temperature | VDROP | 410 | mV | IOUT = 400mA | 3 | ||
| Current limit | ICL | 425 | 500 | 575 | mA | 3 | |
| Current limit, over temperature | ICL | 600 | mA | 3 | |||
| Enable input voltage HIGH (output enabled) | VENABLE | 1.8 | V | 3 | |||
| Enable input voltage LOW (output disabled) | VENABLE | -0.2 | 0.5 | V | 3 | ||
| Enable input current HIGH (output enabled) | IENABLE | 1 | 100 | nA | VENABLE = 1.8V to VIN, VIN = 1.8V to 6.5(4) | 3 | |
| Enable input current LOW (output disabled) | IENABLE | 2 | 100 | nA | VENABLE = 0V to 0.5V | 3 | |
| Ground pin current | IGND | 400 | 500 | µA | IOUT = 5mA | 3 | |
| Ground pin current | IGND | 850 | 1000 | µA | IOUT = 400mA | 3 | |
| Enable pin current, not enabled | 0.01 | 0.2 | µA | VENABLE ≤ 0.5V | 3 | ||
| Operating input voltage range | VIN | 1.8 | 10 | V | 3 | ||
| Specified input voltage range | VIN | 10 | V | VIN > 1.8V | 3 | ||
| Specified input voltage range, over temperature | VIN | 10 | V | VIN > 1.8V | 3 | ||
| Specified temperature range | TJ | -40 | 85 | °C | 3 | ||
| Operating temperature range | TJ | -55 | 125 | °C | 3 | ||
| Storage temperature range | TA | -65 | 150 | °C | 3 | ||
| Supply input voltage | VIN | -0.3 | 12 | V | 2 | ||
| Enable input voltage | VEN | -0.3 | V | 2 | |||
| NR pin voltage | VNR | -0.3 | 6 | V | 2 | ||
| Operating temperature range | TJ | -55 | 125 | °C | 2 | ||
| Storage temperature range | TA | -65 | 150 | °C | 2 | ||
| Lead temperature (soldering, 3s) | 240 | °C | soldering, 3s | 2 | |||
| Thermal resistance, junction-to-ambient (SOT23-5) | θJA | 200 | °C/W | Junction-to-Ambient | 3 | ||
| Output voltage (REG113-5) | VOUT | 5 | V | 3 | |||
| Short-circuit current limit | ISC | 200 | mA | 3 | |||
| Ripple rejection | 65 | dB | f = 120Hz | 3 | |||
| Thermal shutdown junction temperature | 160 | °C | Shutdown | 3 | |||
| Thermal shutdown reset junction temperature | 140 | °C | Reset from shutdown | 3 | |||
| Output disable time | 50 | µs | COUT = 1.0µF, RLOAD = 13Ω | 3 | |||
| Output enable softstart time | 1.5 | ms | COUT = 1.0µF, RLOAD = 13Ω | 3 | |||
| Output voltage noise without CNR | Vn | 23 | µVrms/V • VOUT | CNR = 0, COUT = 0 | 3 | ||
| Output voltage noise with CNR | Vn | 7 | µVrms/V • VOUT | CNR = 0.01µF, COUT = 10µF | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | connected to fused leads 5 to 8. See Figure 7 for thermal resistance for varying areas of copper. Using heavier copper | 10 |
CAD (KiCad official)
- Symbol:
REG113NA-5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
reg113na-5-3k-etched.step/reg113na-5-3k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg113na-5-3k.step/reg113na-5-3k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
c0da90b6895895f3, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).