Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NY8A054ES8

JSMSEMI · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8

NY8A054ES8 from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply; operating range 2.0V to 5.5V at system clock up to 8MHz and 2.2V to 5.5V above 8MHz.
2 PA7/Xout bidirectional Bidirectional I/O PA7 with pull-high option, usable as crystal oscillator output Xout or as instruction clock output.
3 PA6/Xin bidirectional Bidirectional I/O PA6 with pull-high option, usable as crystal oscillator input Xin; pull-high should not be enabled in crystal mode.
4 PA5/RSTb/Vpp bidirectional Input or open-drain output PA5 that can be the active-low reset pin RSTb, and above 7.75V it enters EPROM programming mode (Vpp).
5 PA4/PWM1/EX_CKI0/SCK bidirectional Bidirectional I/O PA4 that can output PWM1, serve as Timer0/1 external clock EX_CKI0, or be programming pad SCK.
6 PA3/PWM3/SDO bidirectional Bidirectional I/O PA3 that can be a comparator analog input, output PWM3, or be programming pad SDO.
7 PA2/PWM4/INT1/SDI bidirectional Bidirectional I/O PA2 that can be a comparator analog input, output PWM4, be external interrupt input INT1, or be programming pad SDI.
8 VSS power_in Ground.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOP-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDD - VSS) VDD - VSS -0.5 6 V 93
Operating temperature TOP -40 85 °C 93
Storage temperature TST -40 125 °C 93
Recommended operating voltage, 20M/2T 3 5.5 V Frequency 20M/2T; temperature range -40°C ~ +85°C 97
Recommended operating voltage, 16M/2T 2.4 5.5 V Frequency 16M/2T; temperature range -40°C ~ +85°C 97
Recommended operating voltage, 20M/4T 2 5.5 V Frequency 20M/4T; temperature range -40°C ~ +85°C 97
Recommended operating voltage, 16M/4T 1.8 5.5 V Frequency 16M/4T; temperature range -40°C ~ +85°C 97
Recommended operating voltage, 8M (2T or 4T) 1.8 5.5 V Frequency 8M (2T or 4T); temperature range -40°C ~ +85°C 97
Recommended operating voltage, ≦6M (2T or 4T) 1.8 5.5 V Frequency ≦6M (2T or 4T); temperature range -40°C ~ +85°C 97
Operating voltage, FINST=20MHz @ I_HRC/2 VDD 3 5.5 V FINST=20MHz @ I_HRC/2 93
Operating voltage, FINST=20MHz @ I_HRC/4 VDD 2 V FINST=20MHz @ I_HRC/4 93
Operating voltage, FINST=16MHz @ E_HXT/2 VDD 2.4 V FINST=16MHz @ E_HXT/2 93
Operating voltage, FINST=16MHz @ E_HXT/4 VDD 1.8 V FINST=16MHz @ E_HXT/4 93
Operating voltage, FINST=8MHz @ I_HRC/4 & I_HRC/2 VDD 1.8 V FINST=8MHz @ I_HRC/4 & I_HRC/2 93
Operating voltage, FINST=8MHz @ E_HXT/4 & E_HXT/2 VDD 1.8 V FINST=8MHz @ E_HXT/4 & E_HXT/2 93
Operating voltage, FINST=4MHz @ I_HRC/4 & I_HRC/2 VDD 1.8 V FINST=4MHz @ I_HRC/4 & I_HRC/2 93
Operating voltage, FINST=4MHz @ E_XT/4 & E_XT/2 VDD 1.8 V FINST=4MHz @ E_XT/4 & E_XT/2 93
Operating voltage, FINST=32KHz @ I_LRC/4 & I_LRC/2 VDD 1.8 V FINST=32KHz @ I_LRC/4 & I_LRC/2 93
Operating voltage, FINST=32KHz @ E_LXT/4 & E_LXT/2 VDD 1.8 V FINST=32KHz @ E_LXT/4 & E_LXT/2 93
Input high voltage, RSTb VIH 4 V VDD=5V; RSTb (0.8 VDD) 93
Input high voltage, RSTb VIH 2.4 V VDD=3V; RSTb (0.8 VDD) 93
Input high voltage, all other I/O pins, EX_CKI, INT VIH 3.5 V VDD=5V; All other I/O pins, EX_CKI, INT 93
Input high voltage, all other I/O pins, EX_CKI, INT (CMOS option) VIH 2.1 V VDD=3V; CMOS option (0.7 VDD); All other I/O pins, EX_CKI, INT 93
Input high voltage, all other I/O pins, EX_CKI VIH 2.5 V VDD=5V; All other I/O pins, EX_CKI 93
Input high voltage, all other I/O pins, EX_CKI (TTL option) VIH 1.5 V VDD=3V; TTL option (0.5 VDD); All other I/O pins, EX_CKI 93
Input low voltage, RSTb VIL 1 V VDD=5V; RSTb (0.2 VDD) 93
Input low voltage, RSTb VIL 0.6 V VDD=3V; RSTb (0.2 VDD) 93
Input low voltage, all other I/O pins, EX_CKI, INT VIL 1.5 V VDD=5V; All other I/O pins, EX_CKI, INT 93
Input low voltage, all other I/O pins, EX_CKI, INT (CMOS option) VIL 0.9 V VDD=3V; CMOS option (0.3 VDD); All other I/O pins, EX_CKI, INT 93
Input low voltage, all other I/O pins, EX_CKI VIL 1 V VDD=5V; All other I/O pins, EX_CKI 93
Input low voltage, all other I/O pins, EX_CKI (TTL option) VIL 0.6 V VDD=3V; TTL option (0.2 VDD); All other I/O pins, EX_CKI 93
Halt current, WDT disabled IHALT 0.5 uA VDD=5V; Halt mode, WDT disabled 94
Halt current, WDT disabled IHALT 0.2 uA VDD=3V; Halt mode, WDT disabled 94
Halt current, WDT enabled IHALT 5 uA VDD=5V; Halt mode, WDT enabled 94
Halt current, WDT enabled IHALT 2 uA VDD=3V; Halt mode, WDT enabled 94
Comparator input voltage range VIVR 0 5 V FHOSC=1MHz 95
LVD voltage error ELVD 3 % FHOSC=1MHz, LVD=4.3V 95
I_HRC deviation by socket -1 1 % Socket installed directly on writer 95
I_HRC deviation by handler -3 3 % Handler condition with correct setup 95
I_LRC deviation by handler -5 5 % 95

CAD (KiCad official)

  • Symbol: NY8A054ES8
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ny8a054es8-etched.step / ny8a054es8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ny8a054es8.step / ny8a054es8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (100 pp, sha256 63bca23e86093da5, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF