3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM34910CSD
Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)
LM34910CSD from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Internally connected to the buck switch source, connecting to the external inductor, diode, and boost capacitor. |
| 2 | BST | passive | Boost pin for the bootstrap capacitor, which is charged by an internal diode during the off-time; a 0.022 µF capacitor connects from SW to this pin. |
| 3 | ISEN | input | Current sense input connected through the current sense resistor to SGND, with current limit set at 1.25A. |
| 4 | SGND | power_in | Sense ground, where re-circulating current flows into the current sense resistor. |
| 5 | RTN | power_in | Ground for all internal circuitry other than the current limit detection. |
| 6 | FB | input | Feedback input to the regulation and over-voltage comparators, with a regulation level of 2.5V. |
| 7 | SS | passive | Soft-start pin, where an internal 11.5 µA current source charges an external capacitor to 2.5V. |
| 8 | RON/SD | input | An external resistor from VIN to this pin sets the buck switch on-time, and grounding this pin shuts down the regulator. |
| 9 | VCC | power_out | Output of the start-up regulator, nominally regulated to 7.0V, which can be fed by an external 8V-14V auxiliary voltage to reduce internal dissipation. |
| 10 | VIN | power_in | Input supply voltage with a nominal input range of 8.0V to 50V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC regulated output | VCCReg | 6.6 | 7 | 7.4 | V | 3 | |
| IIN operating current | IIN | 0.63 | 1 | mA | Non-switching, FB = 3V | 3 | |
| IIN shutdown current | IIN | 80 | 250 | µA | RON/SD = 0V | 3 | |
| Buck Switch Rds(on) | Rds(on) | 0.45 | 0.95 | Ω | ITEST = 200 mA | 3 | |
| Gate Drive UVLO | UVLOGD | 3 | 4.3 | 5.5 | V | VBST - VSW Increasing | 3 |
| ILIM threshold | ILIM | 1 | 1.25 | 1.5 | A | Current out of ISEN | 4 |
| On-time | tON - 1 | 2.1 | 2.75 | 3.6 | µs | VIN = 10V, RON = 200 kΩ | 4 |
| Shutdown threshold | 0.35 | 0.65 | 1.1 | V | Voltage at RON/SD rising | 4 | |
| FB regulation threshold | VREF | 2.44 | 2.5 | 2.55 | V | SS pin = steady state | 4 |
| VIN to GND | 55 | V | 3 | ||||
| BST to GND | 70 | V | 3 | ||||
| SW to GND | -1.5 | V | Steady State | 3 | |||
| ESD Rating | 2 | kV | Human Body Model | 3 | |||
| BST to VCC | 55 | V | 3 | ||||
| VIN to SW | 55 | V | 3 | ||||
| BST to SW | 14 | V | 3 | ||||
| VCC to GND | 14 | V | 3 | ||||
| SGND to RTN | -0.3 | 0.3 | V | 3 | |||
| SS to RTN | -0.3 | 4 | V | 3 | |||
| All other inputs to GND | -0.3 | 7 | V | 3 | |||
| Storage temperature range | -55 | 150 | °C | 3 | |||
| Junction temperature (absolute maximum) | 150 | °C | 3 | ||||
| VIN operating input voltage | VIN | 8 | 50 | V | 3 | ||
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| VIN-VCC dropout voltage | 1.4 | V | ICC = 0 mA, VCC = VCCReg - 100 mV | 3 | |||
| VCC output impedance | 140 | Ω | 0 mA ≤ ICC ≤ 5 mA | 3 | |||
| VCC current limit | 9 | mA | VCC = 0V | 3 | |||
| VCC under-voltage lockout threshold | UVLOVCC | 5.8 | V | VCC increasing | 3 | ||
| VCC under-voltage lockout hysteresis | UVLOVCC | 150 | mV | VCC decreasing | 3 | ||
| VCC UVLO filter delay | UVLOVCC | 3 | µs | 100 mV overdrive | 3 | ||
| Gate Drive UVLO hysteresis | UVLOGD | 440 | mV | 3 | |||
| Softstart pull-up voltage | 2.5 | V | 4 | ||||
| Softstart internal current source | 11.5 | µA | 4 | ||||
| Resistance from ISEN to SGND | 130 | mΩ | 4 | ||||
| Current limit response time | 150 | ns | 4 | ||||
| On-time | tON - 2 | 560 | ns | VIN = 50V, RON = 200 kΩ | 4 | ||
| Threshold hysteresis | 40 | mV | Voltage at RON/SD falling | 4 | |||
| Minimum off-time | tOFF | 280 | ns | 4 | |||
| FB over-voltage threshold | 2.875 | V | 4 | ||||
| FB bias current | 100 | nA | 4 | ||||
| Thermal shutdown temperature | TSD | 175 | °C | 4 | |||
| Thermal shutdown hysteresis | 20 | °C | 4 |
CAD (KiCad official)
- Symbol:
LM34910CSD - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm34910csd-etched.step/lm34910csd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm34910csd.step/lm34910csd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
9316b05405136b7c, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).