Generated by kicad-footprint-generator · KiCad file format 20260206
NY8A054ES8
JSMSEMI · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8
NY8A054ES8 from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply; operating range 2.0V to 5.5V at system clock up to 8MHz and 2.2V to 5.5V above 8MHz. |
| 2 | PA7/Xout | bidirectional | Bidirectional I/O PA7 with pull-high option, usable as crystal oscillator output Xout or as instruction clock output. |
| 3 | PA6/Xin | bidirectional | Bidirectional I/O PA6 with pull-high option, usable as crystal oscillator input Xin; pull-high should not be enabled in crystal mode. |
| 4 | PA5/RSTb/Vpp | bidirectional | Input or open-drain output PA5 that can be the active-low reset pin RSTb, and above 7.75V it enters EPROM programming mode (Vpp). |
| 5 | PA4/PWM1/EX_CKI0/SCK | bidirectional | Bidirectional I/O PA4 that can output PWM1, serve as Timer0/1 external clock EX_CKI0, or be programming pad SCK. |
| 6 | PA3/PWM3/SDO | bidirectional | Bidirectional I/O PA3 that can be a comparator analog input, output PWM3, or be programming pad SDO. |
| 7 | PA2/PWM4/INT1/SDI | bidirectional | Bidirectional I/O PA2 that can be a comparator analog input, output PWM4, be external interrupt input INT1, or be programming pad SDI. |
| 8 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD - VSS) | VDD - VSS | -0.5 | 6 | V | 93 | ||
| Operating temperature | TOP | -40 | 85 | °C | 93 | ||
| Storage temperature | TST | -40 | 125 | °C | 93 | ||
| Recommended operating voltage, 20M/2T | 3 | 5.5 | V | Frequency 20M/2T; temperature range -40°C ~ +85°C | 97 | ||
| Recommended operating voltage, 16M/2T | 2.4 | 5.5 | V | Frequency 16M/2T; temperature range -40°C ~ +85°C | 97 | ||
| Recommended operating voltage, 20M/4T | 2 | 5.5 | V | Frequency 20M/4T; temperature range -40°C ~ +85°C | 97 | ||
| Recommended operating voltage, 16M/4T | 1.8 | 5.5 | V | Frequency 16M/4T; temperature range -40°C ~ +85°C | 97 | ||
| Recommended operating voltage, 8M (2T or 4T) | 1.8 | 5.5 | V | Frequency 8M (2T or 4T); temperature range -40°C ~ +85°C | 97 | ||
| Recommended operating voltage, ≦6M (2T or 4T) | 1.8 | 5.5 | V | Frequency ≦6M (2T or 4T); temperature range -40°C ~ +85°C | 97 | ||
| Operating voltage, FINST=20MHz @ I_HRC/2 | VDD | 3 | 5.5 | V | FINST=20MHz @ I_HRC/2 | 93 | |
| Operating voltage, FINST=20MHz @ I_HRC/4 | VDD | 2 | V | FINST=20MHz @ I_HRC/4 | 93 | ||
| Operating voltage, FINST=16MHz @ E_HXT/2 | VDD | 2.4 | V | FINST=16MHz @ E_HXT/2 | 93 | ||
| Operating voltage, FINST=16MHz @ E_HXT/4 | VDD | 1.8 | V | FINST=16MHz @ E_HXT/4 | 93 | ||
| Operating voltage, FINST=8MHz @ I_HRC/4 & I_HRC/2 | VDD | 1.8 | V | FINST=8MHz @ I_HRC/4 & I_HRC/2 | 93 | ||
| Operating voltage, FINST=8MHz @ E_HXT/4 & E_HXT/2 | VDD | 1.8 | V | FINST=8MHz @ E_HXT/4 & E_HXT/2 | 93 | ||
| Operating voltage, FINST=4MHz @ I_HRC/4 & I_HRC/2 | VDD | 1.8 | V | FINST=4MHz @ I_HRC/4 & I_HRC/2 | 93 | ||
| Operating voltage, FINST=4MHz @ E_XT/4 & E_XT/2 | VDD | 1.8 | V | FINST=4MHz @ E_XT/4 & E_XT/2 | 93 | ||
| Operating voltage, FINST=32KHz @ I_LRC/4 & I_LRC/2 | VDD | 1.8 | V | FINST=32KHz @ I_LRC/4 & I_LRC/2 | 93 | ||
| Operating voltage, FINST=32KHz @ E_LXT/4 & E_LXT/2 | VDD | 1.8 | V | FINST=32KHz @ E_LXT/4 & E_LXT/2 | 93 | ||
| Input high voltage, RSTb | VIH | 4 | V | VDD=5V; RSTb (0.8 VDD) | 93 | ||
| Input high voltage, RSTb | VIH | 2.4 | V | VDD=3V; RSTb (0.8 VDD) | 93 | ||
| Input high voltage, all other I/O pins, EX_CKI, INT | VIH | 3.5 | V | VDD=5V; All other I/O pins, EX_CKI, INT | 93 | ||
| Input high voltage, all other I/O pins, EX_CKI, INT (CMOS option) | VIH | 2.1 | V | VDD=3V; CMOS option (0.7 VDD); All other I/O pins, EX_CKI, INT | 93 | ||
| Input high voltage, all other I/O pins, EX_CKI | VIH | 2.5 | V | VDD=5V; All other I/O pins, EX_CKI | 93 | ||
| Input high voltage, all other I/O pins, EX_CKI (TTL option) | VIH | 1.5 | V | VDD=3V; TTL option (0.5 VDD); All other I/O pins, EX_CKI | 93 | ||
| Input low voltage, RSTb | VIL | 1 | V | VDD=5V; RSTb (0.2 VDD) | 93 | ||
| Input low voltage, RSTb | VIL | 0.6 | V | VDD=3V; RSTb (0.2 VDD) | 93 | ||
| Input low voltage, all other I/O pins, EX_CKI, INT | VIL | 1.5 | V | VDD=5V; All other I/O pins, EX_CKI, INT | 93 | ||
| Input low voltage, all other I/O pins, EX_CKI, INT (CMOS option) | VIL | 0.9 | V | VDD=3V; CMOS option (0.3 VDD); All other I/O pins, EX_CKI, INT | 93 | ||
| Input low voltage, all other I/O pins, EX_CKI | VIL | 1 | V | VDD=5V; All other I/O pins, EX_CKI | 93 | ||
| Input low voltage, all other I/O pins, EX_CKI (TTL option) | VIL | 0.6 | V | VDD=3V; TTL option (0.2 VDD); All other I/O pins, EX_CKI | 93 | ||
| Halt current, WDT disabled | IHALT | 0.5 | uA | VDD=5V; Halt mode, WDT disabled | 94 | ||
| Halt current, WDT disabled | IHALT | 0.2 | uA | VDD=3V; Halt mode, WDT disabled | 94 | ||
| Halt current, WDT enabled | IHALT | 5 | uA | VDD=5V; Halt mode, WDT enabled | 94 | ||
| Halt current, WDT enabled | IHALT | 2 | uA | VDD=3V; Halt mode, WDT enabled | 94 | ||
| Comparator input voltage range | VIVR | 0 | 5 | V | FHOSC=1MHz | 95 | |
| LVD voltage error | ELVD | 3 | % | FHOSC=1MHz, LVD=4.3V | 95 | ||
| I_HRC deviation by socket | -1 | 1 | % | Socket installed directly on writer | 95 | ||
| I_HRC deviation by handler | -3 | 3 | % | Handler condition with correct setup | 95 | ||
| I_LRC deviation by handler | -5 | 5 | % | 95 |
CAD (KiCad official)
- Symbol:
NY8A054ES8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ny8a054es8-etched.step/ny8a054es8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ny8a054es8.step/ny8a054es8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (100 pp, sha256
63bca23e86093da5, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).