component
SiI9233ACTU
Public Made by Adomby adom
Lattice Video Interface ICs, TQFP-144(20x20). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
SiI9233ACTU
Lattice · Video Interface ICs · TQFP-144(20x20)
SiI9233ACTU from Lattice, in a TQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 2 | APVCC12 | power_in | Audio clock regeneration PLL analog VCC, must be connected to 1.2 V. |
| 3 | XTALVCC33 | power_in | Audio clock regeneration PLL crystal oscillator power, must be connected to 3.3 V. |
| 4 | XTALOUT | output | Crystal clock output (LVTTL, 4 mA); leave unconnected when XTALIN is driven by a clock. |
| 5 | XTALIN | input | Crystal clock input, 5 V tolerant LVTTL, frequency required 26 MHz to 28.5 MHz. |
| 6 | XTALGND | power_in | Audio clock regeneration ground. |
| 7 | IOVCC33 | power_in | Input/output pin VCC, 3.3 V. |
| 8 | CVCC12 | power_in | Digital logic VCC, 1.2 V. |
| 9 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 10 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 11 | RSVDL | power_in | Reserved, must be tied to ground. |
| 12 | GPIO0/XCLKOUT | bidirectional | Programmable GPIO0 (LVTTL, 4 mA) or additional clock output from the crystal oscillator circuit. |
| 13 | GPIO1/SCDT | bidirectional | Programmable GPIO1 (LVTTL, 4 mA) or sync detection output indicating active video at the HDMI input port. |
| 14 | GPIO2/EVNODD | bidirectional | Programmable GPIO2 (LVTTL, 8 mA) or output indicating even or odd field for interlaced formats. |
| 15 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 16 | GPIO4 | bidirectional | Programmable GPIO4 (LVTTL, 4 mA). |
| 17 | GPIO5 | bidirectional | Programmable GPIO5 (LVTTL, 4 mA). |
| 18 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 19 | GPIO6/DL3 | bidirectional | Programmable GPIO6 (LVTTL, 4 mA) or DSD serial left channel 3 data output. |
| 20 | GPIO7/DR3 | bidirectional | Programmable GPIO7 (LVTTL, 4 mA) or DSD serial right channel 3 data output. |
| 21 | RESET# | input | Active-low reset input, Schmitt, 5 V tolerant. |
| 22 | INT | output | Interrupt output (LVTTL, 4 mA) with configurable polarity and push-pull or open-drain drive; sources enabled through INT_EN register. |
| 23 | CSCL | input | Configuration/status I2C clock, Schmitt, 5 V tolerant. |
| 24 | CSDA | bidirectional | Configuration/status I2C data, Schmitt, 5 V tolerant, 3 mA. |
| 25 | CI2CA | input | Local I2C address select: LOW = 0x60/0x68, HIGH = 0x62/0x6A; 5 V tolerant LVTTL. |
| 26 | CEC_A | bidirectional | HDMI-compliant CEC I/O to the CEC signal of all HDMI connectors, 5 V tolerant, with internal pull-up resistor. |
| 27 | CEC_D | bidirectional | CEC interface to local system, true open-drain, external pull-up required. |
| 28 | SBVCC5 | power_in | Standby power supply, 5 V; all other supplies can be off with SBVCC5 on. |
| 29 | R0PWR5V | input | 5 V power and port detection input for HDMI port 0, used to power internal EDID when device is not powered; 5 V tolerant. |
| 30 | HPD0 | output | Hotplug output signal to HDMI port 0 connector indicating EDID is readable (LVTTL, 4 mA). |
| 31 | DSCL0 | input | DDC I2C clock for port 0, Schmitt open drain, 5 V tolerant, used for HDCP exchange. |
| 32 | DSDA0 | bidirectional | DDC I2C data for port 0, Schmitt open drain, 5 V tolerant, 3 mA. |
| 33 | R1PWR5V | input | 5 V power and port detection input for HDMI port 1, used to power internal EDID when device is not powered; 5 V tolerant. |
| 34 | HPD1 | output | Hotplug output signal to HDMI port 1 connector indicating EDID is readable (LVTTL, 4 mA). |
| 35 | DSCL1 | input | DDC I2C clock for port 1, Schmitt open drain, 5 V tolerant, used for HDCP exchange. |
| 36 | DSDA1 | bidirectional | DDC I2C data for port 1, Schmitt open drain, 5 V tolerant, 3 mA. |
| 37 | R2PWR5V | input | 5 V power and port detection input for HDMI port 2, used to power internal EDID when device is not powered; 5 V tolerant. |
| 38 | HPD2 | output | Hotplug output signal to HDMI port 2 connector indicating EDID is readable (LVTTL, 4 mA). |
| 39 | DSCL2 | input | DDC I2C clock for port 2, Schmitt open drain, 5 V tolerant, used for HDCP exchange. |
| 40 | DSDA2 | bidirectional | DDC I2C data for port 2, Schmitt open drain, 5 V tolerant, 3 mA. |
| 41 | R3PWR5V | input | 5 V power and port detection input for HDMI port 3, used to power internal EDID when device is not powered; 5 V tolerant. |
| 42 | HPD3 | output | Hotplug output signal to HDMI port 3 connector indicating EDID is readable (LVTTL, 4 mA). |
| 43 | DSCL3 | input | DDC I2C clock for port 3, Schmitt open drain, 5 V tolerant, used for HDCP exchange. |
| 44 | DSDA3 | bidirectional | DDC I2C data for port 3, Schmitt open drain, 5 V tolerant, 3 mA. |
| 45 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 46 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 47 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 48 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 49 | RSVDNC | unconnected | Reserved, must be left unconnected. |
| 50 | GND | power_in | Ground. |
| 51 | Q35 | output | Bit 35 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 52 | Q34 | output | Bit 34 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 53 | Q33 | output | Bit 33 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 54 | Q32 | output | Bit 32 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 55 | Q31 | output | Bit 31 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 56 | Q30 | output | Bit 30 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 57 | Q29 | output | Bit 29 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 58 | Q28 | output | Bit 28 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 59 | Q27 | output | Bit 27 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 60 | CVCC12 | power_in | Digital logic VCC, 1.2 V. |
| 61 | IOVCC33 | power_in | Input/output pin VCC, 3.3 V. |
| 62 | Q26 | output | Bit 26 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 63 | Q25 | output | Bit 25 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 64 | Q24 | output | Bit 24 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 65 | Q23 | output | Bit 23 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 66 | Q22 | output | Bit 22 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 67 | Q21 | output | Bit 21 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 68 | Q20 | output | Bit 20 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 69 | Q19 | output | Bit 19 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 70 | Q18 | output | Bit 18 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 71 | CVCC12 | power_in | Digital logic VCC, 1.2 V. |
| 72 | IOVCC33 | power_in | Input/output pin VCC, 3.3 V. |
| 73 | DE | output | Data enable output (LVTTL, drive programmable 2 mA to 14 mA). |
| 74 | VSYNC | output | Vertical sync output, carries sync for embedded and separate sync configurations (LVTTL, 2 mA to 14 mA). |
| 75 | HSYNC | output | Horizontal sync output, carries sync for embedded and separate sync configurations (LVTTL, 2 mA to 14 mA). |
| 76 | ODCK | output | Output data clock (LVTTL, drive programmable 2 mA to 14 mA). |
| 77 | Q17 | output | Bit 17 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 78 | Q16 | output | Bit 16 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 79 | Q15 | output | Bit 15 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 80 | Q14 | output | Bit 14 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 81 | Q13 | output | Bit 13 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 82 | Q12 | output | Bit 12 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 83 | Q11 | output | Bit 11 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 84 | Q10 | output | Bit 10 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 85 | Q9 | output | Bit 9 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 86 | CVCC12 | power_in | Digital logic VCC, 1.2 V. |
| 87 | IOVCC33 | power_in | Input/output pin VCC, 3.3 V. |
| 88 | Q8 | output | Bit 8 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 89 | Q7 | output | Bit 7 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 90 | Q6 | output | Bit 6 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 91 | Q5 | output | Bit 5 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 92 | Q4 | output | Bit 4 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 93 | Q3 | output | Bit 3 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 94 | Q2 | output | Bit 2 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 95 | Q1 | output | Bit 1 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 96 | Q0 | output | Bit 0 of the 36-bit configurable output pixel data bus (LVTTL, 2 mA to 14 mA, can be high impedance). |
| 97 | CVCC12 | power_in | Digital logic VCC, 1.2 V. |
| 98 | IOVCC33 | power_in | Input/output pin VCC, 3.3 V. |
| 99 | WS/DR0 | output | I2S word select output or DSD serial right channel 0 data output (LVTTL, 4 mA). |
| 100 | SCK/DCLK | output | I2S serial clock output or DSD clock output (LVTTL, 4 mA). |
| 101 | SD0/DL0 | output | I2S serial data output or DSD serial left channel 0 data output (LVTTL, 4 mA). |
| 102 | SD1/DR1 | output | I2S serial data output or DSD serial right channel 1 data output (LVTTL, 4 mA). |
| 103 | SD2/DL1 | output | I2S serial data output or DSD serial left channel 1 data output (LVTTL, 4 mA). |
| 104 | SD3/DR2 | output | I2S serial data output or DSD serial right channel 2 data output (LVTTL, 4 mA). |
| 105 | MCLK | output | Audio master clock output (LVTTL, 8 mA). |
| 106 | SPDIF/DL2 | output | S/PDIF audio output or DSD serial left channel 2 data output (LVTTL, 4 mA). |
| 107 | GPIO3/MUTEOUT | bidirectional | Programmable GPIO3 (LVTTL, 4 mA) or mute audio output signal to external downstream audio device. |
| 108 | AVCC33 | power_in | TMDS analog VCC, 3.3 V. |
| 109 | R0XC- | input | HDMI port 0 TMDS input clock pair, negative. |
| 110 | R0XC+ | input | HDMI port 0 TMDS input clock pair, positive. |
| 111 | R0X0- | input | HDMI port 0 TMDS input data pair 0, negative. |
| 112 | R0X0+ | input | HDMI port 0 TMDS input data pair 0, positive. |
| 113 | R0X1- | input | HDMI port 0 TMDS input data pair 1, negative. |
| 114 | R0X1+ | input | HDMI port 0 TMDS input data pair 1, positive. |
| 115 | R0X2- | input | HDMI port 0 TMDS input data pair 2, negative. |
| 116 | R0X2+ | input | HDMI port 0 TMDS input data pair 2, positive. |
| 117 | AVCC12 | power_in | TMDS analog VCC, 1.2 V. |
| 118 | R1XC- | input | HDMI port 1 TMDS input clock pair, negative. |
| 119 | R1XC+ | input | HDMI port 1 TMDS input clock pair, positive. |
| 120 | R1X0- | input | HDMI port 1 TMDS input data pair 0, negative. |
| 121 | R1X0+ | input | HDMI port 1 TMDS input data pair 0, positive. |
| 122 | R1X1- | input | HDMI port 1 TMDS input data pair 1, negative. |
| 123 | R1X1+ | input | HDMI port 1 TMDS input data pair 1, positive. |
| 124 | R1X2- | input | HDMI port 1 TMDS input data pair 2, negative. |
| 125 | R1X2+ | input | HDMI port 1 TMDS input data pair 2, positive. |
| 126 | AVCC33 | power_in | TMDS analog VCC, 3.3 V. |
| 127 | R2XC- | input | HDMI port 2 TMDS input clock pair, negative. |
| 128 | R2XC+ | input | HDMI port 2 TMDS input clock pair, positive. |
| 129 | R2X0- | input | HDMI port 2 TMDS input data pair 0, negative. |
| 130 | R2X0+ | input | HDMI port 2 TMDS input data pair 0, positive. |
| 131 | R2X1- | input | HDMI port 2 TMDS input data pair 1, negative. |
| 132 | R2X1+ | input | HDMI port 2 TMDS input data pair 1, positive. |
| 133 | R2X2- | input | HDMI port 2 TMDS input data pair 2, negative. |
| 134 | R2X2+ | input | HDMI port 2 TMDS input data pair 2, positive. |
| 135 | AVCC12 | power_in | TMDS analog VCC, 1.2 V. |
| 136 | R3XC- | input | HDMI port 3 TMDS input clock pair, negative. |
| 137 | R3XC+ | input | HDMI port 3 TMDS input clock pair, positive. |
| 138 | R3X0- | input | HDMI port 3 TMDS input data pair 0, negative. |
| 139 | R3X0+ | input | HDMI port 3 TMDS input data pair 0, positive. |
| 140 | R3X1- | input | HDMI port 3 TMDS input data pair 1, negative. |
| 141 | R3X1+ | input | HDMI port 3 TMDS input data pair 1, positive. |
| 142 | R3X2- | input | HDMI port 3 TMDS input data pair 2, negative. |
| 143 | R3X2+ | input | HDMI port 3 TMDS input data pair 2, positive. |
| 144 | AVCC33 | power_in | TMDS analog VCC, 3.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-144(20x20) |
| Category | Interface ICs |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| I/O Pin Supply Voltage (abs max) | IOVCC33 | -0.3 | 4 | V | 19 | ||
| TMDS Analog Supply Voltage (abs max) | AVCC12 | -0.3 | 1.9 | V | 19 | ||
| TMDS Analog Supply Voltage (abs max) | AVCC33 | -0.3 | 4 | V | 19 | ||
| Audio PLL Supply Voltage (abs max) | APVCC12 | -0.3 | 1.9 | V | 19 | ||
| Digital Core Supply Voltage (abs max) | CVCC12 | -0.3 | 1.9 | V | 19 | ||
| ACR PLL Crystal Oscillator Supply Voltage (abs max) | XTALVCC33 | -0.3 | 4 | V | 19 | ||
| Standby Supply Voltage (abs max) | SBVCC5 | -0.3 | 5.7 | V | 19 | ||
| Input Voltage | VI | -0.3 | V | Max is IOVCC33 + 0.3 V | 19 | ||
| Input Voltage on 5 V tolerant Pins | V5V-Tolerant | -0.3 | 5.5 | V | 19 | ||
| Junction Temperature | TJ | 125 | C | 19 | |||
| Storage Temperature | TSTG | -65 | 150 | C | 19 | ||
| I/O Pin Supply Voltage | IOVCC33 | 3.13 | 3.3 | 3.47 | V | 20 | |
| TMDS Analog Supply Voltage 1.2 V | AVCC12 | 1.14 | 1.2 | 1.26 | V | 20 | |
| TMDS Analog Supply Voltage 3.3 V | AVCC33 | 3.13 | 3.3 | 3.47 | V | 20 | |
| Audio PLL Supply Voltage | APVCC12 | 1.14 | 1.2 | 1.26 | V | 20 | |
| Digital Core Supply Voltage | CVCC12 | 1.14 | 1.2 | 1.26 | V | 20 | |
| ACR PLL Crystal Oscillator Supply Voltage | XTALVCC33 | 3.13 | 3.3 | 3.47 | V | 20 | |
| Standby Supply Voltage | SBVCC5 | 4.75 | 5 | 5.25 | V | 20 | |
| DDC I2C I/O Reference Voltage | RnPWR5V | 4.7 | 5 | 5.3 | V | 20 | |
| Difference between two 3.3 V Power Pins | DIFF33 | 1 | V | 20 | |||
| Difference between two 1.2 V Power Pins | DIFF12 | 1 | V | 20 | |||
| Difference between any 3.3 V and 1.2 V Pin | DIFF3312 | -1 | 2.6 | V | 20 | ||
| Supply Voltage Noise | VCCN | 100 | mVP-P | 20 | |||
| Ambient Temperature (with power applied) | TA | 0 | 25 | 70 | C | 20 | |
| Ambient Thermal Resistance (Theta JA) | θja | 27 | C/W | 20 | |||
| HIGH-level Input Voltage | VIH | 2 | V | LVTTL | 21 | ||
| LOW-level Input Voltage | VIL | 0.8 | V | LVTTL | 21 | ||
| RESET# LOW to HIGH Threshold | VTH+ | 1.46 | V | RESET# pin, Schmitt | 21 | ||
| RESET# HIGH to LOW Threshold | VTH- | 0.96 | V | RESET# pin, Schmitt | 21 | ||
| DDC LOW to HIGH Threshold | DDC VTH+ | 3 | V | DSDA0, DSDA1, DSCL0 and DSCL1 pins | 21 | ||
| DDC HIGH to LOW Threshold | DDC VTH- | 1.5 | V | DSDA0, DSDA1, DSCL0 and DSCL1 pins | 21 | ||
| Local I2C LOW to HIGH Threshold | Local I2C VTH+ | 2.1 | V | CSCL and CSDA pins | 21 | ||
| Local I2C HIGH to LOW Threshold | Local I2C VTH- | 0.86 | V | CSCL and CSDA pins | 21 | ||
| HIGH-level Output Voltage | VOH | 2.4 | V | LVTTL | 21 | ||
| LOW-level Output Voltage | VOL | 0.4 | V | LVTTL | 21 | ||
| Output Leakage Current | IOL | -10 | 10 | A | High Impedance | 21 | |
| Differential Input Voltage | VID | 75 | 250 | 780 | mV | 21 | |
| 4 mA Digital Output Drive | IOD4 | 4 | mA | VOUT = 2.4 V / VOUT = 0.4 V | 21 | ||
| 8 mA Digital Output Drive | IOD8 | 8 | mA | VOUT = 2.4 V / VOUT = 0.4 V | 21 | ||
| 12 mA Digital Output Drive | IOD12 | 12 | mA | VOUT = 2.4 V / VOUT = 0.4 V | 21 | ||
| Internal Pull Down Resistor | RPD | 25 | 50 | 110 | kΩ | Outputs, IOVCC33 = 3.3 V | 21 |
| Output Pull Down Current | IOPD | 60 | 90 | A | Outputs, IOVCC33 = 3.6 V | 21 | |
| Input Pull Down Current | IIPD | 60 | 90 | A | Input, IOVCC33 = 3.6 V | 21 | |
| Differential Input Clock Frequency | FRXC | 25 | 225 | MHz | 24 | ||
| Differential Input Clock Period | TRXC | 4.44 | 40 | ns | 24 | ||
| Differential Input Clock Jitter tolerance | TIJIT | 400 | ps | 74.25 MHz | 24 | ||
| Rise Time (12/15/18-bit) | DLHT | 1.5 | ns | CL = 10 pF | 24 | ||
| Fall Time (12/15/18-bit) | DHLT | 1.5 | ns | CL = 10 pF | 24 | ||
| ODCK Cycle Time (12/15/18-bit) | RCIP | 12.12 | 40 | ns | CL = 10 pF | 24 | |
| ODCK Frequency (12/15/18-bit) | FCIP | 25 | 82.5 | MHz | CL = 10 pF | 24 | |
| ODCK-to-Output Delay | TCK2OUT | 0.4 | 2.5 | ns | CL = 10 pF | 24 | |
| ODCK Cycle Time (16/20/24/30/36-bit) | RCIP | 6.06 | 40 | ns | CL = 10 pF | 24 | |
| ODCK Frequency (16/20/24/30/36-bit) | FCIP | 25 | 165 | MHz | CL = 10 pF | 24 | |
| SCK to SD or WS Delay | TSCK2SD | -5 | 5 | ns | CL = 10 pF | 25 | |
| Audio Pipeline Delay | TAUDDLY | 40 | 80 | µs | 25 | ||
| MCLK Frequency | FMCLK | 4 | 50 | MHz | CL = 10 pF | 25 | |
| External Crystal Freq. | FXTAL | 26 | 27 | 28.5 | MHz | 25 | |
| Speed on Local I2C Port | FI2C | 400 | kHz | CL = 400 pF | 26 | ||
| RESET# Signal LOW Time for valid reset | TRESET | 50 | µs | 26 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | SiI9233ACTU 25 MHz, 225 MHz HDMI Gold 1080p/60 Hz 144-pin TQFP ePad Extended (-30 °C to +85 °C) | 71 |
CAD (KiCad official)
- Symbol:
SiI9233ACTU - Footprint:
Package_QFP:TQFP-144_20x20mm_P0.5mm - 3D model: TQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
sii9233actu-etched.step/sii9233actu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sii9233actu.step/sii9233actu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (74 pp, sha256
d8e190a56c8d1046, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).