Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

EMC2302-1-AIZL-TR

Microchip Tech · Motor Driver ICs · MSOP-10

EMC2302-1-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SMDATA bidirectional Open-drain SMBus data pin that requires an external pull-up resistor, and it is 5V tolerant as a DIOD-type digital I/O.
2 SMCLK input SMBus clock input that requires an external pull-up resistor, and it is 5V tolerant as a DI-type digital input.
3 VDD power_in Input power supply for the device; the datasheet text provided does not state its voltage limits.
4 GND power_in Ground for the device.
5 PWM1 output Output control signal from Fan Speed Control 1, configurable as a push-pull PWM output or an open-drain PWM output.
6 TACH1 input Open-drain tachometer input for Fan Speed Control 1 feedback that requires an external pull-up resistor, and it is 5V tolerant.
7 PWM2 output Output control signal from Fan Speed Control 2, configurable as a push-pull PWM output or an open-drain PWM output.
8 TACH2 input Open-drain tachometer input for Fan Speed Control 2 feedback that requires an external pull-up resistor, and it is 5V tolerant.
9 CLK bidirectional Common 32.768 kHz clock pin that acts as an external clock input for tach accuracy or as a push-pull clock output to other fan controllers.
10 ALERT output Active-low open-drain SMBus alert interrupt output that indicates out-of-limit or other error conditions and requires an external pull-up resistor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Power Supply Chip
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 3.3 3.6 V 4
Supply Current IDD 400 550 µA EMC2302, all channels active 4
PWM Duty Cycle DUTY 0 100 % 4
Tachometer Range TACH 480 16000 RPM 4
Tachometer Setting Accuracy TACH -1 1 % External oscillator 32.768kHz 4
Tachometer Setting Accuracy TACH -2 2 % Internal oscillator 4
Input High Voltage VIH 2 V 4
Input Low Voltage VIL 0.8 V 4
Output Low Voltage VOL 0.4 V 8 mA current sink 4
Leakage Current ILEAK -5 5 µA ALERT pin powered and unpowered; 0°C < TA < 85°C; pull-up voltage ≤ 3.6V 4
SMBus Input High Voltage VIH 2 V 4
SMBus Input Low Voltage VIL 0.8 V 4
SMBus Output Low Voltage VOL 0.4 V 4 mA current sink 4
SMBus Input High/Low Current IIH/IIL -5 5 µA Powered and unpowered; 0°C < TA < 85°C 4
Clock Frequency fSMB 10 400 kHz 4
Spike Suppression tSP 50 ns 4
Bus Free Time Start to Stop tBUF 1.3 µs 4
Setup Time: Start tSU:STA 0.6 µs 4
Setup Time: Stop tSU:STP 0.6 µs 4
Data Hold Time tHD:DAT 0 µs 4
Data Setup Time tSU:DAT 0.6 µs 4
Clock Low Period tLOW 1.3 µs 4
Clock High Period tHIGH 0.6 µs 4
Clock/Data Fall Time tFALL 300 ns Min. = 20 + 0.1CLOAD ns 4
Clock/Data Rise Time tRISE 300 ns Min. = 20 + 0.1CLOAD ns 5
Capacitive Load CLOAD 400 pF Per bus line 5
Ambient Temperature Under Bias -40 125 °C 3
Storage Temperature -55 150 °C 3
Voltage on VDD with respect to GND VDD -0.3 4 V With respect to GND 3
Voltage on 5V tolerant pins (/V5VT_pin - VDD/) with respect to GND 0 3.6 V /V5VT_pin - VDD/ with respect to GND; see Note 1 3
Voltage on 5V tolerant pins with respect to GND -0.3 5.5 V With respect to GND 3
ESD Rating, All Pins, HBM 2 kV All pins, HBM 3
Operating Ambient Temperature TA -40 125 °C Operating conditions with VDD = 3V to 3.6V (SMBus DC characteristics) 4

CAD (KiCad official)

  • Symbol: EMC2302-1-AIZL-TR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: emc2302-1-aizl-tr-etched.step / emc2302-1-aizl-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc2302-1-aizl-tr.step / emc2302-1-aizl-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (70 pp, sha256 6cb6c487d2a6d827, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF