Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R7FA2E1A53CFJ#AA0

RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)

R7FA2E1A53CFJ#AA0 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCL passive Connect this pin to VSS through the smoothing capacitor that stabilizes the internal power supply, placed close to the pin.
2 XCIN input Sub-clock oscillator input (P215 alternate); connect a crystal resonator between XCOUT and XCIN.
3 XCOUT output Sub-clock oscillator output (P214 alternate); connect a crystal resonator between XCOUT and XCIN.
4 VSS power_in Ground pin; connect to the system power supply (0 V).
5 XTAL output Output pin for the main clock oscillator crystal resonator (MOSC, 1 to 20 MHz); P213 alternate.
6 EXTAL input Main clock input pin; an external clock signal can be input through this pin (MOSC, 1 to 20 MHz); P212 alternate.
7 VCC power_in Power supply pin, operating at 1.6 to 5.5 V; connect to VSS by a 0.1-µF capacitor placed close to the pin.
8 P407 bidirectional General-purpose I/O port P407 (also AGTIO0_C, RTCOUT, SDA0_B, ADTRG0_B alternate functions).
9 P914 bidirectional General-purpose I/O port P914 (also AGTOA1_A and GTETRGB_F alternate functions).
10 P913 bidirectional General-purpose I/O port P913 (also AGTIO1_F and GTETRGA_F alternate functions).
11 P208 bidirectional General-purpose I/O port P208 (also AGTOB0_A alternate function).
12 P207 bidirectional General-purpose I/O port P207 (no alternate function listed for the 32-pin package).
13 RES input Reset input; the MCU enters the reset state when this signal goes low.
14 P201/MD bidirectional General-purpose I/O port P201; MD is the operating mode control pin, whose level must not change during operating-mode transition on release from reset.
15 P200/NMI input General-purpose input-only port P200; also serves as the non-maskable interrupt request input NMI.
16 P300/SWCLK bidirectional General-purpose I/O port P300; SWCLK is the serial wire clock input for on-chip debug.
17 P108/SWDIO bidirectional General-purpose I/O port P108; SWDIO is the serial wire debug data input/output pin.
18 P109 bidirectional General-purpose I/O port P109 (also CLKOUT_B, GTOVUP_A, GTIOC4A_A, TS10-CFC alternate functions).
19 P110 bidirectional General-purpose I/O port P110 (also GTOVLO_A, GTIOC4B_A, VCOUT, TS11-CFC, IRQ3_A alternate functions).
20 P112/TSCAP bidirectional General-purpose I/O port P112; the TSCAP pin is the secondary power supply for the touch driver (CTSU) on this pin.
21 P103 bidirectional General-purpose I/O port P103; ADC12 normal-precision analog input AN019, CMPREF1 reference input, TS14-CFC, KR03.
22 P102 bidirectional General-purpose I/O port P102; ADC12 normal-precision analog input AN020, CMPIN1 analog comparator input, ADTRG0_A external A/D trigger, KR02.
23 P101 bidirectional General-purpose I/O port P101; ADC12 normal-precision analog input AN021, CMPREF0 reference input, TS16-CFC, KR01/IRQ1_A.
24 P100 bidirectional General-purpose I/O port P100; ADC12 normal-precision analog input AN022, CMPIN0 analog comparator input, TS26-CFC, KR00/IRQ2_A.
25 P015 bidirectional General-purpose I/O port P015; ADC12 high-precision analog input AN010, which cannot be used as general I/O or TS transmission while the A/D converter is in use.
26 P014 bidirectional General-purpose I/O port P014; ADC12 high-precision analog input AN009, which cannot be used as general I/O or TS transmission while the A/D converter is in use.
27 P013 bidirectional General-purpose I/O port P013; ADC12 high-precision analog input AN008, which cannot be used as general I/O or TS transmission while the A/D converter is in use.
28 P012 bidirectional General-purpose I/O port P012; ADC12 high-precision analog input AN007, which cannot be used as general I/O or TS transmission while the A/D converter is in use.
29 AVCC0 power_in Analog power supply pin for the ADC12, operating at AVCC0 = 1.6 to 5.5 V.
30 AVSS0 power_in Analog ground pin for the ADC12, connected to 0 V (AVSS0 = VSS).
31 P011/VREFL0 power_in ADC12 analog reference ground; connect to AVSS0 when the ADC12 is not used (also general-purpose I/O port P011 and high-precision analog input AN006).
32 P010/VREFH0 power_in ADC12 analog reference voltage supply, 1.6 V to AVCC0; connect to AVCC0 when the ADC12 is not used (also general-purpose I/O port P010 and high-precision analog input AN005).

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-32(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.5 6.5 V 24
Input voltage, 5V-tolerant ports Vin -0.3 6.5 V 5V-tolerant ports 24
Reference power supply voltage VREFH0 -0.3 6.5 V 24
Analog power supply voltage AVCC0 -0.5 6.5 V 24
Operating temperature Topr -40 85 °C 85°C product grade (see Note 4) 24
Operating temperature Topr -40 105 °C 105°C product grade (see Note 4) 24
Storage temperature Tstg -55 125 °C 25
Power supply voltages VCC 1.6 5.5 V 25
Analog power supply voltages AVCC0 1.6 5.5 V 25
VREFH0 reference voltage (ADC12) VREFH0 1.6 V When used as ADC12 reference; printed maximum is AVCC0 25
External capacitance for TSCAP pin, tolerance CTSCAP -10 10 % Multilayer ceramic capacitor, tolerance ±10% or less 25
External capacitance for TSCAP pin, temperature characteristic CTSCAP -15 15 % X7R (EIA) or equivalent; ±15% or less 25
Permissible junction temperature Tj 125 °C Products with Ta -40 to +105°C; High-speed, Middle-speed, Low-speed, Subosc-speed mode 25
Permissible junction temperature (85°C product) Tj 105 °C Products with operating temperature 85°C (Note 1) 25
Input high voltage, 5V-tolerant ports VIH 5.8 V VCC = AVCC0 = 1.6 to 5.5 V; 5V-tolerant ports (P400, P401, P407) 26
Input high voltage, IIC (except SMBus) VIH 5.8 V IIC (except for SMBus) 26
Input high voltage, IIC (SMBus) VIH 2.2 V VCC = 3.6 to 5.5 V 26
Input low voltage, IIC (SMBus) VIL 0.8 V VCC = 3.6 to 5.5 V 26
Input low voltage, IIC (SMBus) VIL 0.5 V VCC = 2.7 to 3.6 V 26
Permissible output current per pin, ports P000-P004, P010-P015, P212, P213, P400, P401, P407 IOH -4 mA VCC = AVCC0 = 1.6 to 5.5 V 27
Permissible output current per pin, ports P000-P004, P010-P015, P212, P213, P400, P401, P407 IOL 8 mA VCC = AVCC0 = 1.6 to 5.5 V 27
Permissible output current per pin, other output pins IOH -4 mA VCC = AVCC0 = 1.6 to 5.5 V 27
Permissible output current per pin, other output pins IOL 20 mA VCC = AVCC0 = 1.6 to 5.5 V 27
Total output current, ports P010-P015 (32-pin) ΣIOH (max) -24 mA AVCC0 = 2.7 to 5.5 V 30
Total output current, ports P010-P015 (32-pin) ΣIOH (max) -6 mA AVCC0 = 1.8 to 2.7 V 30
Total output current, ports P010-P015 (32-pin) ΣIOH (max) -3 mA AVCC0 = 1.6 to 1.8 V 30
Total output current, ports P010-P015 (32-pin) ΣIOL (max) 48 mA AVCC0 = 2.7 to 5.5 V 30
Total output current, ports P010-P015 (32-pin) ΣIOL (max) 3.6 mA AVCC0 = 1.8 to 2.7 V 30
Total output current, ports P010-P015 (32-pin) ΣIOL (max) 1.8 mA AVCC0 = 1.6 to 1.8 V 30
Total output current, other output ports (32-pin) ΣIOH (max) -30 mA VCC = 4.0 to 5.5 V 30
Total output current, other output ports (32-pin) ΣIOL (max) 50 mA VCC = 4.0 to 5.5 V 30
Total output current, all output pins (32-pin) ΣIOH (max) -54 mA 30
Total output current, all output pins (32-pin) ΣIOL (max) 98 mA 30
Output voltage low, ports P000-P004, P010-P015 VOL 0.8 V VCC = AVCC0 = 4.0 to 5.5 V; IOL = 8.0 mA 31
Output voltage low, ports P212, P213, P400, P401, P407 VOL 0.8 V VCC = AVCC0 = 4.0 to 5.5 V; IOL = 8.0 mA 31
Output voltage low, other output pins VOL 1.2 V VCC = AVCC0 = 4.0 to 5.5 V; IOL = 20.0 mA 31
Output voltage low, ports P000-P004, P010-P015 VOL 0.4 V VCC = AVCC0 = 1.6 to 2.7 V; AVCC0 = 1.8 to 2.7 V; IOL = 0.6 mA 32
Output voltage low, other output pins VOL 0.4 V VCC = 1.8 to 2.7 V; IOL = 0.6 mA 32
Input leakage current, RES, P200, P214, P215 Iin 1 µA Vin = 0 V; Vin = VCC 32
Three-state leakage current, 5V-tolerant ports ITSI 1 µA Vin = 0 V; Vin = 5.8 V 32
Three-state leakage current, other ports ITSI 1 µA Vin = 0 V; Vin = VCC 32
Input pull-up resistor RU 10 20 100 kΩ Vin = 0 V 32
Input capacitance, P200 Cin 30 pF Vin = 0 V; f = 1 MHz; Ta = 25°C 32
Input capacitance, other input pins Cin 15 pF Vin = 0 V; f = 1 MHz; Ta = 25°C 32
Supply current, high-speed normal mode, all peripheral clocks enabled ICC 13 mA VCC = AVCC0 = 1.6 to 5.5 V; code executing from flash; ICLK = 48 MHz 33
Supply current, subosc-speed normal mode, all peripheral clocks enabled ICC 530 µA Code executing from flash; ICLK = 32.768 kHz 34
Software standby supply current, all SRAMs on ICC 1.95 12 µA Ta = 85°C 35
Software standby supply current, all SRAMs on ICC 3.9 42 µA Ta = 105°C 35
Analog power supply current during 12-bit A/D conversion IAVCC0 1.44 mA High-speed A/D conversion mode 35
Reference power supply current during 12-bit A/D conversion IREFH0 120 µA During 12-bit A/D conversion 35
Operation frequency, system clock (ICLK), high-speed mode f 0.032768 48 MHz VCC = AVCC0 = 1.8 to 5.5 V 38
Power-on VCC rising gradient SrVCC 0.02 2 ms/V Voltage monitor 0 reset disabled at startup 36
RES pulse width at power-on tRESWP 10 ms At power-on 41
RES pulse width, not at power-on tRESW 30 µs Not at power-on 41
Thermal resistance, junction to ambient, 32-pin LQFP θja 60.9 ℃/W JESD 51-2 and 51-7 compliant; reference value, 4-layer board 37
Thermal resistance, junction to top center case, 32-pin LQFP Ψjt 2.5 ℃/W JESD 51-2 and 51-7 compliant; reference value, 4-layer board 37
External capacitance for TSCAP pin, nominal CTSCAP 10 nF VCC = AVCC0 = 1.8 to 5.5 V 25
VCL smoothing capacitor, nominal 4.7 µF 25

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Terminal material (Pb-free) A: Sn (Tin) only 7

CAD (KiCad official)

  • Symbol: R7FA2E1A53CFJ#AA0
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: r7fa2e1a53cfj-aa0-etched.step / r7fa2e1a53cfj-aa0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r7fa2e1a53cfj-aa0.step / r7fa2e1a53cfj-aa0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (121 pp, sha256 9f16441e2434196a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF