Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F10BBGLNA#W5

RENESAS · RENESAS · HVQFN-32-EP(5x5)

R5F10BBGLNA#W5 from RENESAS, in a HVQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P120/ANI25/TI07/TO07/TRDIOD0/SO01/INTP4 bidirectional Port 12 I/O pin powered from VDD in 32-pin products, with analog input ANI25, timer TI07/TO07, Timer RD TRDIOD0, CSI01 data output SO01 and external interrupt INTP4 alternate functions; after reset it is an analog input port.
2 P41/TI10/TO10/TRJIO0/SNZOUT2 bidirectional Port 4 I/O pin with timer TI10/TO10, Timer RJ TRJIO0 and SNOOZE status output SNZOUT2 alternate functions; after reset it is an input port.
3 P40/TOOL0 bidirectional Port 4 I/O pin that is the flash programmer/debugger data I/O TOOL0; it must be pulled up externally when on-chip debugging is enabled, and its level after reset release selects normal operation (high) or flash programming mode (0 V).
4 RESET input Active-low system reset input; connect directly or via a resistor to VDD when not used.
5 P137/INTP0 input Input-only port 13 pin that also serves as external interrupt request input INTP0 with selectable valid edge.
6 P122/X2/EXCLK input Input port 12 pin that is the main system clock resonator connection X2 or external clock input EXCLK.
7 P121/X1 input Input port 12 pin that is the main system clock resonator connection X1.
8 REGC passive Regulator output stabilization capacitor connection for internal operation; connect to VSS via a 0.47 to 1 µF capacitor.
9 VSS power_in Ground potential pin for all pins in the 32-pin product.
10 VDD power_in Positive power supply pin for all pins in the 32-pin product (supply voltage range 2.7 V to 5.5 V).
11 P60/(SCK00)/(SCL00) bidirectional Port 6 I/O pin that can be N-ch open-drain output and has an input threshold level setting, with CSI00 clock SCK00 and simplified I2C clock SCL00 assignable via PIOR.
12 P61/(SI00)/(SDA00)/(RXD0) bidirectional Port 6 I/O pin that can be N-ch open-drain output, with CSI00 data input SI00, simplified I2C data SDA00 and UART0 receive RXD0 assignable via PIOR.
13 P62/(SO00)/(TXD0)/SCLA0 bidirectional Port 6 I/O pin that can use a TTL input buffer and N-ch open-drain output, with IICA0 clock SCLA0 and CSI00 data output SO00 or UART0 transmit TXD0 assignable via PIOR.
14 P63/(SSI00)/SDAA0 bidirectional Port 6 I/O pin that can use a TTL input buffer and N-ch open-drain output, with IICA0 data I/O SDAA0 and CSI00 slave select input SSI00 assignable via PIOR.
15 P30/TI01/TO01/TRDIOD1/SSI00/INTP2/SNZOUT0 bidirectional Port 3 I/O pin that can use a TTL input buffer and an on-chip pull-up, with timer TI01/TO01, Timer RD TRDIOD1, slave select SSI00, interrupt INTP2 and SNOOZE output SNZOUT0 alternate functions.
16 P17/TI00/TO00/TRDIOB1/SCK00/SCL00/INTP3 bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI00/TO00, Timer RD TRDIOB1, CSI00 clock SCK00, simplified I2C clock SCL00 and interrupt INTP3 alternate functions.
17 P16/TI02/TO02/TRDIOC1/SI00/SDA00/RXD0/TOOLRXD bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI02/TO02, Timer RD TRDIOC1, CSI00 data input SI00, simplified I2C data SDA00, UART0 receive RXD0 and programming UART receive TOOLRXD alternate functions.
18 P15/TI05/TO05/TRDIOA1/(TRDIOA0)/(TRDCLK0)/SO00/TXD0/TOOLTXD/RTC1HZ bidirectional Port 1 I/O pin that can be N-ch open-drain output, with timer TI05/TO05, Timer RD TRDIOA1, CSI00 data output SO00, UART0 transmit TXD0, programming UART transmit TOOLTXD and RTC 1 Hz output RTC1HZ alternate functions.
19 P14/TI06/TO06/TRDIOC0/SCK01/SCL01/LRXD0 bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI06/TO06, Timer RD TRDIOC0, CSI01 clock SCK01, simplified I2C clock SCL01 and LIN receive LRXD0 alternate functions.
20 P13/TI04/TO04/TRDIOA0/TRDCLK0/SI01/SDA01/LTXD0 bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI04/TO04, Timer RD TRDIOA0/TRDCLK0, CSI01 data input SI01, simplified I2C data SDA01 and LIN transmit LTXD0 alternate functions.
21 P12/TI11/TO11/(TRDIOD0)/INTP5/SO10/TXD1/SNZOUT3 bidirectional Port 1 I/O pin that can be N-ch open-drain output, with timer TI11/TO11, interrupt INTP5, CSI10 data output SO10, UART1 transmit TXD1 and SNOOZE output SNZOUT3 alternate functions.
22 P11/TI12/TO12/(TRDIOB0)/SI10/SDA10/RXD1/CRXD0 bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI12/TO12, CSI10 data input SI10, simplified I2C data SDA10, UART1 receive RXD1 and CAN receive CRXD0 alternate functions.
23 P10/TI13/TO13/TRJO0/SCK10/SCL10/CTXD0 bidirectional Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI13/TO13, Timer RJ output TRJO0, CSI10 clock SCK10, simplified I2C clock SCL10 and CAN transmit CTXD0 alternate functions.
24 P33/AVREFP/ANI0 bidirectional Port 3 I/O pin that can be set to analog input, serving as A/D converter reference voltage (+ side) input AVREFP or analog input ANI0.
25 P34/AVREFM/ANI1 bidirectional Port 3 I/O pin that can be set to analog input, serving as A/D converter reference voltage (- side) input AVREFM or analog input ANI1.
26 P80/ANI2/(KR0) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI2, with key interrupt input KR0 assignable via PIOR.
27 P81/ANI3/(KR1) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI3, with key interrupt input KR1 assignable via PIOR.
28 P82/ANI4/(KR2) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI4, with key interrupt input KR2 assignable via PIOR.
29 P83/ANI5/(KR3) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI5, with key interrupt input KR3 assignable via PIOR.
30 P84/ANI6/(KR4) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI6, with key interrupt input KR4 assignable via PIOR.
31 P85/ANI7/(KR5) bidirectional Port 8 I/O pin that can be set to A/D converter analog input ANI7, with key interrupt input KR5 assignable via PIOR.
32 P125/ANI24/TI03/TO03/TRDIOB0/SSI01/INTP1/SNZOUT1 bidirectional Port 12 I/O pin that can use a TTL input buffer and an on-chip pull-up, with analog input ANI24, timer TI03/TO03, Timer RD TRDIOB0, slave select SSI01, interrupt INTP1 and SNOOZE output SNZOUT1 alternate functions.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package HVQFN-32-EP(5x5)
Category Embedded Processors & Controllers
Pins 33

CAD (KiCad official)

  • Symbol: R5F10BBGLNA#W5
  • Footprint: Package_DFN_QFN:HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
  • 3D model: HVQFN-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: r5f10bbglna-w5-etched.step / r5f10bbglna-w5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f10bbglna-w5.step / r5f10bbglna-w5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (1879 pp, sha256 737b915299275df9, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF