component
R7FA2E1A53CFJ#AA0
Public Made by Adomby adom
RENESAS Microcontroller Units (MCUs/MPUs/SOCs), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownR7FA2E1A53CFJ#AA0
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
R7FA2E1A53CFJ#AA0 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to VSS through the smoothing capacitor that stabilizes the internal power supply, placed close to the pin. |
| 2 | XCIN | input | Sub-clock oscillator input (P215 alternate); connect a crystal resonator between XCOUT and XCIN. |
| 3 | XCOUT | output | Sub-clock oscillator output (P214 alternate); connect a crystal resonator between XCOUT and XCIN. |
| 4 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 5 | XTAL | output | Output pin for the main clock oscillator crystal resonator (MOSC, 1 to 20 MHz); P213 alternate. |
| 6 | EXTAL | input | Main clock input pin; an external clock signal can be input through this pin (MOSC, 1 to 20 MHz); P212 alternate. |
| 7 | VCC | power_in | Power supply pin, operating at 1.6 to 5.5 V; connect to VSS by a 0.1-µF capacitor placed close to the pin. |
| 8 | P407 | bidirectional | General-purpose I/O port P407 (also AGTIO0_C, RTCOUT, SDA0_B, ADTRG0_B alternate functions). |
| 9 | P914 | bidirectional | General-purpose I/O port P914 (also AGTOA1_A and GTETRGB_F alternate functions). |
| 10 | P913 | bidirectional | General-purpose I/O port P913 (also AGTIO1_F and GTETRGA_F alternate functions). |
| 11 | P208 | bidirectional | General-purpose I/O port P208 (also AGTOB0_A alternate function). |
| 12 | P207 | bidirectional | General-purpose I/O port P207 (no alternate function listed for the 32-pin package). |
| 13 | RES | input | Reset input; the MCU enters the reset state when this signal goes low. |
| 14 | P201/MD | bidirectional | General-purpose I/O port P201; MD is the operating mode control pin, whose level must not change during operating-mode transition on release from reset. |
| 15 | P200/NMI | input | General-purpose input-only port P200; also serves as the non-maskable interrupt request input NMI. |
| 16 | P300/SWCLK | bidirectional | General-purpose I/O port P300; SWCLK is the serial wire clock input for on-chip debug. |
| 17 | P108/SWDIO | bidirectional | General-purpose I/O port P108; SWDIO is the serial wire debug data input/output pin. |
| 18 | P109 | bidirectional | General-purpose I/O port P109 (also CLKOUT_B, GTOVUP_A, GTIOC4A_A, TS10-CFC alternate functions). |
| 19 | P110 | bidirectional | General-purpose I/O port P110 (also GTOVLO_A, GTIOC4B_A, VCOUT, TS11-CFC, IRQ3_A alternate functions). |
| 20 | P112/TSCAP | bidirectional | General-purpose I/O port P112; the TSCAP pin is the secondary power supply for the touch driver (CTSU) on this pin. |
| 21 | P103 | bidirectional | General-purpose I/O port P103; ADC12 normal-precision analog input AN019, CMPREF1 reference input, TS14-CFC, KR03. |
| 22 | P102 | bidirectional | General-purpose I/O port P102; ADC12 normal-precision analog input AN020, CMPIN1 analog comparator input, ADTRG0_A external A/D trigger, KR02. |
| 23 | P101 | bidirectional | General-purpose I/O port P101; ADC12 normal-precision analog input AN021, CMPREF0 reference input, TS16-CFC, KR01/IRQ1_A. |
| 24 | P100 | bidirectional | General-purpose I/O port P100; ADC12 normal-precision analog input AN022, CMPIN0 analog comparator input, TS26-CFC, KR00/IRQ2_A. |
| 25 | P015 | bidirectional | General-purpose I/O port P015; ADC12 high-precision analog input AN010, which cannot be used as general I/O or TS transmission while the A/D converter is in use. |
| 26 | P014 | bidirectional | General-purpose I/O port P014; ADC12 high-precision analog input AN009, which cannot be used as general I/O or TS transmission while the A/D converter is in use. |
| 27 | P013 | bidirectional | General-purpose I/O port P013; ADC12 high-precision analog input AN008, which cannot be used as general I/O or TS transmission while the A/D converter is in use. |
| 28 | P012 | bidirectional | General-purpose I/O port P012; ADC12 high-precision analog input AN007, which cannot be used as general I/O or TS transmission while the A/D converter is in use. |
| 29 | AVCC0 | power_in | Analog power supply pin for the ADC12, operating at AVCC0 = 1.6 to 5.5 V. |
| 30 | AVSS0 | power_in | Analog ground pin for the ADC12, connected to 0 V (AVSS0 = VSS). |
| 31 | P011/VREFL0 | power_in | ADC12 analog reference ground; connect to AVSS0 when the ADC12 is not used (also general-purpose I/O port P011 and high-precision analog input AN006). |
| 32 | P010/VREFH0 | power_in | ADC12 analog reference voltage supply, 1.6 V to AVCC0; connect to AVCC0 when the ADC12 is not used (also general-purpose I/O port P010 and high-precision analog input AN005). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | 6.5 | V | 24 | ||
| Input voltage, 5V-tolerant ports | Vin | -0.3 | 6.5 | V | 5V-tolerant ports | 24 | |
| Reference power supply voltage | VREFH0 | -0.3 | 6.5 | V | 24 | ||
| Analog power supply voltage | AVCC0 | -0.5 | 6.5 | V | 24 | ||
| Operating temperature | Topr | -40 | 85 | °C | 85°C product grade (see Note 4) | 24 | |
| Operating temperature | Topr | -40 | 105 | °C | 105°C product grade (see Note 4) | 24 | |
| Storage temperature | Tstg | -55 | 125 | °C | 25 | ||
| Power supply voltages | VCC | 1.6 | 5.5 | V | 25 | ||
| Analog power supply voltages | AVCC0 | 1.6 | 5.5 | V | 25 | ||
| VREFH0 reference voltage (ADC12) | VREFH0 | 1.6 | V | When used as ADC12 reference; printed maximum is AVCC0 | 25 | ||
| External capacitance for TSCAP pin, tolerance | CTSCAP | -10 | 10 | % | Multilayer ceramic capacitor, tolerance ±10% or less | 25 | |
| External capacitance for TSCAP pin, temperature characteristic | CTSCAP | -15 | 15 | % | X7R (EIA) or equivalent; ±15% or less | 25 | |
| Permissible junction temperature | Tj | 125 | °C | Products with Ta -40 to +105°C; High-speed, Middle-speed, Low-speed, Subosc-speed mode | 25 | ||
| Permissible junction temperature (85°C product) | Tj | 105 | °C | Products with operating temperature 85°C (Note 1) | 25 | ||
| Input high voltage, 5V-tolerant ports | VIH | 5.8 | V | VCC = AVCC0 = 1.6 to 5.5 V; 5V-tolerant ports (P400, P401, P407) | 26 | ||
| Input high voltage, IIC (except SMBus) | VIH | 5.8 | V | IIC (except for SMBus) | 26 | ||
| Input high voltage, IIC (SMBus) | VIH | 2.2 | V | VCC = 3.6 to 5.5 V | 26 | ||
| Input low voltage, IIC (SMBus) | VIL | 0.8 | V | VCC = 3.6 to 5.5 V | 26 | ||
| Input low voltage, IIC (SMBus) | VIL | 0.5 | V | VCC = 2.7 to 3.6 V | 26 | ||
| Permissible output current per pin, ports P000-P004, P010-P015, P212, P213, P400, P401, P407 | IOH | -4 | mA | VCC = AVCC0 = 1.6 to 5.5 V | 27 | ||
| Permissible output current per pin, ports P000-P004, P010-P015, P212, P213, P400, P401, P407 | IOL | 8 | mA | VCC = AVCC0 = 1.6 to 5.5 V | 27 | ||
| Permissible output current per pin, other output pins | IOH | -4 | mA | VCC = AVCC0 = 1.6 to 5.5 V | 27 | ||
| Permissible output current per pin, other output pins | IOL | 20 | mA | VCC = AVCC0 = 1.6 to 5.5 V | 27 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOH (max) | -24 | mA | AVCC0 = 2.7 to 5.5 V | 30 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOH (max) | -6 | mA | AVCC0 = 1.8 to 2.7 V | 30 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOH (max) | -3 | mA | AVCC0 = 1.6 to 1.8 V | 30 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOL (max) | 48 | mA | AVCC0 = 2.7 to 5.5 V | 30 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOL (max) | 3.6 | mA | AVCC0 = 1.8 to 2.7 V | 30 | ||
| Total output current, ports P010-P015 (32-pin) | ΣIOL (max) | 1.8 | mA | AVCC0 = 1.6 to 1.8 V | 30 | ||
| Total output current, other output ports (32-pin) | ΣIOH (max) | -30 | mA | VCC = 4.0 to 5.5 V | 30 | ||
| Total output current, other output ports (32-pin) | ΣIOL (max) | 50 | mA | VCC = 4.0 to 5.5 V | 30 | ||
| Total output current, all output pins (32-pin) | ΣIOH (max) | -54 | mA | 30 | |||
| Total output current, all output pins (32-pin) | ΣIOL (max) | 98 | mA | 30 | |||
| Output voltage low, ports P000-P004, P010-P015 | VOL | 0.8 | V | VCC = AVCC0 = 4.0 to 5.5 V; IOL = 8.0 mA | 31 | ||
| Output voltage low, ports P212, P213, P400, P401, P407 | VOL | 0.8 | V | VCC = AVCC0 = 4.0 to 5.5 V; IOL = 8.0 mA | 31 | ||
| Output voltage low, other output pins | VOL | 1.2 | V | VCC = AVCC0 = 4.0 to 5.5 V; IOL = 20.0 mA | 31 | ||
| Output voltage low, ports P000-P004, P010-P015 | VOL | 0.4 | V | VCC = AVCC0 = 1.6 to 2.7 V; AVCC0 = 1.8 to 2.7 V; IOL = 0.6 mA | 32 | ||
| Output voltage low, other output pins | VOL | 0.4 | V | VCC = 1.8 to 2.7 V; IOL = 0.6 mA | 32 | ||
| Input leakage current, RES, P200, P214, P215 | Iin | 1 | µA | Vin = 0 V; Vin = VCC | 32 | ||
| Three-state leakage current, 5V-tolerant ports | ITSI | 1 | µA | Vin = 0 V; Vin = 5.8 V | 32 | ||
| Three-state leakage current, other ports | ITSI | 1 | µA | Vin = 0 V; Vin = VCC | 32 | ||
| Input pull-up resistor | RU | 10 | 20 | 100 | kΩ | Vin = 0 V | 32 |
| Input capacitance, P200 | Cin | 30 | pF | Vin = 0 V; f = 1 MHz; Ta = 25°C | 32 | ||
| Input capacitance, other input pins | Cin | 15 | pF | Vin = 0 V; f = 1 MHz; Ta = 25°C | 32 | ||
| Supply current, high-speed normal mode, all peripheral clocks enabled | ICC | 13 | mA | VCC = AVCC0 = 1.6 to 5.5 V; code executing from flash; ICLK = 48 MHz | 33 | ||
| Supply current, subosc-speed normal mode, all peripheral clocks enabled | ICC | 530 | µA | Code executing from flash; ICLK = 32.768 kHz | 34 | ||
| Software standby supply current, all SRAMs on | ICC | 1.95 | 12 | µA | Ta = 85°C | 35 | |
| Software standby supply current, all SRAMs on | ICC | 3.9 | 42 | µA | Ta = 105°C | 35 | |
| Analog power supply current during 12-bit A/D conversion | IAVCC0 | 1.44 | mA | High-speed A/D conversion mode | 35 | ||
| Reference power supply current during 12-bit A/D conversion | IREFH0 | 120 | µA | During 12-bit A/D conversion | 35 | ||
| Operation frequency, system clock (ICLK), high-speed mode | f | 0.032768 | 48 | MHz | VCC = AVCC0 = 1.8 to 5.5 V | 38 | |
| Power-on VCC rising gradient | SrVCC | 0.02 | 2 | ms/V | Voltage monitor 0 reset disabled at startup | 36 | |
| RES pulse width at power-on | tRESWP | 10 | ms | At power-on | 41 | ||
| RES pulse width, not at power-on | tRESW | 30 | µs | Not at power-on | 41 | ||
| Thermal resistance, junction to ambient, 32-pin LQFP | θja | 60.9 | ℃/W | JESD 51-2 and 51-7 compliant; reference value, 4-layer board | 37 | ||
| Thermal resistance, junction to top center case, 32-pin LQFP | Ψjt | 2.5 | ℃/W | JESD 51-2 and 51-7 compliant; reference value, 4-layer board | 37 | ||
| External capacitance for TSCAP pin, nominal | CTSCAP | 10 | nF | VCC = AVCC0 = 1.8 to 5.5 V | 25 | ||
| VCL smoothing capacitor, nominal | 4.7 | µF | 25 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminal material (Pb-free) A: Sn (Tin) only | 7 |
CAD (KiCad official)
- Symbol:
R7FA2E1A53CFJ#AA0 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r7fa2e1a53cfj-aa0-etched.step/r7fa2e1a53cfj-aa0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r7fa2e1a53cfj-aa0.step/r7fa2e1a53cfj-aa0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (121 pp, sha256
9f16441e2434196a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).