Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SiI9233ACTU

Lattice · Video Interface ICs · TQFP-144(20x20)

SiI9233ACTU from Lattice, in a TQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RSVDNC unconnected Reserved, must be left unconnected.
2 APVCC12 power_in Audio clock regeneration PLL analog VCC, must be connected to 1.2 V.
3 XTALVCC33 power_in Audio clock regeneration PLL crystal oscillator power, must be connected to 3.3 V.
4 XTALOUT output Crystal clock output (LVTTL, 4 mA); leave unconnected when XTALIN is driven by a clock.
5 XTALIN input Crystal clock input, 5 V tolerant LVTTL, frequency required 26 MHz to 28.5 MHz.
6 XTALGND power_in Audio clock regeneration ground.
7 IOVCC33 power_in Input/output pin VCC, 3.3 V.
8 CVCC12 power_in Digital logic VCC, 1.2 V.
9 RSVDNC unconnected Reserved, must be left unconnected.
10 RSVDNC unconnected Reserved, must be left unconnected.
11 RSVDL power_in Reserved, must be tied to ground.
12 GPIO0/XCLKOUT bidirectional Programmable GPIO0 (LVTTL, 4 mA) or additional clock output from the crystal oscillator circuit.
13 GPIO1/SCDT bidirectional Programmable GPIO1 (LVTTL, 4 mA) or sync detection output indicating active video at the HDMI input port.
14 GPIO2/EVNODD bidirectional Programmable GPIO2 (LVTTL, 8 mA) or output indicating even or odd field for interlaced formats.
15 RSVDNC unconnected Reserved, must be left unconnected.
16 GPIO4 bidirectional Programmable GPIO4 (LVTTL, 4 mA).
17 GPIO5 bidirectional Programmable GPIO5 (LVTTL, 4 mA).
18 RSVDNC unconnected Reserved, must be left unconnected.
19 GPIO6/DL3 bidirectional Programmable GPIO6 (LVTTL, 4 mA) or DSD serial left channel 3 data output.
20 GPIO7/DR3 bidirectional Programmable GPIO7 (LVTTL, 4 mA) or DSD serial right channel 3 data output.
21 RESET# input Active-low reset input, Schmitt, 5 V tolerant.
22 INT output Interrupt output (LVTTL, 4 mA) with configurable polarity and push-pull or open-drain drive; sources enabled through INT_EN register.
23 CSCL input Configuration/status I2C clock, Schmitt, 5 V tolerant.
24 CSDA bidirectional Configuration/status I2C data, Schmitt, 5 V tolerant, 3 mA.
25 CI2CA input Local I2C address select: LOW = 0x60/0x68, HIGH = 0x62/0x6A; 5 V tolerant LVTTL.
26 CEC_A bidirectional HDMI-compliant CEC I/O to the CEC signal of all HDMI connectors, 5 V tolerant, with internal pull-up resistor.
27 CEC_D bidirectional CEC interface to local system, true open-drain, external pull-up required.
28 SBVCC5 power_in Standby power supply, 5 V; all other supplies can be off with SBVCC5 on.
29 R0PWR5V input 5 V power and port detection input for HDMI port 0, used to power internal EDID when device is not powered; 5 V tolerant.
30 HPD0 output Hotplug output signal to HDMI port 0 connector indicating EDID is readable (LVTTL, 4 mA).
31 DSCL0 input DDC I2C clock for port 0, Schmitt open drain, 5 V tolerant, used for HDCP exchange.
32 DSDA0 bidirectional DDC I2C data for port 0, Schmitt open drain, 5 V tolerant, 3 mA.
33 R1PWR5V input 5 V power and port detection input for HDMI port 1, used to power internal EDID when device is not powered; 5 V tolerant.
34 HPD1 output Hotplug output signal to HDMI port 1 connector indicating EDID is readable (LVTTL, 4 mA).
35 DSCL1 input DDC I2C clock for port 1, Schmitt open drain, 5 V tolerant, used for HDCP exchange.
36 DSDA1 bidirectional DDC I2C data for port 1, Schmitt open drain, 5 V tolerant, 3 mA.
37 R2PWR5V input 5 V power and port detection input for HDMI port 2, used to power internal EDID when device is not powered; 5 V tolerant.
38 HPD2 output Hotplug output signal to HDMI port 2 connector indicating EDID is readable (LVTTL, 4 mA).
39 DSCL2 input DDC I2C clock for port 2, Schmitt open drain, 5 V tolerant, used for HDCP exchange.
40 DSDA2 bidirectional DDC I2C data for port 2, Schmitt open drain, 5 V tolerant, 3 mA.
41 R3PWR5V input 5 V power and port detection input for HDMI port 3, used to power internal EDID when device is not powered; 5 V tolerant.
42 HPD3 output Hotplug output signal to HDMI port 3 connector indicating EDID is readable (LVTTL, 4 mA).
43 DSCL3 input DDC I2C clock for port 3, Schmitt open drain, 5 V tolerant, used for HDCP exchange.
44 DSDA3 bidirectional DDC I2C data for port 3, Schmitt open drain, 5 V tolerant, 3 mA.
45 RSVDNC unconnected Reserved, must be left unconnected.
46 RSVDNC unconnected Reserved, must be left unconnected.
47 RSVDNC unconnected Reserved, must be left unconnected.
48 RSVDNC unconnected Reserved, must be left unconnected.
49 RSVDNC unconnected Reserved, must be left unconnected.
50 GND power_in Ground.
51 Q35 output Bit 35 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
52 Q34 output Bit 34 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
53 Q33 output Bit 33 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
54 Q32 output Bit 32 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
55 Q31 output Bit 31 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
56 Q30 output Bit 30 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
57 Q29 output Bit 29 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
58 Q28 output Bit 28 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
59 Q27 output Bit 27 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
60 CVCC12 power_in Digital logic VCC, 1.2 V.
61 IOVCC33 power_in Input/output pin VCC, 3.3 V.
62 Q26 output Bit 26 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
63 Q25 output Bit 25 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
64 Q24 output Bit 24 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
65 Q23 output Bit 23 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
66 Q22 output Bit 22 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
67 Q21 output Bit 21 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
68 Q20 output Bit 20 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
69 Q19 output Bit 19 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
70 Q18 output Bit 18 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
71 CVCC12 power_in Digital logic VCC, 1.2 V.
72 IOVCC33 power_in Input/output pin VCC, 3.3 V.
73 DE output Data enable output (LVTTL, drive programmable 2 mA to 14 mA).
74 VSYNC output Vertical sync output, carries sync for embedded and separate sync configurations (LVTTL, 2 mA to 14 mA).
75 HSYNC output Horizontal sync output, carries sync for embedded and separate sync configurations (LVTTL, 2 mA to 14 mA).
76 ODCK output Output data clock (LVTTL, drive programmable 2 mA to 14 mA).
77 Q17 output Bit 17 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
78 Q16 output Bit 16 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
79 Q15 output Bit 15 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
80 Q14 output Bit 14 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
81 Q13 output Bit 13 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
82 Q12 output Bit 12 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
83 Q11 output Bit 11 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
84 Q10 output Bit 10 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
85 Q9 output Bit 9 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
86 CVCC12 power_in Digital logic VCC, 1.2 V.
87 IOVCC33 power_in Input/output pin VCC, 3.3 V.
88 Q8 output Bit 8 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
89 Q7 output Bit 7 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
90 Q6 output Bit 6 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
91 Q5 output Bit 5 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
92 Q4 output Bit 4 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
93 Q3 output Bit 3 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
94 Q2 output Bit 2 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
95 Q1 output Bit 1 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
96 Q0 output Bit 0 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance).
97 CVCC12 power_in Digital logic VCC, 1.2 V.
98 IOVCC33 power_in Input/output pin VCC, 3.3 V.
99 WS/DR0 output I2S word select output or DSD serial right channel 0 data output (LVTTL, 4 mA).
100 SCK/DCLK output I2S serial clock output or DSD clock output (LVTTL, 4 mA).
101 SD0/DL0 output I2S serial data output or DSD serial left channel 0 data output (LVTTL, 4 mA).
102 SD1/DR1 output I2S serial data output or DSD serial right channel 1 data output (LVTTL, 4 mA).
103 SD2/DL1 output I2S serial data output or DSD serial left channel 1 data output (LVTTL, 4 mA).
104 SD3/DR2 output I2S serial data output or DSD serial right channel 2 data output (LVTTL, 4 mA).
105 MCLK output Audio master clock output (LVTTL, 8 mA).
106 SPDIF/DL2 output S/PDIF audio output or DSD serial left channel 2 data output (LVTTL, 4 mA).
107 GPIO3/MUTEOUT bidirectional Programmable GPIO3 (LVTTL, 4 mA) or mute audio output signal to external downstream audio device.
108 AVCC33 power_in TMDS analog VCC, 3.3 V.
109 R0XC- input HDMI port 0 TMDS input clock pair, negative.
110 R0XC+ input HDMI port 0 TMDS input clock pair, positive.
111 R0X0- input HDMI port 0 TMDS input data pair 0, negative.
112 R0X0+ input HDMI port 0 TMDS input data pair 0, positive.
113 R0X1- input HDMI port 0 TMDS input data pair 1, negative.
114 R0X1+ input HDMI port 0 TMDS input data pair 1, positive.
115 R0X2- input HDMI port 0 TMDS input data pair 2, negative.
116 R0X2+ input HDMI port 0 TMDS input data pair 2, positive.
117 AVCC12 power_in TMDS analog VCC, 1.2 V.
118 R1XC- input HDMI port 1 TMDS input clock pair, negative.
119 R1XC+ input HDMI port 1 TMDS input clock pair, positive.
120 R1X0- input HDMI port 1 TMDS input data pair 0, negative.
121 R1X0+ input HDMI port 1 TMDS input data pair 0, positive.
122 R1X1- input HDMI port 1 TMDS input data pair 1, negative.
123 R1X1+ input HDMI port 1 TMDS input data pair 1, positive.
124 R1X2- input HDMI port 1 TMDS input data pair 2, negative.
125 R1X2+ input HDMI port 1 TMDS input data pair 2, positive.
126 AVCC33 power_in TMDS analog VCC, 3.3 V.
127 R2XC- input HDMI port 2 TMDS input clock pair, negative.
128 R2XC+ input HDMI port 2 TMDS input clock pair, positive.
129 R2X0- input HDMI port 2 TMDS input data pair 0, negative.
130 R2X0+ input HDMI port 2 TMDS input data pair 0, positive.
131 R2X1- input HDMI port 2 TMDS input data pair 1, negative.
132 R2X1+ input HDMI port 2 TMDS input data pair 1, positive.
133 R2X2- input HDMI port 2 TMDS input data pair 2, negative.
134 R2X2+ input HDMI port 2 TMDS input data pair 2, positive.
135 AVCC12 power_in TMDS analog VCC, 1.2 V.
136 R3XC- input HDMI port 3 TMDS input clock pair, negative.
137 R3XC+ input HDMI port 3 TMDS input clock pair, positive.
138 R3X0- input HDMI port 3 TMDS input data pair 0, negative.
139 R3X0+ input HDMI port 3 TMDS input data pair 0, positive.
140 R3X1- input HDMI port 3 TMDS input data pair 1, negative.
141 R3X1+ input HDMI port 3 TMDS input data pair 1, positive.
142 R3X2- input HDMI port 3 TMDS input data pair 2, negative.
143 R3X2+ input HDMI port 3 TMDS input data pair 2, positive.
144 AVCC33 power_in TMDS analog VCC, 3.3 V.

Key specifications

Parameter Value
Manufacturer Lattice
Package TQFP-144(20x20)
Category Interface ICs
Pins 144

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
I/O Pin Supply Voltage (abs max) IOVCC33 -0.3 4 V 19
TMDS Analog Supply Voltage (abs max) AVCC12 -0.3 1.9 V 19
TMDS Analog Supply Voltage (abs max) AVCC33 -0.3 4 V 19
Audio PLL Supply Voltage (abs max) APVCC12 -0.3 1.9 V 19
Digital Core Supply Voltage (abs max) CVCC12 -0.3 1.9 V 19
ACR PLL Crystal Oscillator Supply Voltage (abs max) XTALVCC33 -0.3 4 V 19
Standby Supply Voltage (abs max) SBVCC5 -0.3 5.7 V 19
Input Voltage VI -0.3 V Max is IOVCC33 + 0.3 V 19
Input Voltage on 5 V tolerant Pins V5V-Tolerant -0.3 5.5 V 19
Junction Temperature TJ 125 C 19
Storage Temperature TSTG -65 150 C 19
I/O Pin Supply Voltage IOVCC33 3.13 3.3 3.47 V 20
TMDS Analog Supply Voltage 1.2 V AVCC12 1.14 1.2 1.26 V 20
TMDS Analog Supply Voltage 3.3 V AVCC33 3.13 3.3 3.47 V 20
Audio PLL Supply Voltage APVCC12 1.14 1.2 1.26 V 20
Digital Core Supply Voltage CVCC12 1.14 1.2 1.26 V 20
ACR PLL Crystal Oscillator Supply Voltage XTALVCC33 3.13 3.3 3.47 V 20
Standby Supply Voltage SBVCC5 4.75 5 5.25 V 20
DDC I2C I/O Reference Voltage RnPWR5V 4.7 5 5.3 V 20
Difference between two 3.3 V Power Pins DIFF33 1 V 20
Difference between two 1.2 V Power Pins DIFF12 1 V 20
Difference between any 3.3 V and 1.2 V Pin DIFF3312 -1 2.6 V 20
Supply Voltage Noise VCCN 100 mVP-P 20
Ambient Temperature (with power applied) TA 0 25 70 C 20
Ambient Thermal Resistance (Theta JA) θja 27 C/W 20
HIGH-level Input Voltage VIH 2 V LVTTL 21
LOW-level Input Voltage VIL 0.8 V LVTTL 21
RESET# LOW to HIGH Threshold VTH+ 1.46 V RESET# pin, Schmitt 21
RESET# HIGH to LOW Threshold VTH- 0.96 V RESET# pin, Schmitt 21
DDC LOW to HIGH Threshold DDC VTH+ 3 V DSDA0, DSDA1, DSCL0 and DSCL1 pins 21
DDC HIGH to LOW Threshold DDC VTH- 1.5 V DSDA0, DSDA1, DSCL0 and DSCL1 pins 21
Local I2C LOW to HIGH Threshold Local I2C VTH+ 2.1 V CSCL and CSDA pins 21
Local I2C HIGH to LOW Threshold Local I2C VTH- 0.86 V CSCL and CSDA pins 21
HIGH-level Output Voltage VOH 2.4 V LVTTL 21
LOW-level Output Voltage VOL 0.4 V LVTTL 21
Output Leakage Current IOL -10 10 A High Impedance 21
Differential Input Voltage VID 75 250 780 mV 21
4 mA Digital Output Drive IOD4 4 mA VOUT = 2.4 V / VOUT = 0.4 V 21
8 mA Digital Output Drive IOD8 8 mA VOUT = 2.4 V / VOUT = 0.4 V 21
12 mA Digital Output Drive IOD12 12 mA VOUT = 2.4 V / VOUT = 0.4 V 21
Internal Pull Down Resistor RPD 25 50 110 kΩ Outputs, IOVCC33 = 3.3 V 21
Output Pull Down Current IOPD 60 90 A Outputs, IOVCC33 = 3.6 V 21
Input Pull Down Current IIPD 60 90 A Input, IOVCC33 = 3.6 V 21
Differential Input Clock Frequency FRXC 25 225 MHz 24
Differential Input Clock Period TRXC 4.44 40 ns 24
Differential Input Clock Jitter tolerance TIJIT 400 ps 74.25 MHz 24
Rise Time (12/15/18-bit) DLHT 1.5 ns CL = 10 pF 24
Fall Time (12/15/18-bit) DHLT 1.5 ns CL = 10 pF 24
ODCK Cycle Time (12/15/18-bit) RCIP 12.12 40 ns CL = 10 pF 24
ODCK Frequency (12/15/18-bit) FCIP 25 82.5 MHz CL = 10 pF 24
ODCK-to-Output Delay TCK2OUT 0.4 2.5 ns CL = 10 pF 24
ODCK Cycle Time (16/20/24/30/36-bit) RCIP 6.06 40 ns CL = 10 pF 24
ODCK Frequency (16/20/24/30/36-bit) FCIP 25 165 MHz CL = 10 pF 24
SCK to SD or WS Delay TSCK2SD -5 5 ns CL = 10 pF 25
Audio Pipeline Delay TAUDDLY 40 80 µs 25
MCLK Frequency FMCLK 4 50 MHz CL = 10 pF 25
External Crystal Freq. FXTAL 26 27 28.5 MHz 25
Speed on Local I2C Port FI2C 400 kHz CL = 400 pF 26
RESET# Signal LOW Time for valid reset TRESET 50 µs 26

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts gold SiI9233ACTU 25 MHz, 225 MHz HDMI Gold 1080p/60 Hz 144-pin TQFP ePad Extended (-30 °C to +85 °C) 71

CAD (KiCad official)

  • Symbol: SiI9233ACTU
  • Footprint: Package_QFP:TQFP-144_20x20mm_P0.5mm
  • 3D model: TQFP-144(20x20) (KiCad packages3D, STEP)
  • 3D model files: sii9233actu-etched.step / sii9233actu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sii9233actu.step / sii9233actu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Lattice datasheet (74 pp, sha256 d8e190a56c8d1046, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF