component
EMC2302-1-AIZL-TR
Public Made by Adomby adom
Microchip Tech Motor Driver ICs, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEMC2302-1-AIZL-TR
Microchip Tech · Motor Driver ICs · MSOP-10
EMC2302-1-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SMDATA | bidirectional | Open-drain SMBus data pin that requires an external pull-up resistor, and it is 5V tolerant as a DIOD-type digital I/O. |
| 2 | SMCLK | input | SMBus clock input that requires an external pull-up resistor, and it is 5V tolerant as a DI-type digital input. |
| 3 | VDD | power_in | Input power supply for the device; the datasheet text provided does not state its voltage limits. |
| 4 | GND | power_in | Ground for the device. |
| 5 | PWM1 | output | Output control signal from Fan Speed Control 1, configurable as a push-pull PWM output or an open-drain PWM output. |
| 6 | TACH1 | input | Open-drain tachometer input for Fan Speed Control 1 feedback that requires an external pull-up resistor, and it is 5V tolerant. |
| 7 | PWM2 | output | Output control signal from Fan Speed Control 2, configurable as a push-pull PWM output or an open-drain PWM output. |
| 8 | TACH2 | input | Open-drain tachometer input for Fan Speed Control 2 feedback that requires an external pull-up resistor, and it is 5V tolerant. |
| 9 | CLK | bidirectional | Common 32.768 kHz clock pin that acts as an external clock input for tach accuracy or as a push-pull clock output to other fan controllers. |
| 10 | ALERT | output | Active-low open-drain SMBus alert interrupt output that indicates out-of-limit or other error conditions and requires an external pull-up resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | 4 | |
| Supply Current | IDD | 400 | 550 | µA | EMC2302, all channels active | 4 | |
| PWM Duty Cycle | DUTY | 0 | 100 | % | 4 | ||
| Tachometer Range | TACH | 480 | 16000 | RPM | 4 | ||
| Tachometer Setting Accuracy | TACH | -1 | 1 | % | External oscillator 32.768kHz | 4 | |
| Tachometer Setting Accuracy | TACH | -2 | 2 | % | Internal oscillator | 4 | |
| Input High Voltage | VIH | 2 | V | 4 | |||
| Input Low Voltage | VIL | 0.8 | V | 4 | |||
| Output Low Voltage | VOL | 0.4 | V | 8 mA current sink | 4 | ||
| Leakage Current | ILEAK | -5 | 5 | µA | ALERT pin powered and unpowered; 0°C < TA < 85°C; pull-up voltage ≤ 3.6V | 4 | |
| SMBus Input High Voltage | VIH | 2 | V | 4 | |||
| SMBus Input Low Voltage | VIL | 0.8 | V | 4 | |||
| SMBus Output Low Voltage | VOL | 0.4 | V | 4 mA current sink | 4 | ||
| SMBus Input High/Low Current | IIH/IIL | -5 | 5 | µA | Powered and unpowered; 0°C < TA < 85°C | 4 | |
| Clock Frequency | fSMB | 10 | 400 | kHz | 4 | ||
| Spike Suppression | tSP | 50 | ns | 4 | |||
| Bus Free Time Start to Stop | tBUF | 1.3 | µs | 4 | |||
| Setup Time: Start | tSU:STA | 0.6 | µs | 4 | |||
| Setup Time: Stop | tSU:STP | 0.6 | µs | 4 | |||
| Data Hold Time | tHD:DAT | 0 | µs | 4 | |||
| Data Setup Time | tSU:DAT | 0.6 | µs | 4 | |||
| Clock Low Period | tLOW | 1.3 | µs | 4 | |||
| Clock High Period | tHIGH | 0.6 | µs | 4 | |||
| Clock/Data Fall Time | tFALL | 300 | ns | Min. = 20 + 0.1CLOAD ns | 4 | ||
| Clock/Data Rise Time | tRISE | 300 | ns | Min. = 20 + 0.1CLOAD ns | 5 | ||
| Capacitive Load | CLOAD | 400 | pF | Per bus line | 5 | ||
| Ambient Temperature Under Bias | -40 | 125 | °C | 3 | |||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Voltage on VDD with respect to GND | VDD | -0.3 | 4 | V | With respect to GND | 3 | |
| Voltage on 5V tolerant pins (/V5VT_pin - VDD/) with respect to GND | 0 | 3.6 | V | /V5VT_pin - VDD/ with respect to GND; see Note 1 | 3 | ||
| Voltage on 5V tolerant pins with respect to GND | -0.3 | 5.5 | V | With respect to GND | 3 | ||
| ESD Rating, All Pins, HBM | 2 | kV | All pins, HBM | 3 | |||
| Operating Ambient Temperature | TA | -40 | 125 | °C | Operating conditions with VDD = 3V to 3.6V (SMBus DC characteristics) | 4 |
CAD (KiCad official)
- Symbol:
EMC2302-1-AIZL-TR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
emc2302-1-aizl-tr-etched.step/emc2302-1-aizl-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);emc2302-1-aizl-tr.step/emc2302-1-aizl-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (70 pp, sha256
6cb6c487d2a6d827, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).